Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by BIGTREETECH, this 3d printer extruder parts and fans is a good fit for 3D printing users. Main specs: item type Stepper Motor Driver; compatibility 36/42 stepper motor extruder, Klipper expansion; material Metal, HQ Plastic. Check that your power source supplies 12 to 24 before connecting it.

Key Highlights

  • Item Type: Stepper Motor Driver
  • Compatibility: 36/42 stepper motor extruder, Klipper expansion
  • Material: Metal, HQ Plastic

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeStepper Motor Driver
Compatibility36/42 stepper motor extruder, Klipper expansion
MaterialMetal, HQ Plastic
Input Voltage (VDC)12 to 24
Logic Voltage (V)DC 3.3V
Driveronboard TMC2209
SensorADXL345
Input current9
Maximum Output Current (A)5
USBType-C
ProcessorARM Cortex-M0 STM32F072C8T6 48
Length (mm)45
Width (mm)45
Weight (g)32
ColorBlack PCB
Shipping Weight0.049 kg
Shipping Dimensions10 × 5.5 × 3.5 cm

Overview

The BIGTREETECH BTT EBB42 CAN V1.2 Stepper Motor Driver, made by BIGTREETECH, is listed in our 3d printer extruder parts and fans range and suits 3D printing users. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Stepper Motor Driver
  • Compatibility: 36/42 stepper motor extruder, Klipper expansion
  • Material: Metal, HQ Plastic (affects weight, heat handling and how the part wears)
  • Input Voltage (VDC): 12 to 24 (match this to your power supply; too high a voltage can damage the part)
  • Logic Voltage (V): DC 3.3V (match this to your power supply; too high a voltage can damage the part)
  • Driver: onboard TMC2209
  • Sensor: ADXL345
  • Input current: 9 (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a BIGTREETECH BTT EBB42 CAN V1.2 Stepper Motor Driver is a nozzle adapter board specially designed for a 36 or 42 stepper motor extruder, which is launched by the 3D printing team Shenzhen Big Tree Technology Co., Ltd. BIGTREETECH EBB42 CAN V1.2 can communicate via USB or CAN, which will greatly simplify the wirings. BIGTREETECH BTT EBB42 CAN V1.2 Stepper Motor Driver offer a simple path to an efficient tool head PCB. This include an on-board TMC2209 extruder motor driver and greatly reduce the number of wires (and weight) to your 3D printer's tool head. Note: Actual product may vary in color.

Features:

  1. With BOOT and RESET buttons reserved, users can update the firmware via DFU mode by USB.
  2. Added protection circuit on the thermistor avoids burning the main control chip caused by leakage current from the heating rod.
  3. Users can select the thermistor's pull-up resistor values through a jumper wire, so as to support PT1000 (2.2K pull-up resistors), which makes it convenient for DIY.
  4. Connect the USB with a jumper cap to get it powered on, which effectively isolates the main control board DC-DC from USB 5V.
  5. Reserved I2C interface allows for filament broke and clogged detection, and supports other DIY functions.
  6. Added anti-flyback diodes on the heating rod and fans' ports effectively protect the MOS tube from being burned due to reverse voltage.
  7. Anti-reverse connection protection on the power interface prevents users from burning the motherboard when mistakenly connecting the reverse power line during DIY.
  8. Onboard MAX31865 supports selecting 2-wire or 4-wire of PT100/ PT1000.
  9. Supports communication via CAN or USB. The terminal resistor 120R of CAN can be selected through the jumper cap, and it reserves CAN expansion interfaces.
  10. Equipped ESD protection chip on the USB port prevents the main control board from being broken down by the static electricity of the USB port.
  11.  The adaptor board is equipped with terminals, female reeds, double-way studs and screws, which are required for DIY, greatly meeting the DIY needs of customers.

Package Includes:

1 x BIGTREETECH EBB42 CAN V1.2

1 x Accessories Set (As Shown in Image)

Quick specs

Item Type
Stepper Motor Driver
Compatibility
36/42 stepper motor extruder, Klipper expansion
Material
Metal, HQ Plastic
Input Voltage (VDC)
12 to 24
Logic Voltage (V)
DC 3.3V
Driver
onboard TMC2209
See all specifications