Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this other esp wifi modules is a good fit for makers, students and electronics hobbyists. Main specs: item type WiFi Module; based on ESP32 Based; flash memory (mb) 4MB.

Key Highlights

  • Item Type: WiFi Module
  • Based On: ESP32 Based
  • Flash Memory (MB): 4MB

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeWiFi Module
Based OnESP32 Based
Flash Memory (MB)4MB
ProcessorESP32-S2, 32-bit Xtensa® single-core LX7 microprocessor, up to 240 MHz clock frequency, with integrated 2.4 GHz Wi-Fi and Bluetooth connectivity.
Memory Capacity4 MB of flash memory and 2 MB of PSRAM.
ConnectivityWi-Fi, Bluetooth 5.0
GPIO21 GPIO pins, 4 of which can be used as analog inputs, and 1 I2C port.
Power RatingCan be powered through USB, battery, or external power source, with a built-in battery charging circuit.
LEDBuilt-in RGB LED and NeoPixel LED for easy status indication.
Shipping Weight0.005 kg
Shipping Dimensions8 × 4 × 1 cm

Overview

The Adafruit QT Py ESP32-S2 WiFi Dev Board with STEMMA QT, made by Adafruit, is listed in our other esp wifi modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: WiFi Module (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Based On: ESP32 Based
  • Flash Memory (MB): 4MB (more memory leaves room for larger programs and buffers)
  • Processor: ESP32-S2, 32-bit Xtensa® single-core LX7 microprocessor, up to 240 MHz clock frequency, with integrated 2.4 GHz Wi-Fi and Bluetooth connectivity. (check your phone or controller supports the same Bluetooth version for full range)
  • Memory Capacity: 4 MB of flash memory and 2 MB of PSRAM. (more memory leaves room for larger programs and buffers)
  • Connectivity: Wi-Fi, Bluetooth 5.0 (check your phone or controller supports the same Bluetooth version for full range)
  • GPIO: 21 GPIO pins, 4 of which can be used as analog inputs, and 1 I2C port. (confirm your cable or board uses the same connector)
  • Power Rating: Can be powered through USB, battery, or external power source, with a built-in battery charging circuit. (note the battery type so you can order spares or the right charger)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

What has your favorite Espressif WiFi microcontroller, comes with our favorite connector - the STEMMA QT, a chainable I2C port, and has lots of Flash and RAM memory for your next IoT project? What will make your next IoT project flyyyyy? What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite lil chips, the ESP32-S2!

The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.

Please note the QT Py ESP32-S2 has a single-core 240 MHz chip, so it won't be as fast as ESP32's with dual-core. Also, there is no Bluetooth support. However, we are super excited about the ESP32-S2's native USB which unlocks a lot of capabilities for advanced interfacing! This ESP32-S2 mini-module we are using on the QT Py comes with 4 MB flash and 2 MB PSRAM so you can buffer massive JSON files for parsing!


Features:

  1. Same size, form factor, and pin-out as Seeed Xiao
  2. USB Type C connector - If you have only Micro B cables, this adapter will come in handy!
  3. ESP32-S2 240MHz Tensilica processor - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc!
  4. 4 MB Flash & 2 MB PSRAM
  5. Native USB supported by every OS - can be used in Arduino or CircuitPython as USB serial console, MIDI, Keyboard/Mouse HID, and even a little disk drive for storing Python scripts.
  6. Can be used with Arduino IDE or CircuitPython
  7. Built-in RGB NeoPixel LED with power control to reduce quiescent power in deep sleep
  8. Battery input pads on the underside with diode protection for external battery packs up to 6V input
  9. 13 GPIO pins: 11 on breakout pads, 2 more on QT connector 10 x 12-bit analog inputs (SPI high-speed pads do not have analog inputs) 8-bit analog output DAC PWM outputs on any pin Two I2C ports, one on the breakout pads, and another with STEMMA QT plug-n-play connector Hardware UART Hardware SPI on the high-speed SPI peripheral pins Hardware I2S on any pins 5 x Capacitive Touch with no additional components required
  10. 3.3V regulator with 600mA peak output
  11. Light sleep at 2~4mA, deep sleep at ~70uA
  12. Reset the switch for starting your project code over, and boot the 0 buttons for entering bootloader mode
  13. Really really small
  14. STEMMA QT: Features a STEMMA QT connector, which allows for easy and standardized connectivity to a variety of sensors and other modules.

Package Includes:

1 x Adafruit QT Py ESP32-S2 WiFi Dev Board with STEMMA QT

Quick specs

Item Type
WiFi Module
Based On
ESP32 Based
Flash Memory (MB)
4MB
Processor
ESP32-S2, 32-bit Xtensa® single-core LX7 microprocessor, up to 240 MHz clock frequency, with integrated 2.4 GHz Wi-Fi and Bluetooth connectivity.
Memory Capacity
4 MB of flash memory and 2 MB of PSRAM.
Connectivity
Wi-Fi, Bluetooth 5.0
See all specifications