Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this advance development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Breakout Board; model no. / name KB2040; microcontroller RP2040 32-bit Cortex M0+ dual-core.

Key Highlights

  • Item Type: Breakout Board
  • Model No. / Name: KB2040
  • Microcontroller: RP2040 32-bit Cortex M0+ dual-core

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeBreakout Board
Model No. / NameKB2040
MicrocontrollerRP2040 32-bit Cortex M0+ dual-core
Storage Capacity8 MB SPI FLASH
ConnectivityUSB Type-C, STEMMA QT
Peak Current (mA)500
Shipping Weight0.021 kg
Shipping Dimensions6 × 5 × 2 cm

Overview

The Adafruit KB2040 - RP2040 Kee Boar Driver, made by Adafruit, is listed in our advance development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Breakout Board
  • Model No. / Name: KB2040
  • Microcontroller: RP2040 32-bit Cortex M0+ dual-core (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Storage Capacity: 8 MB SPI FLASH (space for firmware, files or media)
  • Connectivity: USB Type-C, STEMMA QT
  • Peak Current (mA): 500 (your supply must deliver at least this much current)
  • Shipping Weight: 0.021 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 6 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The KB2040 is an RP2040 Kee Boar Driver-board designed for keyboards, shaped like an Arduino Pro Micro. It combines features from SparkFun's Pro Micro RP2040 and Elite-C, including a Qwiic I2C port, castellated pads, 8MB QSPI flash, and a jumper for high-power RGB LEDs. With 20 GPIO pins, Kee Boar Driver supports up to 100-key matrices or 65% 5x15 layouts. The plug-and-play QT cable simplifies connections without desoldering. It's perfect for creating custom keyboards with CircuitPython.

Features:

  1. Size and Form Factor: Same as a Pro Micro breakout, measuring 1.3" x 0.7" without headers.
  2. Microcontroller: RP2040 32-bit Cortex M0+ dual-core running at ~125 MHz with 264 KB RAM and no EEPROM.
  3. Storage: 8 MB SPI FLASH for file and CircuitPython/MicroPython code storage.
  4. GPIO Pins: 20 pins total, with 18 on castellated pads and 2 on the STEMMA QT port for easy access.
  5. Analog & Digital I/O: Four 12-bit ADCs., 16 x PWM outputs., Two I2C, Two SPI, and two UART peripherals., 10 digital GPIO pins for maximum PIO compatibility.
  6. LED & Indicators: RGB NeoPixel for status and classic green power LED.
  7. Buttons: Reset and Bootloader select buttons for easy restarts; Bootloader button also acts as a GPIO input.
  8. STEMMA QT: Plug-and-play I2C connector compatible with SparkFun Qwiic devices, providing extra GPIO.\
  9. Power Management: 3.3V regulator with 500mA peak current output.
  10. RAW output for powering NeoPixels and other 5V devices with a jumper to bypass the 500mA fuse for up to 2A from USB.
  11. USB: USB Type-C for ROM bootloader access, serial port debugging, and extra D- and D+ breakouts for alternative USB connections.

Package Includes:

1 x Adafruit KB2040 - RP2040 Kee Boar Driver

Quick specs

Item Type
Breakout Board
Model No. / Name
KB2040
Microcontroller
RP2040 32-bit Cortex M0+ dual-core
Storage Capacity
8 MB SPI FLASH
Connectivity
USB Type-C, STEMMA QT
Peak Current (mA)
500
See all specifications