Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 20cm 2-pin Dupont cable with female connectors on both ends at 2.54mm pitch. The twisted red and black wires keep polarity clear and wiring neat in compact breadboard and header builds.

Key Highlights

  • 2-pin female Dupont connectors on both ends
  • Standard 2.54mm pitch for breadboards and headers
  • Twisted red and black conductors for easy polarity tracing
  • Flexible PVC insulation for repeated handling
  • 20cm length suited to compact builds
  • Rated for -25°C to +85°C operating temperature

Ideal For

  • Makers prototyping on solderless breadboards
  • Students learning embedded electronics
  • Engineers testing Arduino, AVR or PIC circuits
  • Hobbyists wiring 2.54mm sensor modules
  • Anyone needing a short female-to-female jumper

Buying Tip

Confirm the pins you want to join are male and spaced at 2.54mm, because a female-to-female lead cannot mate with another female header.

Elecvora expert review

Our verdict

A simple, well-made jumper that does one job cleanly: joining two 2.54mm female points with a short, colour-coded lead. The twisted pair is a small but genuinely useful touch when wiring gets busy.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Female connectors on both ends for direct header-to-header links
  • Twisted red and black wires simplify polarity checks
  • Short 20cm length keeps compact builds tidy
  • Flexible PVC insulation survives repeated use

Cons

  • Only two contacts, so it cannot carry multi-signal buses
  • Will not mate with female headers without an adapter
  • Pin order can be reversed if the housing is rotated

Best for

Short 2.54mm female-to-female links in breadboard and header prototyping

Not ideal for

Multi-channel harnesses or connections that need male pins

Specifications

Shipping Weight0.004 kg
Shipping Dimensions8 × 4 × 2 cm

What's in the box

  • 1 x 2pin 2.54mm Twist Female to Female Dupont Cable

Frequently Asked Questions

What does female to female mean on this cable?
Both ends have female Dupont housings, so each end plugs onto male pins. It is used to join two male headers or two breadboard rows.
Will it fit a standard breadboard?
Yes. The 2.54mm pitch matches common solderless breadboards and standard through-hole pin headers.
Can I use it with an Arduino board?
It is commonly used with Arduino, AVR and PIC boards, provided the connection point presents male pins at 2.54mm spacing.
Does it carry power?
The cable is a passive conductor pair with no stated current rating. Use it for low-power signal and ground links typical of prototyping.
What is included in the package?
One 2-pin 2.54mm twist female to female Dupont cable, 20cm long.
How should I store and care for it?
Coil it loosely, avoid sharp bends near the connectors, and pull on the housing rather than the wire when unplugging.

Overview

This 2-pin Dupont cable is a short, ready-made connection between two 2.54mm female points. Both ends carry female Dupont housings, so the lead plugs onto exposed male pins, header rows or breadboard positions without cutting, crimping or soldering. The two conductors are twisted together in red and black, which helps you track signal and ground when several cables run in parallel.

At 20cm, it sits well in small enclosures and dense breadboard layouts where longer leads become hard to manage. The PVC insulation keeps the cable flexible enough for repeated insertion and removal during prototyping and testing.

Key Features

  • Dual female ends: connect two pin headers, two breadboard rows or a module and a board directly.
  • 2.54mm pitch: matches the common spacing used on breadboards and standard pin headers.
  • Twisted red and black wires: colour coding makes polarity and signal routing easier to read.
  • PVC insulation: flexible covering that protects the conductors during handling.
  • 20cm length: enough reach for compact builds without excess slack.
  • Wide temperature range: rated from -25°C to +85°C.

Specifications Explained

Contact count: two contacts per connector, so the cable carries one pair of signals or a signal and a ground return. It is not a multi-channel ribbon.

Pitch: the 2.54mm spacing is the de facto standard for through-hole headers and solderless breadboards, so the housing lines up with adjacent pins.

Connector type: both ends are female Dupont, meaning they accept male pins. To join two female headers you would need a different lead.

Length and weight: the 20cm cable weighs about 2g, so it adds almost nothing to a build and stays out of the way in tight layouts.

Temperature: the -25°C to +85°C range covers normal indoor prototyping and most hobby environments.

Compatibility and Requirements

The cable fits any interface using 2.54mm male pins, including breadboards, standard pin headers and Dupont-compatible modules. It is commonly used with Arduino, AVR and PIC boards. No tools are required, but the mating side must present male pins at 2.54mm spacing. Check pin order before powering up, since the twisted pair can be rotated in the housing.

Typical Uses

  • Linking two rows of a solderless breadboard
  • Connecting a sensor or module board to a development board
  • Jumpering header pins during circuit testing
  • Classroom and lab exercises in embedded electronics
  • Quick rewiring during prototyping iterations

What's in the Box

1 x 2-pin 2.54mm twist female to female Dupont cable.

Quick specs

Shipping Weight
0.004 kg
Shipping Dimensions
8 × 4 × 2 cm
See all specifications