Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A fixed negative linear regulator in a TO-220-3 package that delivers a stable -5 V output from a negative supply rail. Internal thermal, short-circuit and safe-area protection make it a robust choice for split-rail and repair work.

Key Highlights

  • Fixed -5 V negative output from a single regulator
  • TO-220-3 through-hole package for easy PCB or heatsink mounting
  • 5 A maximum operating current with 66 dB ripple rejection
  • Internal thermal overload and short-circuit current limiting
  • Line regulation 50 mV and load regulation 100 mV
  • Operates from -7 V to -35 V supply with -20 to 120 °C range

Ideal For

  • Hobbyists building split-rail analogue and op-amp circuits
  • Repair technicians replacing a failed 79XX negative regulator
  • Students learning linear regulator wiring and heatsinking
  • Makers prototyping sensor and instrumentation front ends
  • Audio DIY builders needing a quiet -5 V rail

Buying Tip

Confirm your project needs a negative rail before ordering, and plan a heatsink if the voltage drop across the regulator multiplied by your load current will be significant.

Elecvora expert review

Our verdict

A dependable, well-understood negative regulator that does exactly one job with useful built-in protection. It is a sensible choice for split-rail and repair work where a clean -5 V rail matters more than efficiency.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Fixed -5 V output with no external components needed for basic operation
  • Thermal, short-circuit and safe-area protection built in
  • TO-220-3 package is easy to mount and heatsink
  • Good ripple rejection and tight line and load regulation figures

Cons

  • Negative polarity means it cannot replace a positive 78XX part
  • Linear design wastes power as heat when the input-output difference is large
  • Heatsinking may be required at higher currents

Best for

Split-rail analogue, audio and repair projects needing a stable -5 V rail

Not ideal for

High-efficiency or battery-powered designs where switching regulators are preferred

Specifications

Case/PackageTO2203
Min Supply Voltage- 7
Max. Operating Current (A)5
Model No. / NameLinear Voltage Regulator
Model Series79XX
Operating Temperature (°C)-20 to 120
Dimensions (L x W x H) mm10.28 x 4.82 x 9.28
Mounting TypeThrough Hole
No. of Outputs1
PolarityNegative
Output Voltage- 5 V
Output TypeFixed
PSRR/Ripple Rejection66 dB
Load Regulation100 mV
Line Regulation50 mV
Max. Supply Voltage (V)35
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 79M05 TO-220-3 Linear Voltage Regulator

Frequently Asked Questions

Is this a positive or negative voltage regulator?
It is a negative regulator with a fixed -5 V output, part of the 79XX series. It is not interchangeable with positive 78XX regulators.
What input voltage does it need?
The supply must be negative and fall between -7 V and -35 V for the regulator to work within its ratings.
How much current can it deliver?
The maximum operating current rating is 5 A, but the practical figure depends on power dissipation and the heatsinking you provide.
Does it need external components?
No external components are required for basic operation, although input and output capacitors are common practice in real circuits.
What is included in the package?
The package contains one 79M05 TO-220-3 linear voltage regulator.
How should I handle heat?
Keep the operating temperature within -20 to 120 °C and mount the tab to a heatsink when the regulator will dissipate significant power.

Overview

The 79M05 is a member of the 79XX family of fixed negative linear voltage regulators, packaged in the widely used TO-220-3 case. It accepts a negative input rail and maintains a constant -5 V at the output, removing the ripple and load-dependent variation that would otherwise reach sensitive circuitry. Because it is a linear design, no switching noise is added to the rail, which is helpful in analogue and mixed-signal work.

Protection is built in rather than bolted on: thermal overload shutdown, short-circuit current limiting and output transistor safe-area compensation all come as part of the device. That makes the regulator reasonably tolerant of wiring mistakes and overloads during prototyping.

Key Features

  • Fixed -5 V negative output with a single output channel and no external components required for basic operation.
  • TO-220-3 through-hole package measuring approximately 10.28 x 4.82 x 9.28 mm, suitable for breadboards, stripboard and plated PCBs.
  • 5 A maximum operating current rating, with the tab available for heatsinking when running near that limit.
  • 66 dB ripple rejection to suppress supply-borne noise on the negative rail.
  • Line regulation of 50 mV and load regulation of 100 mV for predictable output under changing conditions.
  • Wide operating temperature range of -20 to 120 °C.

Specifications Explained

The -5 V fixed output is the headline figure: this is a negative regulator, so it is normally used with its own negative input rail rather than as a drop-in replacement for a positive 7805-type part. The input range of -7 V to -35 V sets the headroom you need; a more negative input than the minimum keeps the regulator in regulation, while staying inside the maximum protects it.

Current handling is rated at 5 A maximum operating current, but real-world dissipation depends on the voltage dropped across the device and the heatsinking provided. The TO-220-3 tab is there for exactly that reason. Ripple rejection of 66 dB indicates how strongly input noise is attenuated, while the 50 mV line and 100 mV load regulation figures describe how little the output moves when the input or the load changes.

Compatibility and Requirements

The regulator requires a negative DC input between -7 V and -35 V and provides one fixed -5 V output. It is a through-hole part, so it suits PCBs, stripboard and breadboard builds with TO-220 spacing. Because it is a negative regulator, it is not interchangeable with positive 78XX devices; check the polarity of your supply and load before wiring. External components are not required for basic operation, though the usual input and output capacitors are common practice in real circuits.

Typical Uses

Split-rail analogue circuits, op-amp and comparator supplies, audio preamp stages, instrumentation front ends, sensor signal conditioning, educational projects and repair or replacement work on equipment that already uses a 79XX negative rail.

What's in the Box

One 79M05 TO-220-3 linear voltage regulator.

Quick specs

Case/Package
TO2203
Min Supply Voltage
- 7
Max. Operating Current (A)
5
Model No. / Name
Linear Voltage Regulator
Model Series
79XX
Operating Temperature (°C)
-20 to 120
See all specifications