
1 / 2 · Click to enlarge
At a glance
Made by Arducam, this arducam cameras and accessories is a good fit for makers, students and electronics hobbyists. Main specs: item type Extension Cable; supported sensors Sony IMX219; thickness (mm) 0.1mm(Cable).
Key Highlights
- Item Type: Extension Cable
- Supported sensors: Sony IMX219
- Thickness (mm): 0.1mm(Cable)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Extension Cable |
|---|---|
| Supported sensors | Sony IMX219 |
| Thickness (mm) | 0.1mm(Cable) |
| Optical Format | Type 1/4(Diagonal 4.60mm) |
| Cable Length | 300 |
| Width (mm) | 9 |
| Weight (g) | 2 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 17 × 6.5 × 1 cm |
Overview
The Arducam B0186 Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable, made by Arducam, is listed in our arducam cameras and accessories range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Extension Cable
- Supported sensors: Sony IMX219 (confirm your cable or board uses the same connector)
- Thickness (mm): 0.1mm(Cable)
- Optical Format: Type 1/4(Diagonal 4.60mm)
- Cable Length: 300 (measure your mounting space before ordering)
- Width (mm): 9 (measure your mounting space before ordering)
- Weight (g): 2 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Arducam B0186 Sensor Extension Cable is an ideal solution for extending the reach of the IMX219 sensor, enabling easy integration of the Raspberry Pi Camera Module V2 or Arducam's IMX219 camera with the Nvidia Jetson Board in tight spaces. This 300mm cable allows you to place the camera in a smaller enclosure, or even through a narrow tube, making it perfect for projects like spy cameras or space-constrained installations. The cable is designed with electromagnetic shielding for improved signal integrity, ensuring high-quality image capture. Simple to set up and compatible with Raspberry Pi and Jetson platforms, this extension cable opens up creative possibilities for your projects.
Note : Raspberry Pi V2 camera board or Arducam Nvidia Jetson IMX219 camera board is needed to work with this extension cable. It does NOT support all sensors except IMX219. Please detach and re-attach the connectors gently and carefully, otherwise you might cause damage to the connection. The Raspberry Pi Camera Module V2 is NOT included.Features:
- Flexible Camera Placement: Extends camera vision into narrow spaces or enclosures.
- Plug-and-Play: Easy to set up with detachable connectors.
- Shielded Cable: Electromagnetic shielding for stable performance.
- Compatible: Works with Raspberry Pi Camera V2 and Nvidia Jetson Board.
- Long Cable Length: 300mm allows greater flexibility in camera placement.
- High-Quality Sensor: Uses Sony IMX219 for superior imaging.
Package Includes:
1 x Arducam B0186 Sensor Extension Cable for Raspberry Pi Camera Module V2, 300MM/1FT Cable
1 x Manual
Quick specs
- Item Type
- Extension Cable
- Supported sensors
- Sony IMX219
- Thickness (mm)
- 0.1mm(Cable)
- Optical Format
- Type 1/4(Diagonal 4.60mm)
- Cable Length
- 300
- Width (mm)
- 9

















