
1 / 5 · Click to enlarge
At a glance
Made by Adafruit, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type ESP8266 Based; length (mm) 51; width (mm) 23.
Key Highlights
- Item Type: ESP8266 Based
- Length (mm): 51
- Width (mm): 23
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | ESP8266 Based |
|---|---|
| Length (mm) | 51 |
| Width (mm) | 23 |
| Weight (g) | 10 |
| WiFi (Y/N) | 802.11 b/g/n |
| Mounting Hole PCD (mm) | 4 |
| Operating Frequency (MHz) | 80 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 4 × 1 cm |
Overview
The Adafruit Assembled Adafruit Feather HUZZAH with ESP8266 With Headers, made by Adafruit, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: ESP8266 Based
- Length (mm): 51 (measure your mounting space before ordering)
- Width (mm): 23 (measure your mounting space before ordering)
- Weight (g): 10 (important for drones, RC models and anything you carry)
- WiFi (Y/N): 802.11 b/g/n (2.4 GHz reaches further, 5 GHz is faster at short range)
- Mounting Hole PCD (mm): 4
- Operating Frequency (MHz): 80 (make sure the rest of your system works at this frequency)
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- ESP8266 v1.1 @ 80MHz with 3.3V logic/power
- 4MB of FLASH (32 MBit)
- 3.3V regulator with 500mA peak current output
- CP2104 USB-Serial converter onboard with 921600 max baudrate for uploading
- Auto-reset support for getting into bootload mode before firmware upload
- 9 x GPIO pins - can also be used as I2C and SPI
- 1 x analog inputs 1.0V max
- Built-in 100mA LiPoly charger with charging status indicator LED, can also cut a trace to disable the charger
- Pin #0 red LED for general purpose blinking. Pin #2 blue LED for boot loading debug & general purpose blinking
- Power/enable pin
- Reset button
Package Includes: 1 x Adafruit Assembled Adafruit Feather HUZZAH with ESP8266 With Headers
Quick specs
- Item Type
- ESP8266 Based
- Length (mm)
- 51
- Width (mm)
- 23
- Weight (g)
- 10
- WiFi (Y/N)
- 802.11 b/g/n
- Mounting Hole PCD (mm)
- 4



















