
1 / 3 · Click to enlarge
AI Summary
A compact M12 screw-mount lens with a 1.71 mm focal length that delivers a 184° diagonal field of view on 1/3" sensors. Its built-in 650 nm IR-cut filter keeps visible-light colours accurate for wide-angle robotics, VR and surveillance builds.
Key Highlights
- 1.71 mm focal length for an extremely wide 184° diagonal view
- Standard M12 screw mount for quick lens swapping on compatible boards
- Built-in 650 nm IR-cut filter tuned for visible-light colour accuracy
- Slim 15 mm diameter and 19.7 mm length fit tight enclosures
- Weighs only 7 g, so it adds almost nothing to a camera build
- Manual focus adjustment after threading into an M12 holder
Ideal For
- Robotics builders needing a wide awareness view
- VR and panoramic capture experimenters
- Surveillance and monitoring prototype developers
- Makers upgrading an M12 camera board lens
- FPV and wide-angle camera hobbyists working with M12 holders
Buying Tip
Confirm your camera board already has an M12 lens holder, since the holder is not included and the lens will not fit a bare Raspberry Pi Camera Module V2.
Elecvora expert review
Our verdict
The LN009 is a practical choice when you need a very wide view from a small M12 camera board and want natural daylight colours. It is a specialist lens, so expect fisheye distortion and plan for manual focus.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very wide 184° diagonal field of view
- Built-in 650 nm IR-cut filter for visible-light colour
- Small 15 mm barrel and 7 g weight
- Standard M12 mount for easy swapping
Cons
- Lens holder is not included
- Not directly compatible with the official Raspberry Pi Camera Module V2 without an M12 holder
- Strong edge distortion typical of an ultra-wide lens
Best for
Wide-angle robotics, VR and surveillance builds on M12 camera boards
Not ideal for
Users who need a narrow, low-distortion lens or infrared night imaging
Specifications
| Item Type | Camera Lens |
|---|---|
| Lens Mount | M12 screw mount |
| Optical Format | 1/3" |
| Field of View (FOV) | 184° (Diagonal) |
| IR Sensitivity | With 650nm IR-cut filter |
| Compatibility | Arducam B0031, Arducam B0103, M12 boards |
| Diameter (mm) | 15 |
| Length (mm) | 19.7 |
| Weight (g) | 7 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 5 × 4.5 × 2 cm |
What's in the box
- 1 x Arducam LN009 1/3" M12 Mount 1.71mm Focal Length Camera Lens M30171H16
Frequently Asked Questions
Does this lens fit the official Raspberry Pi Camera Module V2?
Which Arducam boards is it listed as compatible with?
How wide is the field of view?
Does it work for night vision?
How do I focus the lens?
What is included in the package?
Overview
The Arducam LN009 is a small interchangeable lens for camera boards that use an M12 screw mount. With a 1.71 mm focal length and a 1/3" optical format, it produces a 184° diagonal field of view, which is wide enough to take in a full room, a robot's surroundings or a fisheye-style scene from a single fixed position.
Unlike a bare wide-angle lens, this model includes a 650 nm IR-cut filter. That filter blocks infrared light and keeps colours closer to what the eye sees in normal daylight, which is helpful when the footage needs to look natural rather than washed out.
Key Features
- Ultra-wide coverage: the 1.71 mm focal length and 184° diagonal FOV capture expansive scenes.
- M12 threaded mount: screw it into a compatible holder and swap lenses without tools.
- IR-cut filter: the 650 nm filter is optimised for visible-light capture.
- Compact barrel: 15 mm diameter and 19.7 mm length suit small camera housings.
- Light weight: at 7 g it will not burden gimbals or lightweight frames.
Specifications Explained
Focal length and FOV: a short 1.71 mm focal length is what makes the 184° diagonal view possible. Expect strong perspective distortion near the edges, which is normal for a lens this wide and is often the desired fisheye look.
Optical format: the lens is specified for 1/3" sensors. Using it on a much larger sensor may not cover the full image circle, so match it to a 1/3"-class board where possible.
IR-cut filter: the 650 nm cut-off is aimed at visible-light work. It is not a lens for night vision or infrared-only imaging.
Size and weight: the 15 mm diameter and 19.7 mm length are useful when space inside an enclosure is limited, and the 7 g weight keeps the assembly balanced.
Compatibility and Requirements
The LN009 fits M12 screw-mount holders and is listed as compatible with the Arducam B0031 and B0103 boards as well as other M12 boards. It is not directly compatible with the official Raspberry Pi Camera Module V2 unless that module is fitted with an M12 lens holder. A lens holder is not included, so check that your camera board already has an M12 mount before ordering. Focus is set manually by turning the lens in its holder.
Typical Uses
- Robotics and mobile platforms that need a wide awareness view
- VR and panoramic capture setups
- Surveillance and monitoring prototypes
- Maker projects replacing a narrow stock lens with a wider option
What's in the Box
1 x Arducam LN009 1/3" M12 Mount 1.71mm Focal Length Camera Lens M30171H16.

Quick specs
- Item Type
- Camera Lens
- Lens Mount
- M12 screw mount
- Optical Format
- 1/3"
- Field of View (FOV)
- 184° (Diagonal)
- IR Sensitivity
- With 650nm IR-cut filter
- Compatibility
- Arducam B0031, Arducam B0103, M12 boards

















