Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Arducam, this arducam cameras and accessories is a good fit for makers, students and electronics hobbyists. Main specs: item type Camera Module; lens Format: 1/2.3 inch Focal Length: 6mm Aperture (F): Max. F1.2 Field of View (FOV): 65° (H) Mount: CS-Mount Back Focal Length: 7.53mm MOD: 0.2m Dimension: Φ30×31mm Weight: 53g; camera board Board Size: 38mm×38mm Hole Pitch: Compatible with 29mm, 30mm, 34mm Peak Current: 300mA.

Key Highlights

  • Item Type: Camera Module
  • Lens: Format: 1/2.3 inch Focal Length: 6mm Aperture (F): Max. F1.2 Field of View (FOV): 65° (H) Mount: CS-Mount Back Focal Length: 7.53mm MOD: 0.2m Dimension: Φ30×31mm Weight: 53g
  • Camera board: Board Size: 38mm×38mm Hole Pitch: Compatible with 29mm, 30mm, 34mm Peak Current: 300mA

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeCamera Module
LensFormat: 1/2.3 inch Focal Length: 6mm Aperture (F): Max. F1.2 Field of View (FOV): 65° (H) Mount: CS-Mount Back Focal Length: 7.53mm MOD: 0.2m Dimension: Φ30×31mm Weight: 53g
Camera boardBoard Size: 38mm×38mm Hole Pitch: Compatible with 29mm, 30mm, 34mm Peak Current: 300mA
Focal Length (mm)6mm
Overall DimensionΦ30×31mm
Shipping Weight0.1 kg
Shipping Dimensions8 × 5 × 3 cm

Overview

The Arducam High Quality IR-CUT Camera for Raspberry Pi, made by Arducam, is listed in our arducam cameras and accessories range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Camera Module (resolution is one factor; lens and lighting matter as much)
  • Lens: Format: 1/2.3 inch Focal Length: 6mm Aperture (F): Max. F1.2 Field of View (FOV): 65° (H) Mount: CS-Mount Back Focal Length: 7.53mm MOD: 0.2m Dimension: Φ30×31mm Weight: 53g (measure your mounting space before ordering)
  • Camera board: Board Size: 38mm×38mm Hole Pitch: Compatible with 29mm, 30mm, 34mm Peak Current: 300mA (resolution is one factor; lens and lighting matter as much)
  • Focal Length (mm): 6mm (measure your mounting space before ordering)
  • Overall Dimension: Φ30×31mm (measure your mounting space before ordering)
  • Shipping Weight: 0.1 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 8 × 5 × 3 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a Arducam High Quality IR-CUT Camera for Raspberry Pi. This Arducam module uses the same 12MP IMX477 image sensor as the Raspberry Pi High-Quality Camera but offers a mechanical IR cut-off filter switched automatically based on light conditions. The official RPi HQ camera is not sensitive to infrared, and there won’t be a NoIR version. On the contrary, this Arducam camera module not only offers sensitivity to infrared but also keeps the natural feeling during daylight. It’s fully compatible with all Raspberry Pi models with a camera connector.

Important Note On The IMX477 MiPi Lanes

Our IMX477 camera module support 4-lane in hardware, but the 4-lane camera driver requires extra customization. Here is why:

  1. Standard Raspberry Pi and Jetson Nano/Xavier NX can’t physically support a 4-lane connection (both of them only have 2-lane CSI connectors). Only the Raspberry Pi Compute Module and some 3rd party Jetson Carrier Boards come with 4-lane hardware support. Therefore, it’s not a general need.

  2. Extra works, specifically camera drivers, are required for a 4-lane connection other than the 4-lane physical connector. And the drivers are limited by the performances of the platform itself. For example, 4-lane can’t unlock 4k video on Raspberry Pi because the VideoCore does not currently support it. Jetson Nano is also to some extent limited because of the encoding capabilities. You need to make sure you really need it.


Useful Link:

https://projects.raspberrypi.org/en/projects/getting-started-with-picamera

   Download Links:

  1.  First, you need to do a Hardware setup. You need to make the connections as shown in the link. For software setup, the commands are given in the same link.

Package Includes:

1 x Arducam High Quality IR-CUT Camera for Raspberry Pi

Quick specs

Item Type
Camera Module
Lens
Format: 1/2.3 inch Focal Length: 6mm Aperture (F): Max. F1.2 Field of View (FOV): 65° (H) Mount: CS-Mount Back Focal Length: 7.53mm MOD: 0.2m Dimension: Φ30×31mm Weight: 53g
Camera board
Board Size: 38mm×38mm Hole Pitch: Compatible with 29mm, 30mm, 34mm Peak Current: 300mA
Focal Length (mm)
6mm
Overall Dimension
Φ30×31mm
Shipping Weight
0.1 kg
See all specifications

More from Arducam

View all →

Related Products

View all →