Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this plastic push button switch is a good fit for makers, students and electronics hobbyists. Main specs: item type Power Switch; model no. / name Push Button; operating voltage (v) 3-14. Check that your power source supplies 3-14 before connecting it.

Key Highlights

  • Item Type: Power Switch
  • Model No. / Name: Push Button
  • Operating Voltage (V): 3-14

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypePower Switch
Model No. / NamePush Button
Operating Voltage (V)3-14
Quiescent Current0.5 uA
Switch TypeLatching analog circuit
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The Adafruit Push-Button Power Switch Breakout, made by Adafruit, is listed in our plastic push button switch range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Power Switch
  • Model No. / Name: Push Button
  • Operating Voltage (V): 3-14 (match this to your power supply; too high a voltage can damage the part)
  • Quiescent Current: 0.5 uA (your supply must deliver at least this much current)
  • Switch Type: Latching analog circuit
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Adafruit Push-button Power Switch Breakout is a tidy little design that lets you control a DC power source using an everyday tactile button. The breakout uses a latching analog circuit that is triggered by a push of the button. Press once to turn on, then press again to turn off. The circuit uses a 3A P-FET to connect and disconnect the IN pin to the OUT pin. Works great from 3V to 14VDC and up to 3A (although the FET gets a little toasty at continuous 3A draw) yet has only 0.5uA quiescent current draw. Using it is easy: connect the power source to Ground and IN, then the load from Ground to OUT. We include a 12mm tactile switch that works well but you can solder in your own switch as well. Press the button (or short the button pins) to alternate between on or off. An on-board red LED will light up when active so you know it's working. There's a fourth KILL pin, which you can use to turn off the load and/or keep it off even if the button is pressed. When 1 or more volts is applied it will instantly turn off the FET. This allows your project to turn itself off.

Features:

  1. Simple Push Control: Toggle power on/off with a single tactile button press
  2. Voltage Range: Operates from 3V to 14V DC
  3. Current Handling: Up to 3A (P-FET may heat under continuous 3A)
  4. Ultra Low Power: 0.5μA quiescent current
  5. Status Indicator: Onboard red LED shows when power is active
  6. KILL Pin: External logic pin to instantly shut off power
  7. Switch Options: Includes 12mm tactile button, or solder your own
  8. Compact & Ready: Assembled, breadboard-friendly breakout with mounting holes
  9. Debounced Circuit: Clean switching action (note: very bouncy switches may affect behavior)
  10. One-Way Flow: Pass FET allows current backflow if load voltage > input (due to body diode)
  11. No Mechanical Isolation: Not suitable for AC or high-voltage switching

Package Includes:

1 x Adafruit Push-button Power Switch Breakout

Quick specs

Item Type
Power Switch
Model No. / Name
Push Button
Operating Voltage (V)
3-14
Quiescent Current
0.5 uA
Switch Type
Latching analog circuit
Shipping Weight
0.001 kg
See all specifications