Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A slim Bluetooth Low Energy driver board built on the nRF52840, designed to run the Adafruit LED Glasses RGB LED matrix. It also packs an accelerometer, PDM microphone, NeoPixel and STEMMA QT port for compact stand-alone projects.

Key Highlights

  • Nordic nRF52840 ARM Cortex M4F processor at 64MHz with floating point
  • 1MB flash and 256KB SRAM for CircuitPython and application code
  • BLE 2.4GHz radio with up to +8dBm output power
  • Built-in LIS3DH accelerometer and PDM microphone
  • STEMMA QT connector for plug-and-play I2C sensors
  • JST PH battery port with optional LiPoly charger

Ideal For

  • Makers building wearable LED glasses and light-up accessories
  • CircuitPython developers wanting a slim BLE board
  • Sensor projects needing motion and microphone input
  • Prototypers using STEMMA QT I2C modules
  • Compact BLE device builders who do not need breakout pins

Buying Tip

Check that your project does not need exposed GPIO pins, since this board has no breakout headers and is meant for the LED Glasses matrix and STEMMA QT accessories.

Elecvora expert review

Our verdict

A focused, very slim nRF52840 board that makes the LED Glasses matrix easy to drive while doubling as a capable BLE sensor platform. It suits compact builds where exposed pins are not needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Slim design with no bulky breakout headers
  • Strong nRF52840 core with 1MB flash and 256KB SRAM
  • Onboard accelerometer, PDM microphone and NeoPixel
  • STEMMA QT and JST PH battery port simplify expansion

Cons

  • No breakout GPIO pins for wiring external circuits
  • LiPoly battery and charger are optional extras
  • Designed around the LED Glasses matrix rather than general pin access

Best for

Wearable LED and compact BLE sensor projects

Not ideal for

Builds that need exposed GPIO headers

Specifications

Bluetooth VersionBLE
ProcessorARM Cortex M4F
Clock Frequency64MHz
Flash Memory1MB
SRAM256KB
CompatibilityBLE Compatible 2.4GHz
Rated output power+8dBm output power
Shipping Weight0.004 kg
Shipping Dimensions14 × 8 × 2 cm

What's in the box

  • 1 x Adafruit LED Glasses Driver - nRF52840 Sensor Board

Frequently Asked Questions

What is this board designed for?
It is primarily a thin, Bluetooth-enabled driver board for the Adafruit LED Glasses RGB LED matrix, and it can also be used as a stand-alone nRF52840 development board.
Does it have breakout pins for external wiring?
No. The board has no breakout pins to keep it compact; for GPIO access Adafruit recommends an nRF52840 ItsyBitsy, nRF52840 Feather or Feather Sense.
How do I connect extra sensors?
Use the STEMMA QT connector for plug-and-play I2C devices, which avoids soldering for compatible accessories.
How is the board powered?
It has a JST PH 2-pin battery port with an optional LiPoly charger. The battery itself is not included.
What processor and memory does it use?
It uses an ARM Cortex M4F at 64MHz with 1MB flash, 256KB SRAM and 2MB external QSPI flash for CircuitPython file storage.
What is included in the package?
The package contains 1 x Adafruit LED Glasses Driver - nRF52840 Sensor Board.

Overview

The Adafruit LED Glasses Driver is a thin, Bluetooth-enabled control board made to drive the Adafruit LED Glasses RGB LED matrix. Its slim shape and lack of breakout pin headers keep it easy to fit into wearable and light-up builds, while the onboard nRF52840 module gives it enough processing power to work as a small stand-alone development board too.

At its heart is an ARM Cortex M4F running at 64MHz with hardware floating point acceleration, paired with 1MB of flash and 256KB of SRAM. A 2MB external QSPI flash is included for CircuitPython file storage, so you can keep code and assets on the board itself.

Key Features

  • Nordic nRF52840 module with BLE-compatible 2.4GHz radio and up to +8dBm output power
  • ARM Cortex M4F at 64MHz with 1MB flash and 256KB SRAM
  • 2MB external QSPI flash for CircuitPython file storage
  • LIS3DH accelerometer and PDM microphone onboard
  • Red LED for general purpose blinking plus a tiny NeoPixel for colourful feedback
  • STEMMA QT connector for plug-and-play I2C devices
  • JST PH 2-pin battery port with optional LiPoly charger

Specifications Explained

The Cortex M4F core at 64MHz with floating point acceleration handles sensor maths and LED animation smoothly. 1MB flash and 256KB SRAM give room for firmware and buffers, while the separate 2MB QSPI flash is useful for storing CircuitPython files and assets.

The BLE-compatible 2.4GHz radio reaches up to +8dBm output power, which helps with reliable short-range wireless links. The LIS3DH accelerometer adds motion sensing, and the PDM microphone lets the board respond to sound. The STEMMA QT port removes soldering from I2C expansion, and the JST PH battery port with optional LiPoly charger supports untethered use.

Compatibility and Requirements

The board is designed for the Adafruit LED Glasses RGB LED matrix and uses a BLE-compatible 2.4GHz radio. I2C accessories connect through the STEMMA QT connector. Because there are no breakout GPIO pins, projects that need exposed pins are better served by an nRF52840 ItsyBitsy, nRF52840 Feather or Feather Sense. A LiPoly battery is optional and sold separately.

Typical Uses

  • Driving the Adafruit LED Glasses RGB LED matrix
  • Wearable light-up accessories and costume electronics
  • Compact BLE sensor nodes with motion and sound sensing
  • Small CircuitPython development projects
  • Quick I2C prototyping with STEMMA QT devices

What's in the Box

1 x Adafruit LED Glasses Driver - nRF52840 Sensor Board.

Quick specs

Bluetooth Version
BLE
Processor
ARM Cortex M4F
Clock Frequency
64MHz
Flash Memory
1MB
SRAM
256KB
Compatibility
BLE Compatible 2.4GHz
See all specifications