
1 / 7 · Click to enlarge
AI Summary
A DIY hollow clock kit powered by Arduino Nano and a 28BYJ-48 stepper motor, featuring 3D-printed parts and a minimalist open design. It moves one step per minute for quiet, accurate timekeeping and includes all electronics and a guide.
Key Highlights
- Arduino Nano microcontroller for easy reprogramming
- 28BYJ-48 stepper motor advances once per minute
- 3D-printed hollow frame in orange and white PLA
- Includes battery, clip, driver, magnets, and jumper wires
- Step-by-step manual with code and wiring diagram
- Compact dimensions: 145 mm long, 35 mm wide, 300 g
Ideal For
- Electronics hobbyists learning Arduino
- STEM students and educators
- Makers interested in 3D-printed projects
- Anyone wanting a minimalist desk clock
- DIY enthusiasts looking for a guided build
Buying Tip
Check that you have a computer with the Arduino IDE and a USB port available to upload the code; the kit includes the USB cable.
Elecvora expert review
Our verdict
A well-equipped DIY clock kit that offers a satisfying build and a distinctive finished piece. It is best suited to those with a little patience for assembly and basic Arduino familiarity.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Includes all electronic components and battery
- Clear manual with code and wiring diagram
- Quiet stepper motor operation
- Open design showcases the mechanism
- Reprogrammable for custom projects
Cons
- Requires a computer to upload code
- Motor driver model may vary
- Not a finished product; assembly required
Best for
Makers and students wanting a guided Arduino project
Not ideal for
Those seeking a ready-to-use clock out of the box
Specifications
| Material | PLA. |
|---|---|
| Compatibility | Adaptor 5V 1A |
| Input Voltage | 5-9V |
| Main Body Color | Orange, white |
| Length (mm) | 145 |
| Width (mm) | 35 |
| Weight (g) | 300 |
| Shipping Weight | 0.37 kg |
| Shipping Dimensions | 23 × 9 × 20 cm |
What's in the box
- 1 x 3D Printed Hollow Clock Base & Hand
- 1 x Arduino Nano (with USB cable)
- 1 x 28BYJ-48 Stepper Motor
- 1 x ULN2003 Stepper Motor Driver Module
- 1 x 9V Battery Clip with I Type Connector
- 1 x 9V Battery
- 1 x Mount Bracket for Stepper Motor (3D Printed)
- 1 x Female-to-Female Jumper Wires Set
- 3 x K800 Round Super Circular Magnet
- 1 x User Manual (includes code, wiring diagram, and stepper setup)
Frequently Asked Questions
What power source does the clock use?
Do I need to solder anything?
Can I change the code?
What is included in the box?
Is the motor driver always the same?
How accurate is the clock?
Overview
The Pro-Range DIY Hollow Clock is a kit that lets you assemble a working timepiece from 3D-printed parts and common electronic modules. At its core is an Arduino Nano, which controls a 28BYJ-48 stepper motor to move the clock hand in precise one-step increments each minute. The hollow, open-face design gives the clock a contemporary look that suits desks, shelves, and maker spaces. Because the kit includes the microcontroller, motor driver, battery, and all necessary hardware, you can start building right away. The included manual provides the Arduino code, wiring diagram, and calibration steps, making it a suitable project for anyone with basic electronics curiosity.
Key Features
- Arduino Nano control: The popular Nano board handles timing and motor signals, and can be reprogrammed for custom behaviour.
- Silent stepper movement: The 28BYJ-48 motor turns quietly, so the clock won't disturb quiet rooms.
- Minimalist hollow body: 3D-printed in PLA with an orange and white colour scheme, the open frame puts the mechanism on display.
- Complete hardware set: Includes motor driver, battery clip, 9V battery, magnets, and jumper wires for assembly.
- Guided build: The user manual covers wiring, code upload, and stepper calibration.
Specifications Explained
Material: The body and hand are printed in PLA, a common 3D-printing filament that is rigid and lightweight. Input voltage: The kit accepts 5–9 V; a 9V battery is included, and the clock can also run from a 5V 1A adaptor if you prefer not to use batteries. Dimensions: At 145 mm long and 35 mm wide, with a weight of 300 g, the clock is compact enough for a desk or shelf. Motor: The 28BYJ-48 is a geared stepper motor that provides smooth, low-speed rotation, ideal for minute-hand movement. Driver: The ULN2003 module interfaces the motor with the Arduino. Note that the motor driver type may vary depending on stock, but both variants function identically.
Compatibility and Requirements
The kit is designed around the Arduino Nano and the included 28BYJ-48 motor. It requires a 5–9 V power source; the supplied 9V battery and clip are ready to use, or you can connect a 5V 1A adaptor (not included). No soldering is required for basic assembly, as jumper wires and connectors are provided. To upload or modify the code, you will need a computer with the Arduino IDE and a USB cable (included with the Nano). The kit is not intended for outdoor use or for driving additional motors without modification.
Typical Uses
- Desktop or shelf clock for home or office
- STEM learning project for students and beginners
- Maker portfolio piece or conversation starter
- Platform for experimenting with Arduino code and motion control
What's in the Box
- 1 x 3D Printed Hollow Clock Base & Hand
- 1 x Arduino Nano with USB cable
- 1 x 28BYJ-48 Stepper Motor
- 1 x ULN2003 Stepper Motor Driver Module
- 1 x 9V Battery Clip with I Type Connector
- 1 x 9V Battery
- 1 x Mount Bracket for Stepper Motor (3D Printed)
- 1 x Female-to-Female Jumper Wires Set
- 3 x K800 Round Super Circular Magnet
- 1 x User Manual (includes code, wiring diagram, and stepper setup)
Quick specs
- Material
- PLA.
- Compatibility
- Adaptor 5V 1A
- Input Voltage
- 5-9V
- Main Body Color
- Orange, white
- Length (mm)
- 145
- Width (mm)
- 35



















