
1 / 7 · Click to enlarge
AI Summary
This adapter board safely connects 24L01 wireless modules to 5V systems by regulating voltage to 1.9–3.6V DC. Its compact size and onboard LED make it a practical addition to any wireless project.
Key Highlights
- Regulates 4.8–12V input to 1.9–3.6V DC output
- Onboard bypass capacitors for stable operation
- Compact 26 x 19 x 12 mm board weighs only 3 g
- Power-on SMD LED indicator
- Works with nRF24L01-type transceivers
- Easy connection to 5V microcontrollers like Arduino
Ideal For
- Arduino hobbyists adding wireless capability
- Electronics students learning about voltage regulation
- Makers building remote sensors or controllers
- DIY enthusiasts working with nRF24L01 modules
- Prototypers needing a compact adapter board
Buying Tip
Check that your power supply voltage stays within the 4.8V to 12V range to avoid damaging the regulator.
Elecvora expert review
Our verdict
This adapter board is a simple, effective solution for powering 24L01 modules from 5V systems. Its compact size and onboard regulation make it a reliable choice for wireless projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Regulates voltage to safe 1.9–3.6V range
- Compact and lightweight design
- Onboard LED for power indication
Cons
- Requires soldering or jumper wires for connections
- No mounting holes for secure attachment
Best for
Arduino users integrating nRF24L01 modules
Not ideal for
Projects requiring pre-soldered headers or mounting holes
Specifications
| Model No. / Name | Adapter Board |
|---|---|
| Output Voltage | 1.9~3.6V DC |
| Operating Current (mA) | 12 mA |
| Dimensions (L x W x H) mm | 26 x 19 x 12 |
| Weight (g) | 3g |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 4 × 2 × 2 cm |
What's in the box
- 1 x 3.3V Adapter Board for 24L01 Wireless Module
Frequently Asked Questions
What is the purpose of this adapter board?
Can I use this with any 24L01 module?
What input voltage does the board accept?
Does the board come with headers or cables?
Is there an indicator light?
What are the dimensions and weight?
Overview
The Generic 3.3V Adapter Board for 24L01 Wireless Module is a compact breakout board designed to interface nRF24L01-type transceivers with 5V systems. Many microcontrollers, including Arduino boards, operate at 5V, while the 24L01 modules require a lower voltage. This adapter solves that mismatch by accepting a 4.8V to 12V input and providing a regulated 1.9–3.6V DC output. Onboard bypass capacitors help maintain a clean power supply, and a small SMD LED indicates when the board is powered.
Key Features
- Onboard voltage regulator accepts 4.8V to 12V input and outputs 1.9–3.6V DC
- Bypass capacitors for reliable operation
- Power-on SMD LED indicator
- Compact dimensions: 26 x 19 x 12 mm
- Lightweight: just 3 g
- Easy connection to nRF24L01+ modules
Specifications Explained
Output Voltage: The board provides a regulated output between 1.9V and 3.6V DC, which is the safe operating range for 24L01 wireless modules. This protects the transceiver from the higher voltages used by many development boards.
Operating Current: The adapter draws only 12 mA, so it adds minimal load to your power supply.
Dimensions and Weight: At 26 x 19 x 12 mm and 3 g, the board is small and light enough to fit into tight enclosures or wearable projects without adding bulk.
Input Voltage: The regulator accepts 4.8V to 12V, making it compatible with common 5V and 9V supplies. For best results, keep the input below 12V.
Compatibility and Requirements
This adapter is intended for use with nRF24L01-type wireless transceivers. It connects to a 5V system, such as an Arduino, and provides the correct voltage for the module. No additional components are required for basic operation. Ensure your power supply provides between 4.8V and 12V DC.
Typical Uses
- Adding wireless communication to Arduino projects
- Prototyping with nRF24L01 modules on 5V systems
- DIY remote controls and sensor networks
- Educational electronics labs
- Home automation and IoT prototypes
What's in the Box
1 x 3.3V Adapter Board for 24L01 Wireless Module
Quick specs
- Model No. / Name
- Adapter Board
- Output Voltage
- 1.9~3.6V DC
- Operating Current (mA)
- 12 mA
- Dimensions (L x W x H) mm
- 26 x 19 x 12
- Weight (g)
- 3g
- Shipping Weight
- 0.005 kg
















