Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Adafruit, this thermocouples is a good fit for makers, students and electronics hobbyists. Main specs: rated voltage (vdc) 3.3 to 5; model no. / name MAX31856 Breakout; measurement range -210°C to +1800°. Check that your power source supplies 3.3 to 5 before connecting it.

Key Highlights

  • Rated Voltage (VDC): 3.3 to 5
  • Model No. / Name: MAX31856 Breakout
  • Measurement Range: -210°C to +1800°

Ideal For

  • Everyday use

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Rated Voltage (VDC)3.3 to 5
Model No. / NameMAX31856 Breakout
Measurement Range-210°C to +1800°
Shipping Weight0.005 kg
Shipping Dimensions14 × 8 × 2 cm

Overview

The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout, made by Adafruit, is listed in our thermocouples range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Rated Voltage (VDC): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Model No. / Name: MAX31856 Breakout
  • Measurement Range: -210°C to +1800° (quoted range is usually line-of-sight; walls and interference shorten it)
  • Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 14 × 8 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference as well as calculations to handle any non-linearities. For a long time, we've suggested our MAX31855K breakout, which works great but is only for K-type thermocouples. Now we're happy to offer a great new thermocouple amplifier/converter that can handle just about any type of thermocouple and even give you notification when the temperature goes out of range or a fault occurs. Very fancy! This converter communicates over 4-wire SPI and can interface with any K, J, N, R, S, T, E, or B-type thermocouple. This breakout does everything for you and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator,, and level-shifting circuitry, all assembled and tested. It comes with a 2-pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perf board). We even added inline resistors and a filter capacitor on board for better stability, as recommended by Maxim. It goes great with our 1m K-type thermocouple or any other thermocouple!

Features and Specifications:

  1. Works with any K, J, N, R, S, T, E, or B-type thermocouple
  2. -210°C to +1800°C output in 0.0078125° resolution; note that many thermocouples have about ±2°C to ±6°C accuracy or worse depending on the temperature and type, so the resolution will be a lot better than the accuracy!
  3. Internal temperature reading
  4. 3.3 to 5v power supply and logic level compliant!
  5. SPI data requires any 4 digital I/O pins

Package Includes:

1 x Adafruit Universal Thermocouple Amplifier MAX31856 Breakout

Quick specs

Rated Voltage (VDC)
3.3 to 5
Model No. / Name
MAX31856 Breakout
Measurement Range
-210°C to +1800°
Shipping Weight
0.005 kg
Shipping Dimensions
14 × 8 × 2 cm
See all specifications