
1 / 2 · Click to enlarge
At a glance
Made by Arducam, this arducam cameras and accessories is a good fit for makers, students and electronics hobbyists. Main specs: pixel size (um) 3.6 µm x 3.6 µm; additional specs. 81mm(Diagonal two hole center distance); shutter type Electronic Rolling Shutter.
Key Highlights
- Pixel Size (um): 3.6 µm x 3.6 µm
- Additional Specs.: 81mm(Diagonal two hole center distance)
- Shutter Type: Electronic Rolling Shutter
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Pixel Size (um) | 3.6 µm x 3.6 µm |
|---|---|
| Additional Specs. | 81mm(Diagonal two hole center distance) |
| Shutter Type | Electronic Rolling Shutter |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 6 × 4 × 2 cm |
Overview
The Arducam HM01B0 QVGA CMOS Monochrome Camera Module for RP2040 & Arduino, made by Arducam, is listed in our arducam cameras and accessories range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Pixel Size (um): 3.6 µm x 3.6 µm (measure your mounting space before ordering)
- Additional Specs.: 81mm(Diagonal two hole center distance)
- Shutter Type: Electronic Rolling Shutter
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 6 × 4 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Ultralow Power Image Sensor (ULPIS) designed for Always On vision devices and applications
- High sensitivity 3.6µ BrightSenseTM pixel technology
- 320 x 320 active pixel resolution with support for QVGA window, vertical flip and horizontal mirror readout
- Programmable black level calibration target, frame size, frame rate, exposure, analog gain (up to 8x) and digital gain (up to 4x)
- Automatic exposure and gain control loop with support for 50 / 60Hz flicker avoidance
- Flexible 1bit, 4bit, and 8bit video data interface with video frame and line sync
- Motion Detection circuit with programmable ROI and detection threshold with digital output to serve as an interrupt
- On-chip self oscillator
- I2C 2-wire serial interface for register access
- High CRA for low profile module design
Package include:
1 x Arducam HM01B0 QVGA CMOS Monochrome Camera Module for RP2040 & ArduinoQuick specs
- Pixel Size (um)
- 3.6 µm x 3.6 µm
- Additional Specs.
- 81mm(Diagonal two hole center distance)
- Shutter Type
- Electronic Rolling Shutter
- Shipping Weight
- 0.01 kg
- Shipping Dimensions
- 6 × 4 × 2 cm

















