Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by ANALOG DEVICES, this buffers and transceivers ic is a good fit for everyday home and hobby use. Main specs: manufacturer Analog Devices; communication mode Full Duplex; data rate 16Mbps. Check that your power source supplies 2.97V before connecting it.

Key Highlights

  • Manufacturer: Analog Devices
  • Communication Mode: Full Duplex
  • Data Rate: 16Mbps

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerAnalog Devices
Communication ModeFull Duplex
Data Rate16Mbps
Min Supply Voltage2.97V
Max. Supply Voltage (V)3.63V
No. of Pins8
ESD Protection±15 kV (HBM)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The MAX3077EASA+-ANALOG DEVICES-MAX3077EASA+-Transceiver RS422, RS485, 2.97V-3.63V supply, 1 Driver, NSOIC-8, made by ANALOG DEVICES, is listed in our buffers and transceivers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Analog Devices
  • Communication Mode: Full Duplex
  • Data Rate: 16Mbps
  • Min Supply Voltage: 2.97V (match this to your power supply; too high a voltage can damage the part)
  • Max. Supply Voltage (V): 3.63V (match this to your power supply; too high a voltage can damage the part)
  • No. of Pins: 8
  • ESD Protection: ±15 kV (HBM)
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MAX3077EASA+ is a ±15KV ESD protected, fail-safe, hot swap RS485/RS422 transceiver in 8 pin NSOIC package. This 3.3V transceiver has one driver and one receiver. It includes fail-safe circuitry which provides logic high receiver output when receiver inputs are open or shorted. The receiver provides logic high if all transmitters on a terminated bus are disabled (high impedance). The device includes a hot swap capability to eliminate false transitions on the bus during power-up or hot insertion. The MAX3077E driver slew rates are not limited and provides transmit speeds up to 16Mbps. This transceivers draw 800μA of supply current when unloaded or when fully loaded with the drivers disabled. The transceiver has 1/8 unit load receiver input impedance allowing up to 256 transceivers on the bus. It is typically used in lighting systems.

Specifications:

  1. IC Type: RS422 / RS485 Transceiver
  2. No. of Receivers: 1Receivers
  3. No. of Transmitters: 1
  4. Communication Mode: Full Duplex
  5. Data Rate Max: 16Mbps
  6. Supply Voltage Min: 2.97V
  7. Supply Voltage Max: 3.63V
  8. IC Case / Package: NSOIC
  9. No. of Pins: 8Pins
  10. No. of Nodes: 256
  11. ESD Protection: ±15 kV (HBM)
  12. Fail Safe: Open, Short
  13. Operating Temperature Min: -40°C
  14. Operating Temperature Max: 125°C

Package Includes:

1 x MAX3077EASA+-ANALOG DEVICES-MAX3077EASA+-Transceiver RS422, RS485, 2.97V-3.63V supply, 1 Driver, NSOIC-8

Quick specs

Manufacturer
Analog Devices
Communication Mode
Full Duplex
Data Rate
16Mbps
Min Supply Voltage
2.97V
Max. Supply Voltage (V)
3.63V
No. of Pins
8
See all specifications