Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Arducam B400 Mega 3MP SPI Camera Module adds sharp image capture to any microcontroller via a standard SPI interface. Its open-source SDK and high-level API make integration quick and power-efficient.

Key Highlights

  • 3MP resolution with 2048x1536 pixel size for clear images
  • Standard 4-wire SPI interface works with any microcontroller
  • Open-source MIT-licensed SDK with high-level API commands
  • Low power consumption: under 200mW in sleep mode
  • Quick wake-up within 42ms for power-sensitive applications
  • Includes protective camera case and 300mm 6-pin cable

Ideal For

  • Makers building IoT sensor nodes with microcontrollers
  • Students learning embedded vision on Arduino or ESP32
  • Engineers prototyping asset monitoring systems
  • Hobbyists capturing environmental or motion data
  • Developers needing multi-camera setups on a single MCU

Buying Tip

Check that your microcontroller has a free SPI interface and enough memory to handle 3MP images; the open-source SDK supports many boards but always verify the documentation for your specific model.

Elecvora expert review

Our verdict

The Arducam B400 Mega 3MP SPI Camera Module is a well-documented and versatile choice for adding vision to microcontroller projects. Its open-source SDK and high-level API reduce development time, while low power consumption suits battery-operated devices.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Works with virtually any microcontroller via SPI
  • Open-source SDK with high-level API simplifies coding
  • Low power consumption with fast wake-up
  • Includes protective case and cable
  • Supports up to four cameras on one MCU with adapter

Cons

  • No MCU board included; requires separate microcontroller
  • Rolling shutter may cause motion artifacts in fast-moving scenes
  • Limited to 3MP resolution, which may not suit high-detail applications

Best for

Makers and engineers needing a flexible, well-supported camera for microcontroller-based monitoring and automation.

Not ideal for

Projects requiring high-resolution imaging or global shutter for fast motion capture.

Specifications

Item TypeCamera Module
Resolution3MP
Optical Size1/4”
Speed8Mhz
Pixel Size (um)2048×1536
Power Supply Voltage (V)3.3V-5V
Interface4-wire SPI
Shutter TypeRolling Shutter
Power Consumption (W)185-585mW
Depth Field of View (Deg.)68.75°(D)
F.NOF2.8
Lens InfoStock Lens
Focus Distance6cm-INF
Operating Current (A)56-136mA
Output FormatRGB/YUV/JPEG
Board Size (mm)33x33x17
Shipping Weight0.027 kg
Shipping Dimensions9 × 5 × 2 cm

What's in the box

  • 1 x Arducam B400 Mega 3MP SPI Camera Module with Camera Case
  • 1 x 300mm 6-pin cable

Frequently Asked Questions

Which microcontrollers are compatible with this camera?
The camera works with any microcontroller that has a standard SPI interface, including Arduino, STM32, ESP8266/ESP32, MSP430, Nordic, Renesas, and many others. No specific board is included, so you will need to provide your own.
What is the power requirement for the camera?
The module operates on 3.3V to 5V and draws between 56mA and 136mA, with power consumption from 185mW to 585mW depending on activity. It also supports quick sleep and wake-up for low-power applications.
Can I connect multiple cameras to one microcontroller?
Yes, up to four cameras can be used on a single MCU with an adapter board (not included). They capture simultaneously with sequential readout.
What is included in the package?
The package includes one Arducam B400 Mega 3MP SPI Camera Module with a camera case and one 300mm 6-pin cable. No microcontroller board is included.
Is the software open-source?
Yes, the SDK is fully open-source under the MIT license, with a lean architecture and hardware abstraction layer that makes it easy to add support for new microcontrollers.
What should I do if the camera does not work?
First, verify the wiring and power supply, then ensure you have installed the correct SDK and are using the appropriate code for your microcontroller. Refer to the documentation for troubleshooting steps.

Overview

The Arducam B400 Mega 3MP SPI Camera Module is a compact imaging solution designed for microcontroller-based projects. It combines a 3MP sensor with a 4-wire SPI interface, making it compatible with a wide range of boards, from Arduino and STM32 to ESP8266/ESP32 and Raspberry Pi Pico. The module ships with a protective camera case and a 300mm 6-pin cable for flexible installation.

Key Features

  • High-level API: Control the camera with simple commands, similar to using a DSLR via button clicks.
  • Power saving: Quick sleep and wake-up (within 42ms) with power consumption under 200mW.
  • Multiplexing: Up to four cameras can run on a single MCU using an adapter board, capturing simultaneously with sequential readout.
  • Open-source SDK: MIT-licensed SDK with a lean architecture and hardware abstraction layer for easy porting to new MCUs.
  • Broad compatibility: Works with any microcontroller that has a standard SPI interface, native or emulated.

Specifications Explained

The 3MP resolution (2048x1536 pixels) provides detailed images suitable for monitoring and analysis. The 1/4-inch optical size and F2.8 stock lens offer a 68.75° diagonal field of view, while the focus distance ranges from 6cm to infinity, allowing close-up and distant subjects. The rolling shutter is typical for this class of sensor. Power supply voltage is 3.3V to 5V, with current consumption between 56mA and 136mA, and power consumption from 185mW to 585mW depending on operation. Output formats include RGB, YUV, and JPEG. The board measures 33x33x17mm.

Compatibility and Requirements

The camera works with any microcontroller board that supports SPI, including Arduino, STM8/STM32, ESP8266/ESP32, MSP430, Nordic, Renesas, and many others. Note that no MCU board is included; you will need the corresponding code and software to use it. Refer to the documentation for details. The package contains small parts, so keep it away from children.

Typical Uses

  • Assets monitoring
  • Space journey projects
  • Environmental observation
  • Dynamics capture
  • IoT automation

What's in the Box

  • 1 x Arducam B400 Mega 3MP SPI Camera Module with Camera Case
  • 1 x 300mm 6-pin cable

Quick specs

Item Type
Camera Module
Resolution
3MP
Optical Size
1/4”
Speed
8Mhz
Pixel Size (um)
2048×1536
Power Supply Voltage (V)
3.3V-5V
See all specifications