Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A complete DIY kit for building a 250mm FPV racing drone with GOKU F722 Pro V2 flight controller, 55A ESC, MT2204 motors, and FlySky FS-i6S radio. Includes battery, props, VTX, camera, and phone receiver for a ready-to-assemble package.

Key Highlights

  • 250mm carbon fiber frame with 4mm arms for durability
  • GOKU F722 Pro V2 flight controller and 55A BLHeli_32 4-in-1 ESC
  • MT2204 2300KV brushless motors for agile flight
  • HGLRC Zeus Nano 5.8GHz VTX with up to 350mW output
  • FlySky FS-i6S 2.4GHz 10-channel radio system included
  • Complete kit with battery, propellers, camera, and accessories

Ideal For

  • FPV racing pilots building a 250mm quad
  • DIY enthusiasts wanting a complete kit
  • Pilots using FlySky FS-i6S radio
  • Beginners moving to analog FPV

Buying Tip

Check that you have a soldering iron and basic tools, as motors, VTX, camera, and receiver must be soldered to the flight controller.

Elecvora expert review

Our verdict

The Pro-Range DIY Analog FPV Racing Drone Kit offers a well-matched set of components for building a 250mm racing quad. It includes a capable flight stack, motors, and radio system, but requires soldering and Betaflight setup, making it suitable for those with some DIY experience.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Complete kit with frame, electronics, radio, and battery
  • Quality GOKU F722 Pro V2 flight controller and 55A ESC
  • Includes FlySky FS-i6S radio and phone receiver
  • Clear analog video with adjustable VTX power

Cons

  • Requires soldering and Betaflight configuration
  • Battery specifications may vary
  • No goggles included; phone receiver only

Best for

DIY pilots with basic soldering skills who want a complete 250mm FPV racing drone kit.

Not ideal for

Those seeking a ready-to-fly drone or unwilling to solder and configure software.

Specifications

Item TypeFPV Racing Drone Kit
Frame Size (mm)250 mm wheelbase, 4 mm arms
Flight ControllerGOKU F722 Pro V2 (F7 processor)
ESC Type4-in-1 55 A BLHeli_32, 128 kHz
Motor RatingMT2204 2300 KV brushless
Propeller5152 racing propeller
Video TransmitterHGLRC Zeus Nano 5.8 GHz, 25–350 mW, IRC Tramp protocol
Camera Type1/3″ CMOS, 1500 TVL, 2.1 mm lens with OSD
Radio SystemFlySky FS-i6S, 2.4 GHz, AFHDS 2A, 10 channels
Batteries Required3 S (11.1 V) 3300 mAh LiPo Battery
Shipping Weight1.114 kg
Shipping Dimensions30 × 19 × 8 cm

What's in the box

  • 1 x Q250 Carbon Fiber FPV Frame (250mm)
  • 4 x MT2204 2300KV Brushless Motors (2 CW + 2 CCW)
  • 1 x Flywoo GOKU F722 Pro V2 55A 32Bit 128K Stack
  • 1 x HGLRC Zeus Nano VTX (350mW)
  • 1 x 1500TVL Mini FPV Camera (PAL/NTSC)
  • 1 x 5.8G RHCP SMA Lollipop Antenna
  • 1 x 5.8G UVC OTG Android Phone Receiver
  • 1 x 3S 3300mAh LiPo Battery
  • 1 x Pro-Range 5152 Propellers (2 CW + 2 CCW)
  • 2 x 20cm LiPo Battery Straps
  • 1 x 4-in-1 Brush Protection Tube (65mm)
  • 1 x Heat Shrink Sleeve (2mm, black, 1m)
  • 1 x 26 AWG Single Core Teflon Wire (1m)
  • 1 x 3D Printed Camera Holder
  • 1 x SafeConnect Nylon T-Connector Male Connector Pigtail
  • 1 x 2.5mm Allen Key
  • 1 x 2mm Allen Key
  • 1 x User Manual

Frequently Asked Questions

Do I need to solder anything?
Yes, the motors, VTX, camera, and receiver need to be soldered to the flight controller. Basic soldering skills are required.
What battery does the kit include?
The kit includes a 3S 3300mAh LiPo battery, but specifications may vary depending on availability.
Can I use a different transmitter?
The kit is configured for the FlySky FS-i6S, but you can use another transmitter if you adjust calibration and channel mapping in Betaflight according to your radio system.
Is a charger included?
No, a LiPo battery charger is not included. You will need a compatible 3S LiPo charger.
What is the warranty policy?
Warranty applies only to the specific defective parts, not the entire kit.
How do I view the FPV video?
You can use the included 5.8G UVC OTG Android phone receiver with an Android device, or use standard FPV goggles (not included).

Overview

The Pro-Range DIY Analog FPV Racing Drone Kit gives you the core components to assemble a 250mm-class racing quadcopter. Built around a 4mm carbon fiber frame, it pairs a GOKU F722 Pro V2 flight controller with a 55A 4-in-1 BLHeli_32 ESC, four MT2204 2300KV brushless motors, and a 5.8GHz video transmitter. The kit also includes a FlySky FS-i6S 2.4GHz radio system, a 1500TVL CMOS camera, a 3S 3300mAh LiPo battery, and all the necessary propellers, antenna, and wiring accessories. Please note that some components require soldering to the flight controller, and Betaflight configuration is needed before flying.

Key Features

  • Strong carbon fiber frame: 250mm wheelbase with 4mm arms for stability and crash resistance.
  • High-performance flight stack: GOKU F722 Pro V2 flight controller (F7 processor) and 55A BLHeli_32 4-in-1 ESC with 128kHz PWM.
  • Agile power system: MT2204 2300KV brushless motors paired with 5152 racing propellers.
  • Clear FPV video: HGLRC Zeus Nano 5.8GHz VTX (25–350mW, IRC Tramp protocol) and 1/3″ CMOS 1500TVL camera with 2.1mm lens and OSD.
  • Reliable radio control: FlySky FS-i6S 2.4GHz AFHDS 2A transmitter with 10 channels and included receiver.
  • Complete accessory set: Includes battery, props, antenna, phone receiver, straps, tools, and more.

Specifications Explained

The 250mm wheelbase is a common size for 5-inch propeller racing drones, offering a balance of agility and stability. The 4mm carbon fiber arms are thick enough to withstand typical crashes. The GOKU F722 Pro V2 flight controller uses an F7 processor, which provides fast processing for Betaflight firmware. The 55A 4-in-1 ESC can handle the current draw of the MT2204 2300KV motors on 3S power, and BLHeli_32 firmware allows for smooth motor control and configuration. The 5.8GHz VTX offers adjustable power from 25mW to 350mW, letting you choose between lower power for close-range flying or higher power for longer range. The 1500TVL camera delivers a sharp analog image, and the 2.1mm lens gives a wide field of view. The FlySky FS-i6S radio operates on 2.4GHz AFHDS 2A protocol and provides 10 channels, enough for basic quad control plus auxiliary functions. A 3S 3300mAh LiPo battery is included to power the drone.

Compatibility and Requirements

This kit is configured for the included FlySky FS-i6S 2.4GHz transmitter. If you use a different transmitter, you will need to adjust calibration and channel mapping in Betaflight according to your radio system. The included 5.8G UVC OTG Android phone receiver allows you to view FPV video on an Android device, or you can use standard FPV goggles (not included). Some components—motors, VTX, camera, and receiver—must be soldered to the flight controller. A soldering iron and basic tools are required for assembly. The kit includes a 3S 3300mAh LiPo battery, but battery specifications may vary depending on availability. Always verify motor direction, speed, and battery voltage before flying.

Typical Uses

This kit is intended for FPV racing and freestyle flying. Once assembled and configured, it can be used for practice sessions, local races, or recreational flying. The analog video system is suitable for pilots who prefer the low latency and simplicity of analog FPV. The included phone receiver makes it easy to get started without dedicated goggles, though goggles can be added later for a more immersive experience.

What's in the Box

  • 1 x Q250 Carbon Fiber FPV Frame (250mm)
  • 4 x MT2204 2300KV Brushless Motors (2 CW + 2 CCW)
  • 1 x Flywoo GOKU F722 Pro V2 55A 32Bit 128K Stack
  • 1 x HGLRC Zeus Nano VTX (350mW)
  • 1 x 1500TVL Mini FPV Camera (PAL/NTSC)
  • 1 x 5.8G RHCP SMA Lollipop Antenna
  • 1 x 5.8G UVC OTG Android Phone Receiver
  • 1 x 3S 3300mAh LiPo Battery
  • 1 x Pro-Range 5152 Propellers (2 CW + 2 CCW)
  • 2 x 20cm LiPo Battery Straps
  • 1 x 4-in-1 Brush Protection Tube (65mm)
  • 1 x Heat Shrink Sleeve (2mm, black, 1m)
  • 1 x 26 AWG Single Core Teflon Wire (1m)
  • 1 x 3D Printed Camera Holder
  • 1 x SafeConnect Nylon T-Connector Male Connector Pigtail (varies depending on battery)
  • 1 x 2.5mm Allen Key
  • 1 x 2mm Allen Key
  • 1 x User Manual

Quick specs

Item Type
FPV Racing Drone Kit
Frame Size (mm)
250 mm wheelbase, 4 mm arms
Flight Controller
GOKU F722 Pro V2 (F7 processor)
ESC Type
4-in-1 55 A BLHeli_32, 128 kHz
Motor Rating
MT2204 2300 KV brushless
Propeller
5152 racing propeller
See all specifications