
1 / 4 · Click to enlarge
At a glance
Made by Adafruit, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Accessory; model no. / name Key Switch; compatibility Trinket M0 heart, NeoPixel glow, Cherry MX.
Key Highlights
- Item Type: Accessory
- Model No. / Name: Key Switch
- Compatibility: Trinket M0 heart, NeoPixel glow, Cherry MX
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Accessory |
|---|---|
| Model No. / Name | Key Switch |
| Compatibility | Trinket M0 heart, NeoPixel glow, Cherry MX |
| Microcontroller | ATSAMD21E18 32-bit Cortex M0+ processor |
| Length (mm) | 32 |
| Width (mm) | 16.4 |
| Weight (g) | 2.1 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 4 × 4 × 2 cm |
Overview
The Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key Switch, made by Adafruit, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Accessory
- Model No. / Name: Key Switch
- Compatibility: Trinket M0 heart, NeoPixel glow, Cherry MX
- Microcontroller: ATSAMD21E18 32-bit Cortex M0+ processor (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Length (mm): 32 (measure your mounting space before ordering)
- Width (mm): 16.4 (measure your mounting space before ordering)
- Weight (g): 2.1 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- TSAMD21E18 Processor: 32-bit Cortex M0+ at 48 MHz with 256KB Flash and 32KB RAM.
- Native USB Support: Compatible with all OS, usable as USB serial console, MIDI, HID (Keyboard/Mouse), or a disk drive for Python scripts.
- Arduino & CircuitPython Compatible: Can be programmed with Arduino IDE or CircuitPython.
- RGB NeoPixel LED: Single reverse-mount RGB LED for customizable lighting.
- Capacitive Touch Pad: One touch-sensitive input for interactive projects.
- Cherry-MX Compatible Footprint: Supports nearly any mechanical switch (center-nub hole, side-nubs must be clipped).
- Reset Switch: Allows restarting project code or entering bootloader mode.
- Compact & Keychain-Friendly: Small and portable design for easy carrying.
Features:
1 x Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key SwitchQuick specs
- Item Type
- Accessory
- Model No. / Name
- Key Switch
- Compatibility
- Trinket M0 heart, NeoPixel glow, Cherry MX
- Microcontroller
- ATSAMD21E18 32-bit Cortex M0+ processor
- Length (mm)
- 32
- Width (mm)
- 16.4



















