
1 / 4 · Click to enlarge
AI Summary
The ADS1115 breakout board offers 16-bit analog-to-digital conversion with four single-ended or two differential inputs and a programmable gain amplifier. It connects easily via I2C and runs from 2V to 5.5V, making it ideal for precise sensor readings.
Key Highlights
- 16-bit resolution for precise analog measurements
- Four single-ended or two differential input channels
- Programmable gain amplifier up to x16
- I2C interface with selectable addresses (0x48-0x4B)
- Wide 2V to 5.5V supply range
- Compact 28 x 16 mm PCB with ferrite filtering
Ideal For
- Electronics hobbyists needing precise analog measurements
- Arduino and Raspberry Pi users expanding ADC capabilities
- Students learning about data acquisition and sensors
- Engineers prototyping sensor interfaces
- Makers building low-power monitoring systems
Buying Tip
Check that your project's signal voltage falls within the ADS1115's input range and consider the PGA settings for optimal resolution.
Elecvora expert review
Our verdict
The ADS1115 breakout board delivers high-resolution analog-to-digital conversion in a compact, easy-to-use form factor. Its wide voltage range and I2C interface make it a versatile tool for many electronics projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 16-bit resolution for precise measurements
- Flexible input configuration (single-ended or differential)
- Programmable gain amplifier extends dynamic range
- Wide supply voltage compatibility
Cons
- Requires soldering headers for breadboard use
- No onboard voltage reference selection jumpers
- Limited to 860 samples per second
Best for
Projects needing accurate analog sensing with microcontrollers
Not ideal for
High-speed data acquisition or applications requiring more than 4 channels without multiplexing
Specifications
| Operating Voltage (V) | 2 to 5.5 |
|---|---|
| Model No. / Name | ADS1115 |
| PCB Size ( L x W ) mm | 28 x 16 |
| Weight (g) | 2 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 9 × 8 × 5 cm |
What's in the box
- 1 x ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier breakout board
Frequently Asked Questions
What is the maximum sampling rate of the ADS1115?
Can I connect multiple ADS1115 boards to the same microcontroller?
What is the operating voltage range?
Does the package include headers?
How do I change the I2C address?
Is the ADS1115 suitable for measuring negative voltages?
Overview
The ADS1115 is a breakout board featuring a 16-bit analog-to-digital converter (ADC) with four input channels that can be configured as single-ended or paired as differential inputs. It is designed for projects that require higher precision than the built-in ADC of most microcontrollers. The board includes a programmable gain amplifier (PGA) that can amplify small signals by up to 16 times, allowing you to measure low-voltage sensors with greater accuracy. Communication is handled through an I2C interface, and the board operates from a supply voltage between 2V and 5.5V, making it compatible with both 3.3V and 5V logic systems.
Key Features
- 16-bit resolution: Provides fine measurement steps for precise analog readings.
- Four single-ended or two differential inputs: Flexible configuration for different sensor types.
- Programmable gain amplifier: Boosts small signals up to x16 for better resolution.
- I2C interface: Simple two-wire connection to your microcontroller.
- Selectable I2C address: Up to four boards can share one bus, giving 16 single-ended channels.
- Wide supply range: Operates from 2V to 5.5V.
- Compact size: 28 x 16 mm PCB with ferrite beads for noise reduction.
Specifications Explained
Operating voltage (2 to 5.5V): The board can be powered from a wide range of sources, including 3.3V and 5V systems, so it fits easily into most microcontroller projects.
16-bit resolution: The ADC divides the input range into 65,536 steps, enabling detection of very small voltage changes.
Programmable gain amplifier: The PGA allows you to amplify weak signals before conversion, improving accuracy when measuring sensors with low output.
I2C interface: Uses SCL and SDA lines for communication. The 7-bit address can be set to 0x48, 0x49, 0x4A, or 0x4B via jumpers, so multiple boards can coexist on the same bus.
PCB size: 28 x 16 mm, with a weight of only 2 grams, making it easy to embed in small enclosures.
Compatibility and Requirements
The ADS1115 requires a microcontroller with an I2C interface. It works with 3.3V and 5V logic systems. No additional libraries are strictly required, but example code for Arduino and Raspberry Pi is commonly available. The board needs a power supply within the 2V to 5.5V range and connection to ground, SCL, and SDA.
Typical Uses
- Reading analog sensors with high precision
- Measuring low-voltage signals from thermocouples or strain gauges
- Data acquisition for hobbyist and educational projects
- Battery voltage monitoring
- Audio signal sampling
What's in the Box
1 x ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier breakout board.

Quick specs
- Operating Voltage (V)
- 2 to 5.5
- Model No. / Name
- ADS1115
- PCB Size ( L x W ) mm
- 28 x 16
- Weight (g)
- 2
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 9 × 8 × 5 cm














