Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This set includes two 8520 coreless brushed motors (CW and CCW) and two 55 mm glass fiber propellers. It is a simple, matched solution for powering small indoor racing drones.

Key Highlights

  • Includes 2 CW and 2 CCW 8520 coreless brushed motors
  • 55 mm glass fiber propellers resist crash damage
  • Rated 3.3 V, 0.15 A, up to 39,000 RPM
  • 1 mm shaft and 8.5 mm motor diameter for micro frames
  • Lightweight at 0.06 kg shipping weight
  • Plug-and-play wiring with color-coded leads

Ideal For

  • Indoor racing drone builders
  • DIY micro quadcopter hobbyists
  • Beginners learning brushed motor setups
  • Pilots replacing worn 8520 motors
  • Small frame experimenters

Buying Tip

Check that your frame and propellers accept a 1 mm shaft and that your battery is 1S (3.3 V nominal) before buying this set.

Elecvora expert review

Our verdict

This set offers a convenient way to get a micro quadcopter running with minimal fuss, thanks to the included CW and CCW motors and matching props. The coreless motors are light and responsive, though they lack the torque of brushless systems.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Complete set with both rotation directions
  • Lightweight and simple to wire
  • Durable glass fiber propellers
  • Low cost compared to brushless setups

Cons

  • Brushed motors have limited lifespan
  • Low torque may not suit aggressive flying
  • Requires soldering to connect

Best for

Indoor micro drone builds and beginners

Not ideal for

High-performance outdoor racing or heavy payloads

Specifications

Motor TypeBrushed motor
Rated Voltage (VDC)3.3
Rated Current (A)0.15
Operating Temperature (°C)-10 to 50
Rated Speed (RPM)30500, 39000
Rated Load Current (mA)1620
Shaft Diameter1 mm
ColorSilver
Motor diameter (mm)8.5
Motor Length (mm)20
Motor MaterialMetal
Prop. Length(mm)55
Prop. MaterialGlass Fiber
Cable Length6
Shipping Weight0.06 kg
Shipping Dimensions15 × 10 × 6 cm

What's in the box

  • 2 x 8520 coreless motor (CW)
  • 2 x 8520 coreless motor (CCW)
  • 2 x 55 mm propeller (1 red, 1 black)

Frequently Asked Questions

What battery should I use with these motors?
These motors are rated for 3.3 V, so a 1S LiPo battery is appropriate. Do not exceed the rated voltage to avoid overheating.
Are the propellers included compatible with the motors?
Yes, the included 55 mm propellers have a 1 mm bore that matches the motor shafts. They are designed for use with 8520 coreless motors.
How do I know which motor is CW and which is CCW?
The CW motor has red and blue wires, while the CCW motor has black and white wires. You can also check the marking on the motor label.
Can I use these motors with a different frame?
They are intended for micro frames around 100 mm class. Check that your frame accepts 8.5 mm diameter motors and 1 mm shafts.
Do I need to solder the motor wires?
Yes, the motor leads are bare wires that require soldering to your flight controller or ESC. There are no plug-and-play connectors included.
How do I maintain these motors?
Keep them clean and avoid crashing into dirt or moisture. Brushed motors may need occasional replacement after extended use due to brush wear.

Overview

This combo brings together four 8520 coreless brushed motors (two CW and two CCW) and two 55 mm propellers, giving you a matched set for small indoor quadcopters. The motors are compact at 8.5 mm diameter and 20 mm length, with 1 mm shafts that fit the included props. They operate on 3.3 V and draw 0.15 A rated current, spinning at either 30,500 or 39,000 RPM depending on load. The glass fiber propellers are lightweight and tough enough for indoor flying.

Key Features

  • Complete motor set: Two CW and two CCW motors let you build a full quad without ordering separate rotation directions.
  • High-speed coreless design: Coreless construction keeps weight low and response quick, with rated speeds up to 39,000 RPM.
  • Durable propellers: 55 mm props made from glass fiber resist damage from minor impacts.
  • Simple wiring: Color-coded leads (red/blue for CW, black/white for CCW) make polarity easy to identify.
  • Compact and light: The entire set ships at just 0.06 kg, ideal for micro builds.

Specifications Explained

Motor type: Brushed coreless motors are simpler to drive than brushless motors and work well for small, low-cost builds. Rated voltage: 3.3 V means these are intended for 1S lithium battery setups. Rated current: 0.15 A is the nominal draw, while the rated load current of 1620 mA indicates the maximum under load. Speed: The two RPM figures (30,500 and 39,000) reflect performance at different loads; higher RPM gives more thrust for indoor racing. Shaft diameter: 1 mm matches the included propellers and many micro props. Operating temperature: -10 to 50 °C covers typical indoor and outdoor conditions. Propeller length: 55 mm is a common size for micro quadcopters and pairs well with 8520 motors.

Compatibility and Requirements

These motors are designed for 1S LiPo batteries and are compatible with 55 mm propellers (included). They suit micro quadcopter frames around 100 mm class. The 1 mm shaft diameter fits props with matching bore. No additional motor mounts or adapters are required for standard micro frames. Wiring requires basic soldering to your flight controller or ESC.

Typical Uses

Ideal for indoor racing drones, DIY micro quadcopters, and replacing worn motors in small brushed builds. The set is also useful for hobbyists experimenting with coreless motor performance in lightweight projects.

What's in the Box

  • 2 x 8520 coreless motor (CW)
  • 2 x 8520 coreless motor (CCW)
  • 2 x 55 mm propeller (1 red, 1 black)

Quick specs

Motor Type
Brushed motor
Rated Voltage (VDC)
3.3
Rated Current (A)
0.15
Operating Temperature (°C)
-10 to 50
Rated Speed (RPM)
30500, 39000
Rated Load Current (mA)
1620
See all specifications