Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1400KV, 14-pole brushless outrunner with a pre-soldered connector and 3.17 mm shaft, built for small drones, quadcopters and RC planes. It runs on 2S-3S LiPO with up to 180 W of power, giving smooth throttle response at a low build cost.

Key Highlights

  • 1400KV rating for 2S to 3S LiPO battery setups
  • 14-pole outrunner with 3.17 mm shaft diameter
  • 16 A current capacity and 180 W maximum power
  • Pre-soldered connector for a direct ESC link
  • Compact 72 g metal can measuring 27 x 27.5 mm
  • Smooth throttle response across the 6-12 A efficiency range

Ideal For

  • Hobbyists building a first quadcopter on a budget
  • RC airplane builders needing a lightweight 1400KV outrunner
  • Multirotor and hexacopter frame projects using 2S-3S packs
  • UAV and small drone prototypes with compact motor mounts

Buying Tip

Confirm your ESC is rated for at least the motor's 16 A current draw and that your prop choice suits a 1400KV wind on 2S-3S before ordering.

Elecvora expert review

Our verdict

A sensible low-cost outrunner for small builds where weight and simplicity matter more than peak output. The pre-soldered connector and bi-directional operation remove two common assembly headaches.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight 72 g metal can
  • Pre-soldered connector speeds up wiring
  • Bi-directional rotation via polarity swap
  • Runs on widely used 2S-3S LiPO packs

Cons

  • ESC and propeller are not included
  • 16 A capacity limits heavier prop choices
  • No warranty or certification details provided

Best for

Budget quadcopter and RC airplane builds on 2S-3S

Not ideal for

High-power or heavy-lift multirotors needing more than 180 W

Specifications

Motor KV (RPM/V)1400 KV
Motor TypeBrushless Motor
Compatible LiPO Batteries2S to 3S
Model No. / NameA2212 10T
Shaft Diameter3.17 mm
Current Capacity (A)16
Max. Efficiency Current (A)6 ~ 12
No-Load Current (mA)700
Maximum Efficiency0.8
Length (mm)27.5
Weight (g)72
Width (mm)27
Internal Resistance(mOhm)65
Poles14
Max. Power (W)180
Shipping Weight0.078 kg
Shipping Dimensions12 × 6 × 5 cm

What's in the box

  • 1 x A2212 10T 1400KV brushless motor
  • 1 x prop adapter
  • 1 x X-type motor holder with screws

Frequently Asked Questions

What battery should I use with this motor?
It is designed for 2S to 3S LiPO batteries. Stay within that range to keep current draw near the rated 16 A capacity.
Can I reverse the motor direction?
Yes. The motor is bi-directional, so swapping the polarity of the input supply reverses the rotation direction.
What ESC and propeller work with it?
It is commonly paired with a SimonK 30A ESC and a 1045 propeller set. Both are sold separately.
What is included in the package?
You receive the motor, a prop adapter, and an X-type motor holder with screws. No ESC or propeller is included.
How much power can it handle?
Maximum power is 180 W with a 16 A current capacity. Maximum efficiency current is between 6 A and 12 A.
How do I look after the motor?
Keep the can clean and check the shaft and mount screws periodically. Avoid running it far beyond its rated current to limit heat build-up.

Overview

The A2212 10T is a brushless outrunner motor rated at 1400KV, intended for drones, quadcopters, multirotors, RC airplanes and UAV projects. It pairs a compact metal can with a 14-pole stator and a 3.17 mm shaft, keeping the unit at roughly 72 g so it does not weigh down small airframes. The motor leads arrive with a pre-soldered connector, which simplifies the link to a compatible ESC during assembly.

Key Features

  • 1400KV brushless outrunner with 14 poles
  • Runs on 2S to 3S LiPO batteries
  • 16 A current capacity and 180 W maximum power
  • 3.17 mm shaft diameter for common prop adapters
  • Pre-soldered connector for faster wiring
  • Solid metal case for everyday durability

Specifications Explained

KV rating: 1400KV means the motor turns faster per volt than lower-KV alternatives, so it favours smaller, lighter props and quicker response rather than large slow-turning setups.

Power and current: The 180 W maximum power and 16 A current capacity define the ceiling for your build. Maximum efficiency current is listed at 6 A to 12 A, so the motor is happiest in that band; pushing toward the limit leaves less headroom.

Efficiency and resistance: A maximum efficiency figure of 0.8 and 65 mOhm internal resistance describe how much of the input is converted into useful rotation. Lower resistance means less heat for a given current.

Size and weight: At 27 mm wide and 27.5 mm long, with a 72 g weight, the motor fits compact frames. The 3.17 mm shaft matches many standard prop adapters.

Compatibility and Requirements

The motor is designed for 2S to 3S LiPO packs. It is commonly paired with a SimonK 30A ESC and a 1045 propeller set. Because the unit is bi-directional, you can reverse rotation by swapping the polarity of the input supply, so no special reverse motor is needed for counter-rotating positions. An ESC and propeller are not included and must be sourced separately.

Typical Uses

Quadcopters, hexacopter frames, multirotors, RC airplanes and UAV builds that call for a lightweight 1400KV outrunner. It also suits hobbyists assembling a first drone who want an affordable motor with predictable throttle behaviour.

What's in the Box

  • 1 x A2212 10T 1400KV brushless motor
  • 1 x prop adapter
  • 1 x X-type motor holder with screws

Quick specs

Motor KV (RPM/V)
1400 KV
Motor Type
Brushless Motor
Compatible LiPO Batteries
2S to 3S
Model No. / Name
A2212 10T
Shaft Diameter
3.17 mm
Current Capacity (A)
16
See all specifications