Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 70CM 3 Pin Female to Female Dupont Cable is a 26 AWG jumper wire for 3D printers and electronics projects. It provides a convenient 70 cm reach with 3-pin female connectors on both ends, and comes as a 2-pack.

Key Highlights

  • 70 cm length for flexible routing in tight spaces
  • 3-pin female to female connectors for direct header bridging
  • 26 AWG wire for reliable signal transmission
  • Compatible with standard 3-pin male headers
  • Pack of two cables for spares or multiple connections
  • Lightweight at 15 g per cable

Ideal For

  • 3D printer owners maintaining or upgrading their machines
  • Electronics hobbyists building Arduino projects
  • Makers prototyping with breadboards and modules
  • Technicians repairing or modifying control boards
  • STEM educators demonstrating circuit connections

Buying Tip

Check that your devices have 3-pin male headers with a 2.54 mm pitch to ensure these female-to-female cables fit properly.

Elecvora expert review

Our verdict

These Dupont cables are a straightforward solution for 3-pin connections in 3D printers and electronics. They offer good length and a two-pack value, though users should verify header compatibility.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 70 cm length provides flexibility
  • 26 AWG wire suitable for low-power signals
  • Two cables included for convenience
  • Lightweight and easy to route

Cons

  • Only compatible with 3-pin headers
  • Female-to-female only, not for extending female headers

Best for

3D printer enthusiasts and electronics hobbyists needing reliable 3-pin jumper cables

Not ideal for

Projects requiring different pin counts or male connectors

Specifications

Wire Size (AWG)26
No. of Pins3
Compatible Pin Header3P-3P
DuPont Line3P
Header Pin Width (mm)7.5
Weight (g)15
Cable Length70
Shipping Weight0.018 kg
Shipping Dimensions4 × 3 × 2 cm

What's in the box

  • 2 x 70CM 3 Pin Female to Female Dupont Cable

Frequently Asked Questions

What is the length of each cable?
Each cable is 70 cm long.
How many cables are included?
The package includes two cables.
Can I use these cables with a breadboard?
Yes, if your breadboard has male headers or you use them with male-to-male adapters. These are female-to-female cables, so they connect to male pins.
What is the wire gauge?
The wire size is 26 AWG.
Are these cables compatible with Arduino?
Yes, they can be used with Arduino boards and shields that have 3-pin male headers.
How should I store these cables?
Keep them in a dry place, away from excessive heat or moisture, and avoid sharp bends to prolong their life.

Overview

The Generic 70CM 3 Pin Female to Female Dupont Cable is a practical jumper wire set designed for 3D printers and a wide range of electronics projects. Each cable measures 70 cm and features a 3-pin female connector on both ends, making it easy to link two compatible male headers. The 26 AWG wire construction ensures a balance of flexibility and durability, while the 3-pin configuration is commonly used for sensors, stepper motors, and control board connections. This pack includes two cables, providing a convenient spare or allowing you to complete multiple wiring tasks.

Key Features

  • 70 cm length: Offers ample reach for routing between components without excess slack.
  • 3-pin female connectors: Designed to mate with standard 3-pin male headers, ensuring a secure connection.
  • 26 AWG wire: A common gauge for low-power signals and control wiring in electronics.
  • Two-piece pack: Gives you a spare cable or the ability to make two separate connections.

Specifications Explained

Wire Size (AWG): 26 – This gauge is suitable for low-current signals, typical in 3D printer sensors and control lines. No. of Pins: 3 – Each connector has three pins, matching common 3-pin headers on 3D printer boards, Arduino shields, and modules. Compatible Pin Header: 3P-3P – The cable is intended to connect two 3-pin male headers directly. Header Pin Width: 7.5 mm – This refers to the width of the connector housing, ensuring compatibility with standard 0.1-inch (2.54 mm) pitch headers. Cable Length: 70 cm – Provides flexibility in positioning components. Weight: 15 g – Lightweight, so it won't strain connections.

Compatibility and Requirements

These cables are compatible with any device that uses standard 3-pin male headers with a 2.54 mm pitch. They are commonly used with 3D printer control boards, Arduino boards, and various electronic modules. No additional tools are required for use; simply plug the female connectors onto the male headers. Note that these are female-to-female cables, so they are intended to connect two male headers, not to extend a female header.

Typical Uses

Use these Dupont cables for wiring sensors, endstops, temperature sensors, or stepper motor extensions in 3D printers. They are also handy for prototyping on breadboards, connecting Arduino pins to modules, or making custom jumper connections in electronics projects. The 70 cm length is particularly useful when components are spaced apart, such as in larger 3D printer frames or when routing wires around obstructions.

What's in the Box

Package includes two 70CM 3 Pin Female to Female Dupont Cables.

Quick specs

Wire Size (AWG)
26
No. of Pins
3
Compatible Pin Header
3P-3P
DuPont Line
3P
Header Pin Width (mm)
7.5
Weight (g)
15
See all specifications