Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact DC motor control trainer with a PMDC motor, 334 PPR encoder, ARM Cortex-M4 controller and three magnetic load disks. It gives you plug-and-play USB logging and ready-made Python PI/PID software for hands-on speed and position control experiments.

Key Highlights

  • PMDC motor paired with a 334 PPR quadrature encoder for precise feedback
  • 32-bit ARM Cortex-M4F controller with integrated USB interface
  • Current-regulated H-bridge driver rated to 3.5 A peak
  • Three hot-swap magnetic load disks for disturbance testing
  • Live RPM and PWM monitoring with timestamped CSV export
  • Python PI/PID software included; no MATLAB required for core work

Ideal For

  • Control engineering students learning PID tuning
  • University laboratory instructors building motor control courses
  • Researchers studying motor dynamics and system identification
  • Electronics hobbyists moving from theory to closed-loop experiments
  • Engineering teams prototyping speed and position control methods

Buying Tip

Confirm your bench has a 230 V AC outlet for the supplied 12 V adapter and a Windows 10 or 11 PC for the USB software before ordering.

Elecvora expert review

Our verdict

The DCMK is a well-integrated teaching platform that turns abstract control theory into measurable bench work. Its encoder feedback, load disks and CSV logging make it genuinely useful for coursework and early research.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Real motor, encoder and driver in one compact enclosure
  • Magnetic load disks make disturbance experiments repeatable
  • Python PI/PID software included with no MATLAB requirement
  • Live RPM and PWM monitoring plus timestamped CSV export

Cons

  • Requires a Windows 10 or 11 computer for the USB software
  • Advanced Simulink methods are optional editions not included here
  • Mains adapter is specified for 230 V AC input

Best for

University control laboratories and engineering students running PID and system identification experiments

Not ideal for

Buyers wanting a ready-made industrial motor drive or a purely simulation-based learning tool

Specifications

Shipping Weight1.528 kg
Shipping Dimensions34 × 22 × 11 cm

What's in the box

  • 1 x CARIMO DC Motor Kit hardware with PMDC motor and quadrature encoder
  • 3 x magnetic load disks (4, 6 and 8 magnets)
  • 1 x 12 V DC power adapter
  • 1 x USB cable
  • Python PI/PID no-code control software

Frequently Asked Questions

What is the CARIMO DCMK used for?
It is a tabletop educational platform for learning and experimenting with DC motor control, including open-loop and closed-loop speed control plus speed and position control in the Python edition.
Does it need MATLAB?
No. The included Python PI/PID software is described as no-code and runs on Windows 10 or 11, so MATLAB is not required for core experiments. Optional Simulink editions are referenced for advanced methods.
What motor and encoder does the kit use?
It uses a permanent-magnet brushed DC motor with a quadrature encoder rated at 334 PPR, equivalent to 1336 CPR, and a maximum speed of around 3200 RPM at full supply.
How is the kit powered?
It runs from the supplied 12 V DC adapter with a 230 V AC mains input. The on-board supply is regulated and protected against thermal and short-circuit conditions.
What is included in the package?
You receive the DC motor kit hardware with PMDC motor and encoder, three magnetic load disks with 4, 6 and 8 magnets, a 12 V DC power adapter, a USB cable and the Python PI/PID control software.
How do the magnetic load disks help?
They are hot-swappable and let you introduce mechanical disturbances, so you can compare no-load and loaded runs and observe how your control settings respond.

Overview

The CARIMO DCMK is a portable bench-top trainer built around a permanent-magnet brushed DC motor. Rather than reading about motor dynamics in a textbook, you drive a real motor, watch its speed respond and log the results. A 334 PPR quadrature encoder feeds position and speed data back to a 32-bit ARM Cortex-M4F controller running at 84 MHz, which commands an integrated H-bridge driver rated to 3.5 A peak. Everything sits in a durable ABS enclosure measuring 265 x 190 x 85 mm and weighing 924 g, so it fits easily on a laboratory desk.

Key Features

  • Closed-loop experimentation: open-loop and closed-loop speed control are both supported, with speed and position control available in the Python edition.
  • Mechanical disturbance testing: three hot-swappable magnetic disks (4, 6 and 8 magnets) let you compare no-load and loaded behaviour.
  • Live monitoring: read RPM and PWM values as the motor runs and export timestamped CSV files for later analysis.
  • Plug-and-play USB: USB 2.0 connectivity works with Windows 10 and 11 without a MATLAB installation for the Python PI/PID workflow.

Specifications Explained

The encoder resolution of 334 pulses per revolution, equivalent to 1336 counts per revolution in quadrature, gives fine-grained feedback for speed and position work. Maximum speed is around 3200 RPM at full supply. The motor driver is current regulated and protected against thermal overload and short circuits, and the on-board supply is regulated, which helps keep experiments repeatable. Power comes from the supplied 12 V DC adapter with a 230 V AC mains input.

Compatibility and Requirements

The kit connects over USB 2.0 to a Windows 10 or Windows 11 computer. The Python PI/PID control software is included and described as no-code, so core experiments do not require MATLAB. Optional Simulink editions are referenced for advanced control methods such as MPC and fuzzy logic, but they are not part of the standard package listed here.

Typical Uses

  • University and college control engineering laboratories
  • System identification and motor dynamics coursework
  • PID tuning exercises with measurable load changes
  • Research prototyping of closed-loop speed and position control

What's in the Box

The package contains the DC motor kit hardware with PMDC motor and quadrature encoder, three magnetic load disks (4, 6 and 8 magnets), a 12 V DC power adapter, a USB cable and the Python PI/PID no-code control software.

Quick specs

Shipping Weight
1.528 kg
Shipping Dimensions
34 × 22 × 11 cm
See all specifications