Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A featherweight ATmega328P board running at 8MHz and 3.3V, with built-in LiPo charging and USB programming via CP2104. Its tiny prototyping area and 4.8g weight make it ideal for portable Arduino-compatible projects.

Key Highlights

  • ATmega328P at 8MHz with 3.3V logic for classic Arduino compatibility
  • Built-in 100mA LiPo charger with status LED and battery connector
  • CP2104 USB-to-serial for programming and debugging
  • 19 GPIO pins plus 2 analog-only inputs and 6 PWM outputs
  • Hardware I2C and SPI support; UART via SoftwareSerial
  • Weighs only 4.8g with a small on-board prototyping area

Ideal For

  • Makers building lightweight wearable electronics
  • Students learning Arduino programming with a compact board
  • Engineers prototyping portable sensor nodes
  • Hobbyists creating battery-powered data loggers
  • Anyone needing a small Arduino-compatible board with built-in LiPo charging

Buying Tip

Remember to order a micro USB cable and a 3.7V LiPo battery separately if you plan to use the board untethered, as neither is included.

Elecvora expert review

Our verdict

The Feather 328P is a well-executed blend of the classic ATmega328P and modern Feather conveniences. It is an excellent choice for portable projects that need Arduino compatibility and built-in battery charging.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight and compact at 4.8g and 51mm long
  • Built-in LiPo charger simplifies battery-powered designs
  • CP2104 USB serial is reliable and widely supported
  • Prototyping area saves space and wiring
  • Arduino-compatible with extensive community support

Cons

  • 8MHz clock is slower than 16MHz boards
  • Only 2K RAM may limit complex sketches
  • Micro USB cable and battery not included

Best for

Portable and wearable Arduino projects needing a small, light board with battery charging.

Not ideal for

Projects requiring high processing speed or large memory.

Specifications

Item TypeDevelopment Board
Model No. / NameATmega Series
MicrocontrollerATmega328P
ProcessorATmega328p @ 8MHz
Logic/Power3.3V
Peak Current (A)500mA
USB Serial ConnectorCP2104
Length (mm)51
Width (mm)23
Weight (g)4.8
Shipping Weight0.02 kg
Shipping Dimensions5 × 3 × 1 cm

What's in the box

  • 1 x Adafruit Feather 328P ATmega328P 3.3V 8MHz Development Board with LiPo Battery Charging

Frequently Asked Questions

Is this board compatible with the Arduino IDE?
Yes, it is Arduino-compatible. You will need to install the Adafruit AVR board package and select the Feather 328P as your board.
Can I power it from a battery?
Yes, it has a built-in 100mA LiPo charger and a connector for 3.7V lithium polymer batteries. It automatically switches to USB power when connected.
What is included in the box?
The package includes one Adafruit Feather 328P board. A micro USB cable and battery are not included.
How do I monitor battery voltage?
The battery is connected through a voltage divider to an analog pin, so you can read the voltage in your code to estimate charge level.
What are the pin voltage levels?
The board operates at 3.3V logic. Do not apply 5V to the GPIO pins, as this could damage the microcontroller.
Does it support hardware serial?
The ATmega328P has a hardware UART, but on this board it is used for USB communication. For external UART devices, use SoftwareSerial.

Overview

The Adafruit Feather 328P brings the familiar ATmega328P microcontroller into a thin, lightweight board designed for portable electronics. Running at 8MHz with 3.3V logic, it offers the same chip setup found in many classic Arduino-compatible designs, so existing code and libraries often work with minimal changes. A CP2104 USB-to-serial bridge handles programming and serial debugging over micro USB.

What sets this Feather apart is its built-in 100mA LiPo charger and battery connector. You can power the board from USB alone or attach a 3.7V lithium polymer battery for untethered use; the board automatically switches to USB power when connected. A voltage divider ties the battery to an analog pin, letting you monitor charge level in your code.

Key Features

  • ATmega328P at 8MHz, 3.3V logic with 32K flash and 2K RAM for Arduino-compatible sketches.
  • CP2104 USB serial converter for programming and serial port debugging.
  • 100mA LiPo charger with charging status indicator LED and battery connector.
  • 19 GPIO pins plus 2 analog-in-only pins, 6 PWM outputs, and 8 analog inputs (two shared with I2C).
  • Hardware I2C and hardware SPI support; UART devices should use SoftwareSerial.
  • Small prototyping area for soldering a button or sensor directly.
  • Pin 13 red LED for general-purpose blinking, plus RX and TX LEDs for serial data.
  • Power/enable pin, reset button, and 4 mounting holes for integration.

Specifications Explained

The 8MHz clock and 3.3V logic mean the board runs at a lower speed and voltage than 5V 16MHz Arduino boards, which reduces power consumption and makes it suitable for battery-powered designs. The 500mA peak current output from the 3.3V regulator can supply small sensors and peripherals, though high-current devices may need external power. The CP2104 provides a reliable USB connection for uploading sketches and viewing serial output. With 19 GPIO pins and 8 analog inputs, there is enough I/O for most compact projects, and hardware I2C and SPI simplify connecting displays, sensors, and memory cards.

Compatibility and Requirements

The Feather 328P is Arduino-compatible and works with the Arduino IDE. You will need a micro USB cable (not included) for programming and power. A 3.7V lithium polymer battery is optional; the board runs fine from USB alone. The battery connector matches Adafruit's 3.7V LiPo batteries. No other accessories are required to get started.

Typical Uses

This board suits wearable electronics, portable sensor nodes, small robotics, and remote data loggers where weight and size are critical. The prototyping area is handy for quick builds with a button, LED, or simple sensor. It is also a good choice for anyone transitioning from a Pro Mini or similar board who wants built-in USB and battery charging.

What's in the Box

  • 1 x Adafruit Feather 328P ATmega328P 3.3V 8MHz Development Board with LiPo Battery Charging

Quick specs

Item Type
Development Board
Model No. / Name
ATmega Series
Microcontroller
ATmega328P
Processor
ATmega328p @ 8MHz
Logic/Power
3.3V
Peak Current (A)
500mA
See all specifications