Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Arducam, this arducam cameras and accessories is a good fit for makers, students and electronics hobbyists. Main specs: item type Camera Module; resolution 8MP; shutter type Rolling Shutter.

Key Highlights

  • Item Type: Camera Module
  • Resolution: 8MP
  • Shutter Type: Rolling Shutter

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeCamera Module
Resolution8MP
Shutter TypeRolling Shutter
IR SensitivityVisible light, Integral IR Filter
Optical Size1/4 inch
Lens SpecEFL: 2.8mm, F.NO: 2.8, View Angle: 75 Deg. (Horizontal)
Frame Rate1080p30, 720p60 and VGA90 video modes
InterfaceMIPI CSI-2 2-lane
Shipping Weight0.02 kg
Shipping Dimensions5 × 5 × 3 cm

Overview

The Arducam 8MP IMX219 Camera for Raspberry Pi 4 Model B, Pi 3/3B+, Pi Zero 2W and More, made by Arducam, is listed in our arducam cameras and accessories range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Camera Module (resolution is one factor; lens and lighting matter as much)
  • Resolution: 8MP
  • Shutter Type: Rolling Shutter
  • IR Sensitivity: Visible light, Integral IR Filter
  • Optical Size: 1/4 inch (measure your mounting space before ordering)
  • Lens Spec: EFL: 2.8mm, F.NO: 2.8, View Angle: 75 Deg. (Horizontal)
  • Frame Rate: 1080p30, 720p60 and VGA90 video modes
  • Interface: MIPI CSI-2 2-lane (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is Arducam 8MP IMX219 Camera for Raspberry Pi 4 Model B, Pi 3/3B+, Pi Zero 2W and More.

The Newest IMX219 Low Distortion M12 Mount Camera Module for Raspberry Pi is mainly designed for Raspberry Pi. The highlight of this camera is its very low distortion (<3%) of the lens. No less than the Raspberry Pi official camera V2, this camera module is also equipped with a high-definition IMX219 8MP sensor for shooting HD video and still images.

It is excellent in image quality, color fidelity, and low light, supports 1080p30, 720p60, and VGA90 video modes, and supports still capture.

For beginners, this is a very easy camera module to get started; for advanced players, this camera module has more knowledge that you should explore and DIY.


Useful link:

  1. To use this camera, please follow this tutorial for hardware  and software setup.
  2. After  software setup, you need to follow this tutorial to test the camera.

Features:

  1. Raspberry Pi Camera: Designed for Raspberry Pi, this 8MP HD camera module has a Sony IMX219 8MP pixel sensor with low distortion (<3%) M12 lens. EFL: 2.8mm, F.NO: 2.8, View Angle: 75 Deg. (Horizontal).
  2. 8MP More than HD: Supports 3280 × 2464 pixel still images, as well as 1080p30, 720p60, and VGA90 video modes, and still captures. The Raspberry Pi Camera Board v2 – 8 Megapixels is a leap forward in image quality, color fidelity, and low light than the camera v1.
  3. Wide Compatibility: The camera is not only compatible with all models of Raspberry Pi 1, 2, 3, and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Raspberry Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Raspberry Pi OS (Legacy).
  4. Easy to setup: The package comes with a 15cm and 50cm 15pin FPC cable, and a 15cm yellow 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera.
  5. Application: Easy to use for beginners, and for advanced gamers, it offers more to explore. Perfect for time-lapse, slow motion, home security applications, monitoring Octoprint 3D Printer, and wildlife camera trap applications.

Package Includes:

1 x Arducam 8MP IMX219 Camera for Raspberry Pi

Quick specs

Item Type
Camera Module
Resolution
8MP
Shutter Type
Rolling Shutter
IR Sensitivity
Visible light, Integral IR Filter
Optical Size
1/4 inch
Lens Spec
EFL: 2.8mm, F.NO: 2.8, View Angle: 75 Deg. (Horizontal)
See all specifications