
At a glance
Made by Arducam, this power adapters and cable is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Camera Cable; item type Kit; cable type LAN/Ethernet cable.
Key Highlights
- Model No. / Name: Camera Cable
- Item Type: Kit
- Cable Type: LAN/Ethernet cable
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Read the full specifications and the package contents list below to make sure it does what you need.
Specifications
| Model No. / Name | Camera Cable |
|---|---|
| Item Type | Kit |
| Cable Type | LAN/Ethernet cable |
| Product Range | 15m |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 10 × 7 × 4 cm |
Overview
The Arducam U6248 Cable Extension Kit for Raspberry Pi Camera, Up to 15-Meter Extension, Compatible with Raspberry Pi Camera, made by Arducam, is listed in our power adapters and cable range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Camera Cable (resolution is one factor; lens and lighting matter as much)
- Item Type: Kit
- Cable Type: LAN/Ethernet cable
- Product Range: 15m (quoted range is usually line-of-sight; walls and interference shorten it)
- Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 10 × 7 × 4 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
This extension cable is a kit for the Raspberry Pi that replaces the CSI cable (Camera Serial Interface) with a LAN/Ethernet cable. This allows you to significantly increase the length of cable available and place the camera module up to 15 meters away from the Raspberry Pi. The kit is divided into two parts: the Transmitter Board (Tx board) which is connected to your Raspberry Pi camera module/HQ camera; and the Receiver Board (Rx) which is connected to the Raspberry Pi via the GPIO row of pins.
Assembly Instructions:
- Plug the Rx board into the Raspberry Pi board;
- Plug the Tx board into the Raspberry Pi camera;
- Connect the Rx and Tx boards with a network cable.
Features:
- Designed for Raspberry Pi: This extension cable kit is designed for Raspberry Pi and Raspberry Pi cameras. The purpose is to keep your camera long away from the Raspberry Pi. This way you can get clear and delay-free images no matter where you put your Raspberry Pi.
- Extend up to 15 meters: With just one LAN/Ethernet cable, you can place the camera module up to 15 meters away from the Raspberry Pi.
- Easy to plug and play: Setup is hassle-free and plug&play. There is no need to install any additional software or scripts. Please note that updated drivers are required if working with the Arducam IMX519 16MP AF camera (SKU: 1263925).
- Supported cameras: Raspberry Pi Camera V1, Raspberry Pi Camera V2, Raspberry Pi High Quality (HQ) Camera, and Arducam 16MP autofocus camera. It can work with the synchronized quad-camera kit for a 15-meter connection too.
- Package includes: The kit includes two boards (Rx and Tx board), a 1-meter LAN cable, two 8cm ribbon flex cables for MIPI CSI-2 Transmission and mounting screws.
Package Includes:
1 × The Rx board 1 × Tx board, 1 × 1-meter LAN cable 2 × 8cm ribbon flex cables for MIPI CSI-2 Transmission, 1 × Mounting screws.Quick specs
- Model No. / Name
- Camera Cable
- Item Type
- Kit
- Cable Type
- LAN/Ethernet cable
- Product Range
- 15m
- Shipping Weight
- 0.02 kg
- Shipping Dimensions
- 10 × 7 × 4 cm



















