Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A water resistant pressure sensor breakout with 24-bit pressure and 16-bit temperature data, gel-protected sensing and STEMMA QT I2C connectors. It handles 260 to 1260 hPa and runs on 3 to 5 VDC for use with common microcontrollers.

Key Highlights

  • Water resistant gel-protected sensing element in a ceramic package
  • Measures 260 to 1260 hPa with 24-bit pressure data resolution
  • 16-bit temperature data with onboard temperature compensation
  • Wide 3 to 5 VDC input works with 3.3V and 5V logic boards
  • I2C and SPI support for flexible wiring
  • STEMMA QT connectors allow solder-free I2C hookup

Ideal For

  • Makers building weather or altitude sensing projects
  • Students learning I2C and SPI sensor integration
  • Engineers prototyping pressure monitoring in damp environments
  • Raspberry Pi and Arduino hobbyists adding environmental data
  • Developers needing combined pressure and temperature readings

Buying Tip

Confirm whether you need the ported version with an O-ring lip or the unported sister model, since the port is not a strong mechanical connection and should not take side-shear force.

Elecvora expert review

Our verdict

A well-rounded breakout for anyone who needs pressure and temperature data in wet or chemically exposed conditions. The gel protection, wide voltage range and STEMMA QT connectors make it easy to integrate without soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Water resistant gel-protected sensing element
  • Works with 3.3V and 5V logic
  • I2C and SPI interface options
  • STEMMA QT solder-free connectors
  • High resolution pressure and temperature data

Cons

  • Port is not a strong mechanical connection and can be damaged by side-shear force
  • SPI support is limited to Arduino only for now
  • Package contents are not specified

Best for

Makers and engineers measuring pressure in damp or chemically challenging environments

Not ideal for

Applications requiring a rugged mechanical pressure port under heavy physical stress

Specifications

Model No. / NamePressure Sensor
Operating Voltage (VDC)3 to 5
SupportedI2C or SP
Length (mm)2.5
Width (mm)2
Weight (g)1g
Additional Specs.I2C Logic pins: SCK - this is the I2C clock pin, connect to your microcontrollers I2C clock line SDI - this is the I2C data pin, connect to your microcontrollers I2C data line.
Shipping Weight0.004 kg
Shipping Dimensions9 × 5 × 1 cm

Frequently Asked Questions

What voltage does the LPS33HW breakout need?
It operates from 3 to 5 VDC, so it can be used with both 3.3V and 5V logic boards.
Which interfaces does the sensor support?
It supports I2C or SPI. In I2C mode, SCK is the clock pin and SDI is the data pin.
What pressure range can it measure?
It measures from 260 to 1260 hPa and can withstand pressure up to 20 times its measurement range.
Do I need to solder to connect it?
No, the STEMMA QT connectors for the I2C bus allow a solder-free connection with a compatible cable.
Is the sensor protected from water?
Yes, the sensing element is encased in a waterproof gel inside a ceramic package to prevent water intrusion from interfering with readings.
Can I use it with Raspberry Pi and Arduino?
Yes, drivers are available for CircuitPython, Arduino and Raspberry Pi, and the board supports both 3.3V and 5V logic.

Overview

The Adafruit LPS33HW is a compact breakout board built around a water resistant pressure sensor. The sensing element sits inside a ceramic package and is covered by a waterproof gel that keeps water which enters the sensor from disturbing readings. This makes it a practical choice when pressure needs to be measured in damp or chemically exposed settings rather than a clean, dry enclosure.

The board is small and light, measuring roughly 2.5 mm by 2 mm at the sensor itself with a total weight of about 1 g, and it ships with support circuitry so you can connect it directly to a microcontroller.

Key Features

  • Water resistant sensing: gel protection inside a ceramic package helps the sensor tolerate wet surroundings.
  • High resolution data: 24-bit pressure data and 16-bit temperature data.
  • Wide measurement range: reads from 260 to 1260 hPa for both absolute and relative pressure.
  • Temperature compensation: onboard compensation keeps readings stable as temperature changes.
  • Adjustable output: configurable data rate plus a low pass filter to reduce signal noise.
  • Solder-free option: STEMMA QT connectors for the I2C bus let you plug in with a compatible cable.

Specifications Explained

Operating voltage of 3 to 5 VDC means the breakout can be powered from either 3.3V boards such as Feather or Raspberry Pi, or 5V boards such as Arduino and Metro328, with the onboard circuitry handling the logic level.

I2C or SPI support gives you two bus options. In I2C mode, the SCK pin is the clock line and the SDI pin is the data line, each connecting to the matching pin on your microcontroller. I2C needs only two signal wires plus power and ground.

260 to 1260 hPa range covers normal atmospheric pressure conditions, and the sensor is rated to withstand pressure up to 20 times its measurement range. The 24-bit pressure data supports accuracy of about +/- 0.1% hPa, while the 16-bit temperature data records the ambient temperature alongside each reading.

Compatibility and Requirements

The board works with 3.3V and 5V logic systems and connects over I2C or SPI. Drivers are available for CircuitPython, Arduino and Raspberry Pi, and the STEMMA QT connectors are compatible with SparkFun Qwiic style cables for I2C. You will need a microcontroller board, a suitable cable or jumper wires, and a power source to begin measuring.

Typical Uses

  • Monitoring pressure in damp or splash-exposed enclosures
  • Weather and altitude experiments with relative and absolute readings
  • Educational projects exploring I2C and SPI sensors
  • Environmental data logging with temperature and pressure together
  • Prototyping pressure sensing in chemically challenging settings

What's in the Box

Package contents are not specified for this listing. Check the product packaging for the breakout board and any included accessories before use.

Quick specs

Model No. / Name
Pressure Sensor
Operating Voltage (VDC)
3 to 5
Supported
I2C or SP
Length (mm)
2.5
Width (mm)
2
Weight (g)
1g
See all specifications