
1 / 3 · Click to enlarge
AI Summary
A compact serial-controlled MP3 and TF card audio module with a 24-bit DAC and 85 dB SNR. It lets microcontrollers play voice prompts, alarms and background audio from a TF card without heavy audio processing.
Key Highlights
- Serial, IO and AD key control modes for flexible project integration
- 24-bit DAC with 85 dB SNR for clear decoded audio output
- Supports sampling rates from 8 kHz up to 48 kHz
- Reads FAT16 and FAT32 TF cards up to 32 GB
- Wide 3.2 to 5 V operating voltage suits common logic boards
- Compact 21 x 21 mm board weighing approximately 5 g
Ideal For
- Makers adding voice prompts to Arduino or microcontroller projects
- Automation and control panel builders needing alarm audio
- Interactive exhibit and kiosk developers using trigger-based sound
- Vehicle and access-point installers adding spoken guidance
- Hobbyists building standalone TF card audio players
Buying Tip
Format your TF card as FAT16 or FAT32 and keep tracks inside numbered folders before first use, because the module expects folder-based file organisation.
Elecvora expert review
Our verdict
A practical, low-cost audio breakout for projects that need reliable TF card playback without burdening the main controller. Its serial, IO and AD key control options make it adaptable, though it expects careful card preparation and a protected enclosure.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Dedicated 24-bit DAC with 85 dB SNR
- Serial, IO and AD key control modes
- Wide 3.2 to 5 V supply range
- Folder-based organisation for many tracks
- Very small 21 x 21 mm footprint
Cons
- TF card, speaker and wiring not included
- Requires FAT16 or FAT32 card preparation and folder structure
- Best suited to protected enclosures rather than exposed outdoor use
Best for
Makers and installers adding voice prompts, alarms or background audio to microcontroller projects
Not ideal for
Users wanting a plug-and-play speaker system with no wiring or card setup
Specifications
| Operating Voltage (V) | 3.2 to 5 |
|---|---|
| DAC | 24-bit |
| Signal to noise ratio (SNR) | 85 dB |
| Sampling Rate | 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48 KHz |
| Operating Temperature (°C) | -40 ~ +70 |
| Humidity Range | 5% ~ 95% |
| Length (mm) | 21 |
| Width (mm) | 21 |
| Weight (g) | 5 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 8 × 6 × 3 cm |
What's in the box
- 1 x MP3-TF-16P MP3 Disk TF Card Module Serial Port
Frequently Asked Questions
What file formats can the module play?
What size TF card does it support?
What voltage does the board need?
Can I control it without a microcontroller?
How many folders and tracks can I use?
Is a speaker included?
Overview
The MP3-TF-16P is a small breakout board that gives your project a dedicated audio playback path. Instead of streaming and decoding audio on your main microcontroller, the module handles MP3, WAV and WMA playback from a TF card and delivers the result through its own 24-bit DAC. That makes it a practical choice when you want reliable voice prompts, alerts or background sound without writing a full audio stack.
Control is available over a serial port, through IO pins or with AD key inputs, so the board can fit simple standalone builds as well as microcontroller-driven systems. It measures roughly 21 x 21 mm and weighs about 5 g, which keeps it easy to tuck into small enclosures.
Key Features
- Integrated audio decoding: plays MP3, WAV and WMA files from a TF card.
- 24-bit DAC output: delivers decoded audio with an 85 dB signal-to-noise ratio.
- Flexible sampling rates: supports 8, 11.025, 12, 16, 22.05, 24, 32, 44.1 and 48 kHz.
- Multiple control options: serial mode, IO control mode and AD key control mode.
- Folder-based track organisation: supports up to 100 folders with up to 255 tracks per folder.
- Adjustable playback: 30-level volume control and 6 selectable EQ settings.
Specifications Explained
The 3.2 to 5 V operating range means the board can share a supply with many common logic boards and small battery packs. The 24-bit DAC and 85 dB SNR describe the audio conversion stage: the DAC resolves fine detail in the waveform, while the SNR figure indicates how much the audio signal stands above the noise floor. For voice prompts and alerts, this combination supports clear, intelligible playback.
Sampling rate support from 8 kHz to 48 kHz covers both compact voice recordings and higher-quality music files. Lower rates save card space for spoken prompts, while 44.1 kHz and 48 kHz suit music and richer sound effects. The FAT16 and FAT32 file system support, with cards up to 32 GB, keeps card preparation straightforward on most computers.
The -40 to +70 degrees Celsius operating range and 5% to 95% humidity range describe the environment the board is rated for. It is best used inside a protected enclosure where condensation and direct moisture are avoided.
Compatibility and Requirements
The module works with microcontrollers that have a serial port, and it can also run in standalone IO or AD key control modes. A TF card formatted as FAT16 or FAT32 is required for audio storage, with a maximum supported capacity of 32 GB. Audio files should be organised into folders, with up to 100 folders and up to 255 tracks per folder. The board needs a suitable 3.2 to 5 V supply and a speaker or audio output stage connected to its output.
Typical Uses
- Voice prompts and announcements in automation and control panels
- Alarm and fault notification sounds in equipment
- Interactive exhibits and museum-style audio triggers
- Vehicle, station or access-point voice guidance
- Background music with spot announcements in small installations
What's in the Box
One MP3-TF-16P MP3 Disk TF Card Module Serial Port board. TF card, speaker and connecting hardware are not included.

Quick specs
- Operating Voltage (V)
- 3.2 to 5
- DAC
- 24-bit
- Signal to noise ratio (SNR)
- 85 dB
- Sampling Rate
- 8 / 11.025 / 12/16 / 22.05 / 24/32 / 44.1 / 48 KHz
- Operating Temperature (°C)
- -40 ~ +70
- Humidity Range
- 5% ~ 95%














