
1 / 3 · Click to enlarge
At a glance
Made by Arducam, this arducam cameras and accessories is a good fit for makers, students and electronics hobbyists. Main specs: item type Camera Module; resolution 8MP; sensor color Color.
Key Highlights
- Item Type: Camera Module
- Resolution: 8MP
- Sensor Color: Color
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Item Type | Camera Module |
|---|---|
| Resolution | 8MP |
| Sensor Color | Color |
| Shutter Type | Rolling Shutter |
| Active Pixels | 3280 (H) × 2464 (V) |
| Image Sensor Format | Type 1/4″ |
| Pixel Size (um) | 1.12μm×1.12μm |
| Additional Specs. | CSI-2 Data Output: 2-lane mode |
| Data Format | Raw Bayer 10bit |
| Length (mm) | 36 |
| Width (mm) | 36 |
| Weight (g) | 20 |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 5 × 5 × 5 cm |
Overview
The Arducam B01678MP 8MP PTZ Camera for Raspberry Pi & Jetson Nano ,Xavier NX, Pan Tilt, Zoom, made by Arducam, is listed in our arducam cameras and accessories range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Camera Module (resolution is one factor; lens and lighting matter as much)
- Resolution: 8MP
- Sensor Color: Color
- Shutter Type: Rolling Shutter
- Active Pixels: 3280 (H) × 2464 (V)
- Image Sensor Format: Type 1/4″
- Pixel Size (um): 1.12μm×1.12μm (measure your mounting space before ordering)
- Additional Specs.: CSI-2 Data Output: 2-lane mode
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Download Link:
- First you need to do Hardware setup. You need to make the connections as shown in the link .
- After connection, it is time for the Software setup. Hence go though the link . Follow the Python-OpenCV tutorial and then arducam PTZ camera example .
- To install the Libcamera, You need to follow the commands given in this link . You need to follow all 5 steps given in the link.
- After 3rd step, execute the commands given in the " List all cameras" and "Specify camera" . The camera will be turned ON and OFF quickly .
- To hold it in ON position, you need to increase the time also. Hence , follow the "autofocus" command. You will see the camera is ON for more time . You can do the focus adjustment as given in the link.
Features:
- Real PTZ with servos for directional control and varifocal lens for optical zoom now comes to the Raspberry Pi and Jetson Nano / Xavier NX
- Switchable IR Cut through software for your day/night vision
- Make full use of the CSI connector now that a single camera can be used to monitor places that should be covered by multiple ones
- Autofocus control, pan/tilt/zoom keyboard control supported in software
- 8MP IMX219 Camera board
- PTZ Controller Board Connector Part Number: S6B-XH-A-1
Applications:
- IoT cameras
- Robot cameras
- Wildlife cameras
- Other security and surveillance projects
Package includes:
1 x Arducam PTZ Pan Tilt Zoom Lens
1 x Controller Board
1 x 8MP Camera Board
1 x 15-Pin FPC Cable (11.8 in/30 cm)
1 x XH2.54 Jumper wire with 6Pin Female Connector (11.8 in/30 cm)
Quick specs
- Item Type
- Camera Module
- Resolution
- 8MP
- Sensor Color
- Color
- Shutter Type
- Rolling Shutter
- Active Pixels
- 3280 (H) × 2464 (V)
- Image Sensor Format
- Type 1/4″

















