
1 / 3 · Click to enlarge
At a glance
Made by Adafruit, this raspberry pi compatible accessories is a good fit for everyday home and hobby use. Main specs: item type Accessory; model no. / name Doubler; power supply voltage (v) 3.3. Check that your power source supplies 3.3 before connecting it.
Key Highlights
- Item Type: Accessory
- Model No. / Name: Doubler
- Power Supply Voltage (V): 3.3
Ideal For
- Everyday use
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Accessory |
|---|---|
| Model No. / Name | Doubler |
| Power Supply Voltage (V) | 3.3 |
| Battery Connector Type | JST PH |
| Length (mm) | 67.3 |
| Width (mm) | 52 |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 7 × 6 × 2 cm |
Overview
The Adafruit Proto Doubler PiCowbell for Pico and PicoW, made by Adafruit, is listed in our raspberry pi compatible accessories range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Accessory
- Model No. / Name: Doubler
- Power Supply Voltage (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
- Battery Connector Type: JST PH (note the battery type so you can order spares or the right charger)
- Length (mm): 67.3 (measure your mounting space before ordering)
- Width (mm): 52 (measure your mounting space before ordering)
- Shipping Weight: 0.018 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 7 × 6 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Two 2x20 slim socket headers for easy Pico and accessory connections with an extra row of sockets for each pin.
- JST PH connector for LiIon/LiPoly or Alkaline/NiMH battery use (disable charge jumper for non-rechargeable batteries).
- LiPoly/ LiIon charging circuitry for 3.7V/4.2V 1-cell batteries with 500mA default charge rate (adjustable to 250mA).
- Charging status indicated by orange (charging) and green (complete) LEDs.
- Slide switch to disable the 3.3V power supply via the Pico Enable pin.
- Reset button accessible at the end of the board.
- JST SH connector for I2C / Stemma QT / Qwiic connections, or plain GPIO wiring with 3V, GND, IO4 (SDA), and IO5 (SCL).
- Extra breakout holes for additional I2C connections or custom wiring.
- Three-hole connected strips for mini breadboard-style prototyping, with trace cutting options.
- Duplicate hole pads for easy solder-jumpering.
- Ground pads marked with white silkscreen for easy identification.
- Long ground strip near the reset button and connected holes for 3.3V power.
- Gold-plated pads for easy soldering.
Package Includes:
1 x Adafruit Proto Doubler PiCowbellQuick specs
- Item Type
- Accessory
- Model No. / Name
- Doubler
- Power Supply Voltage (V)
- 3.3
- Battery Connector Type
- JST PH
- Length (mm)
- 67.3
- Width (mm)
- 52



















