Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This 8-bit microcontrollers ic is a good fit for everyday home and hobby use. Main specs: manufacturer Generic; frequency rating 16MHz; case/package TQFP 44. Check that your power source supplies 2.7 before connecting it.

Key Highlights

  • Manufacturer: Generic
  • Frequency Rating: 16MHz
  • Case/Package: TQFP 44

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerGeneric
Frequency Rating16MHz
Case/PackageTQFP 44
Min Supply Voltage2.7
Max. Supply Voltage (V)5.5
Product Type8-bit Microcontrollers - MCU
Processor SeriesATmega16A
Mounting TypeSMD/SMT
No. of Timers/Counters3 Timer
No. of I/O pins32
Max. Clock Frequency (MHz)16
Data Bus Width8bit
Interface Type2-Wire, SPI, USART
Program Memory (KB)16
Data RAM size and Type1KB SRAM
Data ROM Size and Type512-B EEPROM
Operating Temperature (°C)-24 to 84
Dimensions (L x W x H) mm10 x 10 x 1
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The ATmega 16A U-TH Microcontroller is listed in our 8-bit microcontrollers ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: Generic
  • Frequency Rating: 16MHz (make sure the rest of your system works at this frequency)
  • Case/Package: TQFP 44
  • Min Supply Voltage: 2.7 (match this to your power supply; too high a voltage can damage the part)
  • Max. Supply Voltage (V): 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Product Type: 8-bit Microcontrollers - MCU (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Processor Series: ATmega16A (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Mounting Type: SMD/SMT

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The ATMEGA16A-AU is a 16-bit low power high-performance CMOS Microcontroller is based on the Atmel AVR enhanced RISC architecture. The device features 16kB self-programming flash program memory, 1024B SRAM, 512-byte EEPROM, 8 channel 10-bit A/D converter and JTAG interface for on-chip-debug. The device achieves 16 MIPS throughput at 16MHz at 2.7 to 5.5V operation.
By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, allowing you to optimize power consumption versus processing speed. The Atmel AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.

  1. Advanced RISC architecture - On-chip 2-cycle multiplier
  2. High endurance, non-volatile memory segments
  3. JTAG (IEEE 1149.1 compliant) interface
  4. Peripheral features - Real-time counter with separate oscillator
  5. Power-on reset (POR) and programmable brown-out detection
  6. Internal Calibrated RC oscillator
  7. External and internal interrupt sources
  8. Six sleep modes - Idle, ADC noise reduction, power-save, power-down, standby and extended standby
  9. 32 Programmable I/O lines
  10. Applications: Industrial, Computers & Computer Peripherals

Package Includes:

1 x ATmega 16A U-TH Microcontroller

Quick specs

Manufacturer
Generic
Frequency Rating
16MHz
Case/Package
TQFP 44
Min Supply Voltage
2.7
Max. Supply Voltage (V)
5.5
Product Type
8-bit Microcontrollers - MCU
See all specifications