
1 / 4 · Click to enlarge
At a glance
Made by Adafruit, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type ESP32 Based; flash memory 1MB; clock frequency 64. Check that your power source supplies 3.3 before connecting it.
Key Highlights
- Item Type: ESP32 Based
- Flash Memory: 1MB
- Clock Frequency: 64
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | ESP32 Based |
|---|---|
| Flash Memory | 1MB |
| Clock Frequency | 64 |
| Product Type | Development board |
| Model No. / Name | nRF52840 ARM Cortex |
| Operating Voltage (VDC) | 3.3 |
| Clock Speed | 64MHz |
| Program Memory (KB) | 256 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 10 × 11 × 1 cm |
Overview
The Adafruit Feather nRF52840 Express, made by Adafruit, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: ESP32 Based
- Flash Memory: 1MB (more memory leaves room for larger programs and buffers)
- Clock Frequency: 64 (make sure the rest of your system works at this frequency)
- Product Type: Development board
- Model No. / Name: nRF52840 ARM Cortex
- Operating Voltage (VDC): 3.3 (match this to your power supply; too high a voltage can damage the part)
- Clock Speed: 64MHz (make sure the rest of your system works at this frequency)
- Program Memory (KB): 256 (more memory leaves room for larger programs and buffers)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
FEATURES:
- ARM Cortex M4F (with HW floating point acceleration) running at 64MH
- 1MB flash and 256KB SRAM
- Native Open Source USB stack - pre-programmed with UF2 bootloader
- Bluetooth Low Energy compatible 2.4GHz radio (Details available in the nRF52840 product specification)
- FCC / IC / TELEC certified module
- Up to +8dBm output power
- 1.7v to 3.3v operation with internal linear and DC/DC voltage regulators
- 21 GPIO, 6 x 12-bit ADC pins, up to 12 PWM outputs (3 PWM modules with 4 outputs each)
- Pin #3 red LED for general purpose blinking, NeoPixel for colourful feedback
- Power/enable pin
- Measures 2.0x0.9x0.28" (51x23x7.2mm) without headers soldered in
- 6 grams
- 4 mounting holes
- Reset button
- SWD connector for debugging
- Works out of the box with all Adafruit FeatherWings (Even the UART-using ones like the GPS FeatherWing)
Package Includes:
1 x Adafruit Feather nRF52840 ExpressQuick specs
- Item Type
- ESP32 Based
- Flash Memory
- 1MB
- Clock Frequency
- 64
- Product Type
- Development board
- Model No. / Name
- nRF52840 ARM Cortex
- Operating Voltage (VDC)
- 3.3



















