
1 / 2 · Click to enlarge
At a glance
This buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: rated voltage (vdc) 4.75 to 5.25; current rating (a) 8mA; shipping weight 0.001 kg. Check that your power source supplies 4.75 to 5.25 before connecting it.
Key Highlights
- Rated Voltage (VDC): 4.75 to 5.25
- Current Rating (A): 8mA
- Shipping Weight: 0.001 kg
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Rated Voltage (VDC) | 4.75 to 5.25 |
|---|---|
| Current Rating (A) | 8mA |
| Operating Temperature (°C) | 0 to 70 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The 74LS126 Quad 3-State Buffer IC (74126 IC) DIP-14 Package is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Rated Voltage (VDC): 4.75 to 5.25 (match this to your power supply; too high a voltage can damage the part)
- Current Rating (A): 8mA (your supply must deliver at least this much current)
- Operating Temperature (°C): 0 to 70
- Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This device contains four independent gates each of which performs a non-inverting buffer function. The outputs have the 3-STATE feature. When enabled, the outputs exhibit the low impedance characteristics of a standard LS output with additional drive capability to permit the driving of bus lines without external resistors. When disabled, both the output transistors are turned OFF presenting a high-impedance state to the bus line. Thus the output will act neither as a significant load nor as a driver. To minimize the possibility that two outputs will attempt to take a common bus to opposite logic levels, the disable time is shorter than the enable time of the outputs
Note:
- Product Images are shown for illustrative purposes only and may differ from the actual product.
- For Technical Specifications about the IC go through the Datasheet in the Attachment section.
Package Includes:
1 x 74LS126 Quad 3-State Buffer IC (74126 IC) DIP-14 PackageQuick specs
- Rated Voltage (VDC)
- 4.75 to 5.25
- Current Rating (A)
- 8mA
- Operating Temperature (°C)
- 0 to 70
- Shipping Weight
- 0.001 kg
- Shipping Dimensions
- 1 × 1 × 1 cm













