
1 / 4 · Click to enlarge
AI Summary
A through-hole 28-pin AVR microcontroller running at up to 16MHz with 8KB flash, 1KB SRAM and 512B EEPROM. Its 23 I/O pins and SPI, TWI and USART interfaces make it easy to wire into breadboard prototypes and small control projects.
Key Highlights
- 8-bit AVR core with up to 16MHz clock and 16 MIPS throughput
- 8KB program memory, 1KB SRAM and 512B EEPROM on chip
- 23 I/O pins across a 28-pin PDIP through-hole package
- SPI, TWI and USART serial interfaces built in
- Three timers and counters for timing and PWM tasks
- Wide 2.7V to 5.5V supply range for 3.3V and 5V systems
Ideal For
- Students learning AVR programming on breadboards
- Makers building sensor and relay control projects
- Engineers prototyping serial and SPI peripherals
- Hobbyists repairing through-hole designs
- Lab technicians assembling test fixtures
Buying Tip
Confirm your programmer and toolchain support the ATmega8A family before ordering, since a programmer is not included with the chip.
Elecvora expert review
Our verdict
A dependable through-hole AVR part that is easy to socket, breadboard and teach with. Its memory and interface mix suit small control tasks well, provided you already own a programmer.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Through-hole PDIP-28 is easy to socket and hand-solder
- 8KB flash with 1KB SRAM and 512B EEPROM covers small projects
- SPI, TWI and USART built in
- Wide 2.7V to 5.5V supply range
- 23 I/O pins give good headroom for peripherals
Cons
- Programmer and toolchain are not included
- No onboard regulator or clock circuitry supplied
- Through-hole size limits use in compact surface-mount designs
Best for
Breadboard prototypes, learning projects and through-hole control boards
Not ideal for
Space-constrained surface-mount products needing fine-pitch parts
Specifications
| Manufacturer | Generic |
|---|---|
| Frequency Rating | 16MHz |
| Case/Package | PDIP 28 |
| Min Supply Voltage | 2.7 |
| Max. Supply Voltage (V) | 5.5 |
| Product Type | 8-bit Microcontrollers - MCU |
| Processor Series | AT89x |
| Max. Clock Frequency (MHz) | 16 |
| Data Bus Width | 8bit |
| Interface Type | SPI, TWI, USART |
| Program Memory (KB) | 8 |
| Data RAM size and Type | 1KB SRAM |
| Data ROM Size and Type | 512-B EEPROM |
| No. of Timers/Counters | 3 Timer |
| Operating Temperature (°C) | -24 to 84 |
| Dimensions (L x W x H) mm | 34.8 x 7.5 x 4.57 |
| Mounting Type | Through Hole |
| No. of I/O pins | 23 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x ATmega8A-U PDIP-28 Microcontroller
Frequently Asked Questions
What supply voltage does the ATmega8A-U need?
Can I program it without a separate programmer?
How much memory is available for my code?
Which communication interfaces does it support?
What is included when I order?
How should I handle and store the chip?
Overview
The ATmega8A-U is an 8-bit microcontroller from the AVR family, packaged in a 28-pin PDIP case with through-hole pins. Because the pins pass through the board and can be soldered or inserted into a socket, the chip is straightforward to fit on breadboards, stripboard and standard prototyping PCBs. It operates at clock frequencies up to 16MHz and delivers throughput approaching 16 MIPS, so simple control loops, timing routines and serial handling run comfortably.
Key Features
- 8-bit data bus with a RISC-style core for compact, efficient instruction handling
- 8KB program memory for firmware, plus 1KB SRAM for runtime variables and 512B EEPROM for settings that must survive power loss
- 23 I/O pins for buttons, sensors, LEDs, relays and displays
- SPI, TWI and USART interfaces for communicating with memory chips, sensors, displays and other microcontrollers
- Three timers and counters for delays, event counting and waveform generation
- 2.7V to 5.5V supply range for flexibility across common logic levels
Specifications Explained
The 16MHz maximum clock sets how fast instructions execute; many projects run the chip at a lower clock to save power. Program memory of 8KB holds the compiled firmware, while the separate 1KB SRAM is working memory and the 512B EEPROM is suited to values such as calibration data or user preferences. The 23 I/O lines are the practical limit on how many external signals you can connect directly, so plan pin use before layout. The PDIP-28 body measures roughly 34.8 x 7.5 x 4.57mm, which fits standard 0.3-inch breadboard spacing. The stated operating temperature range of -24 to 84 degrees Celsius covers typical indoor and sheltered enclosure use.
Compatibility and Requirements
The device needs a supply within 2.7V to 5.5V and a clock source appropriate to your design. Programming requires an external programmer and software toolchain, which are not included. Because the part is through-hole, it suits sockets and hand-soldered boards rather than fine-pitch surface-mount layouts. Decoupling capacitors and a stable supply are recommended for reliable operation, and these are not supplied with the chip.
Typical Uses
This microcontroller fits DIY electronics projects, device controllers that need more than simple logic, multi-interface control boards, sensor readers and serial communication bridges. Its through-hole format makes it a common choice for teaching, lab work and one-off prototypes.
What's in the Box
One ATmega8A-U PDIP-28 microcontroller. Images are for illustration and may differ from the delivered part.
Quick specs
- Manufacturer
- Generic
- Frequency Rating
- 16MHz
- Case/Package
- PDIP 28
- Min Supply Voltage
- 2.7
- Max. Supply Voltage (V)
- 5.5
- Product Type
- 8-bit Microcontrollers - MCU













