Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This current and voltage sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: reverse voltage(v) -0.1; frequency bandwidth (khz) 80; rise time 5μs. Check that your power source supplies -0.1 before connecting it.

Key Highlights

  • Reverse voltage(V): -0.1
  • Frequency Bandwidth (KHz): 80
  • Rise Time: 5μs

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Reverse voltage(V)-0.1
Supply Current10 A
Frequency Bandwidth (KHz)80
Rise Time5μs
Output Capacitance Load (nF)10
Sensitivity (mV/A)100
Operating Temperature (°C)–40 ~ +85
Length (mm)5
Width (mm)6
Weight (g)1 (approx)

Overview

The ACS712 20A Current Sensor Module for Arduino is listed in our current and voltage sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Reverse voltage(V): -0.1 (match this to your power supply; too high a voltage can damage the part)
  • Supply Current: 10 A (your supply must deliver at least this much current)
  • Frequency Bandwidth (KHz): 80 (make sure the rest of your system works at this frequency)
  • Rise Time: 5μs
  • Output Capacitance Load (nF): 10
  • Sensitivity (mV/A): 100
  • Operating Temperature (°C): –40 ~ +85
  • Length (mm): 5 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The ACS712 20A Current Sensor IC (ACS712ELCTR-20A-T) provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. The device consists of a precise, low-offset, linear Hall sensor circuit with a copper conduction path located near the surface of the die.

Applied current flowing through this copper conduction path generates a magnetic field that is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer.

A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy after packaging.


Features:

  1. The low-noise analog signal path.
  2. Device bandwidth is set via the new FILTER pin.
  3. 5 μs output rise time in response to step input current.
  4. 80 kHz bandwidth.
  5. Total output error 1.5% at TA = 25°C.
  6. Small footprint, low-profile SOIC8 package.
  7. 1.2 mΩ internal conductor resistance.
  8. 2.1 kV RMS minimum isolation voltage from pins 1-4 to pins 5-8.
  9. 5.0 V, single-supply operation.
  10. 66 to 185 mV/A output sensitivity.
  11. Output voltage proportional to AC or DC currents.
  12. Factory-trimmed for accuracy.
  13. Extremely stable output offset voltage.
  14. Nearly zero magnetic hystereses.
  15. Ratiometric output from a supply voltage.

Package Includes:

1 x ACS712 20A Current Sensor IC (ACS712ELCTR-20A-T).

Quick specs

Reverse voltage(V)
-0.1
Supply Current
10 A
Frequency Bandwidth (KHz)
80
Rise Time
5μs
Output Capacitance Load (nF)
10
Sensitivity (mV/A)
100
See all specifications