Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact DIY kit containing a PCB, photoresistor, two S8050 transistors and resistors for building a light-activated switch. It lets a small LED, buzzer or DC motor turn on automatically when ambient light falls.

Key Highlights

  • Complete parts set for one photosensitive switch circuit
  • 5537 photoresistor responds to changes in ambient light
  • Two S8050 transistors drive small loads such as LEDs and buzzers
  • Compact PCB measures about 20 x 18 mm and weighs 3 g
  • Includes 1K and 100K resistors plus a 4-pin header
  • Suitable for soldering practice and beginner electronics learning

Ideal For

  • Beginners learning soldering and basic circuit assembly
  • Makers building a light-activated LED or buzzer project
  • Students working on photosensor experiments
  • Hobbyists adding a light-sensing switch to a small model
  • DIY enthusiasts who want a compact parts kit for a quick build

Buying Tip

Check that your intended load is a small-current device such as an LED, buzzer or DC motor, and plan for your own soldering tools and power source before buying.

Elecvora expert review

Our verdict

A tidy little parts kit for anyone who wants to build a light-sensitive switch without sourcing each component separately. The limited part count makes it a good first soldering project, though it is strictly for small loads and needs your own tools and power.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Includes all core board components in one pack
  • Compact 20 x 18 mm footprint suits small builds
  • Simple circuit is approachable for beginners
  • Photoresistor and transistors cover basic light-switching tasks

Cons

  • No power supply, wiring or enclosure included
  • Only suitable for small-current loads
  • Requires soldering skills and tools to assemble

Best for

Beginners and makers building a simple light-activated switch

Not ideal for

Users wanting a pre-assembled, ready-to-use module

Specifications

Item TypeKit
Model No. / NameSensor Kit
Length (mm)20
Width (mm)18
Weight (g)3
Shipping Weight0.005 kg
Shipping Dimensions7 × 5 × 1 cm

What's in the box

  • 1 x PCB board
  • 1 x 4-pin pin header
  • 2 x S8050 transistor
  • 1 x 1K resistor
  • 1 x 100K resistor
  • 1 x 5537 photoresistor

Frequently Asked Questions

What does this kit actually do?
It provides the parts to build a photosensitive switch circuit. When ambient light is dark, the circuit can switch on a small load such as an LED, buzzer or DC motor.
What loads can I connect?
The kit is intended for small-current electrical equipment like an LED, buzzer or DC motor. Larger or higher-current devices are outside the stated use.
Is a power supply included?
No. The package contains the PCB, pin header, two S8050 transistors, a 1K resistor, a 100K resistor and a 5537 photoresistor. You need to provide your own power source and wiring.
Do I need to solder it?
Yes. The kit is supplied as loose components and a bare PCB, so assembly requires soldering tools and basic soldering skill.
How big is the board?
The board is approximately 20 mm long and 18 mm wide, with a component weight of about 3 g. Shipping dimensions are 7 x 5 x 1 cm.
What is the 5537 photoresistor for?
It senses ambient light and changes resistance accordingly, which is what allows the circuit to react when it gets dark. It is the light-sensing part of the build.

Overview

The Pro-Range Light Control Sensor Switch Suite is a small DIY project kit built around a photosensitive circuit. Instead of hunting for individual parts, you get the PCB, a 5537 photoresistor, two S8050 transistors, a 1K resistor, a 100K resistor and a 4-pin pin header in one pack. The idea is simple: assemble the board, connect a small load, and let changing light levels control it.

This is a hands-on kit rather than a finished product. It suits anyone who wants to practise reading a simple circuit, identifying component values and soldering through-hole parts onto a board.

Key Features

  • Light-triggered switching: the 5537 photoresistor senses ambient light and forms the input side of the circuit.
  • Small-load driving: two S8050 transistors provide the switching stage for low-current equipment such as an LED, buzzer or DC motor.
  • Ready-to-build parts set: the PCB, resistors and 4-pin header are included, so the main components are matched to the board.
  • Pocket-sized board: at roughly 20 x 18 mm and 3 g, it fits into small enclosures and model builds.
  • Beginner-friendly scope: a limited component count keeps the build short and easy to follow.

Specifications Explained

The 20 mm length and 18 mm width describe the board footprint, which matters if you plan to mount it inside a case or on a model. The 3 g weight keeps the assembly light, so it will not add meaningful load to a small build.

The 5537 photoresistor is the sensing element: its resistance changes with light, and that change is what the circuit reacts to. The two S8050 transistors handle the output switching, while the 1K and 100K resistors set the operating behaviour of the circuit. The 4-pin header gives you a connection point for wiring the board to your load and supply.

Shipping weight is listed at 0.005 kg and shipping dimensions at 7 x 5 x 1 cm, so the kit arrives as a small, flat pack.

Compatibility and Requirements

The kit is intended for small-current electrical equipment only, such as an LED, buzzer or DC motor. It is a component kit, so you will need your own soldering tools, wiring and a suitable power source to complete and test the circuit. No ready-made enclosure, battery or power supply is included.

Typical Uses

  • Automatic night light projects that switch an LED on when the room darkens.
  • Light-triggered buzzers for simple alert or alarm experiments.
  • Small motor or model projects that need a light-dependent start.
  • Classroom and self-study exercises in component identification and soldering.
  • Adding a light-sensing input to a larger DIY build.

What's in the Box

  • 1 x Pro-Range Light Control Sensor Switch Suite Photosensitive Induction DIY Kit, containing:
  • 1 x PCB board
  • 1 x 4-pin pin header
  • 2 x S8050 transistor
  • 1 x 1K resistor
  • 1 x 100K resistor
  • 1 x 5537 photoresistor

Quick specs

Item Type
Kit
Model No. / Name
Sensor Kit
Length (mm)
20
Width (mm)
18
Weight (g)
3
Shipping Weight
0.005 kg
See all specifications