
1 / 5 · Click to enlarge
AI Summary
A compact 2200KV brushless outrunner motor for small multirotor builds, supplied with a soldered connector and a 3.17 mm shaft. It runs on 2S to 3S LiPO packs and can spin either direction by swapping input polarity.
Key Highlights
- 2200 KV rating for lively response on lightweight frames
- Runs on 2S to 3S LiPO battery packs
- 3.17 mm shaft fits common prop adapters
- 12 A current capacity with 4 to 10 A efficiency band
- Rotation direction changes by swapping input polarity
- Soldered connector fitted for quicker wiring
Ideal For
- Builders of lightweight quadcopter frames
- Hobbyists assembling small hexacopter projects
- RC makers needing a compact 2200 KV outrunner
- Learners starting a first brushless multirotor build
Buying Tip
Check that your ESC is rated above the motor's 12 A current capacity and that your battery is a 2S or 3S LiPO before ordering.
Elecvora expert review
Our verdict
A straightforward, low-cost brushless motor for small multirotor builds where a 2200 KV outrunner and a 3.17 mm shaft are the right fit. It is simple to wire thanks to the soldered connector and the polarity-based direction change.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Soldered connector simplifies wiring
- Bi-directional rotation by swapping polarity
- Compact size and about 60 g weight
- Clear 4 to 10 A efficiency band
Cons
- Limited to 2S and 3S LiPO packs
- Requires a separately sourced ESC and propeller
- No warranty or certification details provided
Best for
Lightweight multirotor and RC hobby builds on a budget
Not ideal for
Large frames or high-current setups beyond the 12 A rating
Specifications
| Motor KV (RPM/V) | 2200 KV |
|---|---|
| Motor Type | Brushless Motor |
| Compatible LiPO Batteries | 2S to 3S |
| Model No. / Name | A2212 |
| Shaft Diameter | 3.17 mm |
| Maximum Efficiency | 0.8 |
| Current Capacity (A) | 12 |
| No-Load Current (mA) | 500 |
| Max. Efficiency Current (A) | 4 ~ 10 |
| Length (mm) | 27 |
| Width (mm) | 26 |
| Weight (g) | 60 |
| Shipping Weight | 0.064 kg |
| Shipping Dimensions | 10 × 6 × 5 cm |
What's in the box
- 1 x A2212 6T 2200KV brushless motor
- 1 x prop adapter
- 1 x X-type motor holder with screws
Frequently Asked Questions
What battery should I use with this motor?
How do I change the motor's rotation direction?
What is the shaft diameter?
What comes in the box?
What current can the motor handle?
How much does the motor weigh?
Overview
The A2212 6T 2200KV is a brushless outrunner motor made for small multirotor builds and general RC projects. Its 2200 KV rating means it turns faster per volt than lower-KV motors, which suits light frames and modest prop sizes. The unit measures roughly 27 mm long and 26 mm wide and weighs about 60 g, so it adds little bulk to a compact airframe. A soldered connector is already fitted, which shortens wiring time during assembly.
Key Features
- 2200 KV brushless outrunner design
- Compatible with 2S to 3S LiPO packs
- 3.17 mm shaft diameter for standard prop adapters
- 12 A current capacity with a 4 to 10 A maximum efficiency current range
- Bi-directional rotation by swapping input polarity
- Compact 27 x 26 mm body at about 60 g
Specifications Explained
KV rating: 2200 KV describes revolutions per volt, so higher voltage input means higher RPM. Keep this in mind when choosing between 2S and 3S packs.
Current: The motor is rated to 12 A, and its most efficient working band is 4 to 10 A. Staying inside that band keeps heat and wasted energy in check.
No-load current: At 500 mA, this figure shows the draw with no propeller fitted and helps you sanity-check the motor during bench testing.
Shaft: The 3.17 mm shaft matches many commonly available prop adapters, and the supplied adapter is sized for this motor.
Compatibility and Requirements
Use the motor with 2S or 3S LiPO batteries only. An appropriate ESC rated for the motor's current draw is required, along with a propeller suited to your frame and voltage. Because the motor is bi-directional, you can set CW or CCW rotation by reversing the polarity of the input supply, which simplifies wiring mirrored motor positions.
Typical Uses
This motor fits lightweight quadcopter and hexacopter frames, small sport builds and learner projects where a compact, affordable outrunner is enough. It is also a practical choice for RC hobby builds that need a small brushless motor with a standard shaft size.
What's in the Box
- 1 x A2212 6T 2200KV brushless motor
- 1 x prop adapter
- 1 x X-type motor holder with screws
Quick specs
- Motor KV (RPM/V)
- 2200 KV
- Motor Type
- Brushless Motor
- Compatible LiPO Batteries
- 2S to 3S
- Model No. / Name
- A2212
- Shaft Diameter
- 3.17 mm
- Maximum Efficiency
- 0.8
Frequently Bought Together

A2212 1000 KV BLDC Brushless DC Motor for Drone (Soldered Connector)
$9.99
SimonK 30A BLDC ESC Electronic Speed Controller with Connectors
$8.99
Emax BLHeli Series 30A ESC with Oneshot (Original)
$25.99
Emax SimonK Series Multirotor 30A Brushless ESC (Original)
$24.99
Pro-Range Propellers 1045(10X4.5) Glass Fiber Nylon Black 1CW+1CCW-1pair
$7.99












