Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Arducam, this arducam cameras and accessories is a good fit for makers, students and electronics hobbyists. Main specs: item type Camera Module; sensor Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534); output RAW10/8, COMP8.

Key Highlights

  • Item Type: Camera Module
  • Sensor: Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534)
  • Output: RAW10/8, COMP8

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeCamera Module
SensorSony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534)
OutputRAW10/8, COMP8
LensAutofocus;  f/1.75
Focal Length (mm)4.28; FoV: 80°
Focus10 cm ~ infinite
IR Cut FilterIntegrated
Tripod mount1/4”-20
EnclosureABS, also compatible w/ camera module v1 & v2.
Cable Length150 mm
Shipping Weight0.05 kg
Shipping Dimensions10 × 7 × 3 cm

Overview

The Arducam B0371 IMX519 Autofocus Camera Module for Raspberry Pi and Jetson Nano, made by Arducam, is listed in our arducam cameras and accessories range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Camera Module (resolution is one factor; lens and lighting matter as much)
  • Sensor: Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534) (measure your mounting space before ordering)
  • Output: RAW10/8, COMP8
  • Lens: Autofocus;  f/1.75
  • Focal Length (mm): 4.28; FoV: 80° (measure your mounting space before ordering)
  • Focus: 10 cm ~ infinite
  • IR Cut Filter: Integrated
  • Tripod mount: 1/4”-20

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Arducam High-Resolutions Autofocus camera is an exclusive camera board that takes what Raspberry Pi V1, V2 and HQ have to offer, and excels in every single aspect.

It takes zero compromise in specs. With a resolution at 16 megapixels (compared to 8MP and 12MP), an autofocus lens, a V2-like form factor and boatloads of improvements, the camera provides a better choice for a whole world of industrial/consumer/etc. applications, it’s compatible with any existing Pi models, works with the latest software from the foundation, and leverages the same tuning algorithms used in the official camera modules.

The package contains a camera board with a Sony IMX519 sensor and an autofocus lens, an FPC cable, and just like the HQ module, it has an integrated tripod mount too.


Useful link:

  1. To use this camera, please follow this tutorial for hardware setup.
  2.  After hardware setup, please follow this tutorial for software setup.

Safety instructions
  1. Before connecting, you should always power the Raspberry Pi off and remove the power supply first.
  2. Make sure the cable on the camera board is locked in place.
  3. Make sure the cable is correctly inserted in the Raspberry Pi board’s MIPI CSI-2 connector.
  4. Avoid high temperatures.
  5. Avoid water, moisture, or conductive surfaces while in operation.
  6. Avoid folding, or straining the flex cable.
  7. Avoid cross-threading with tripods.
  8. Gently push/pull the connector to avoid damaging the printed circuit board.
  9. Avoid moving or handling the printed circuit board excessively while it’s in operation.
  10. Handle by the edges to avoid damages from electrostatic discharge.
  11. Where the camera board is stored should be cool and as dry as possible.
  12. Sudden temperature/humidity changes can cause dampness in the lens and affect the image/video quality.

Package Includes:

1 x Arducam B0371 IMX519 Autofocus Camera Module for Raspberry Pi and Jetson Nano

Quick specs

Item Type
Camera Module
Sensor
Sony IMX519 stacked, back-illuminated sensor 16 megapixels 1.22 µm × 1.22 µm pixel size7.103 mm diagonal (Type 1/2.534)
Output
RAW10/8, COMP8
Lens
Autofocus;  f/1.75
Focal Length (mm)
4.28; FoV: 80°
Focus
10 cm ~ infinite
See all specifications

More from Arducam

View all →

Related Products

View all →