
1 / 5 · Click to enlarge
At a glance
This usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Module; operating voltage (v) 5; ic chip CH375B. Check that your power source supplies 5 before connecting it.
Key Highlights
- Model No. / Name: Module
- Operating Voltage (V): 5
- IC Chip: CH375B
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Module |
|---|---|
| Operating Voltage (V) | 5 |
| IC Chip | CH375B |
| Output Frequency | 12 MHz |
| PCB Size ( L x W ) mm | 48 x 28 |
| Weight (g) | 6 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 7 × 5 × 2 cm |
Overview
The CH375B USB Disk Read-write Module USB Flash Disk For Arduino is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Module
- Operating Voltage (V): 5 (match this to your power supply; too high a voltage can damage the part)
- IC Chip: CH375B
- Output Frequency: 12 MHz (make sure the rest of your system works at this frequency)
- PCB Size ( L x W ) mm: 48 x 28 (measure your mounting space before ordering)
- Weight (g): 6 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 7 × 5 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
CH375 USB device mode is fully compatible with CH372, CH375 contains all the features of the CH372. Common CH375 USB host mode support USB full-speed device, the external microcontroller can through the CH375 in accordance with the USB protocol and USB device communication. CH375 firmware also built a dedicated protocol processing Mass-Storage mass storage devices, the external microcontroller can be directly used as the basic unit of reading and writing in sectors USB storage devices (including USB hard disk/USB flash drive/U disk).
CH375 with the 8-bit data bus and read, write, chip select control lines and interrupt output can be easily attached to the system bus of the microcontroller/DSP/MCU/MPU controller. USB host mode, CH375 also provides serial communication via serial input, serial output, and interrupt output monolithic/DSP/MCU/MPU connected.
Specifications and Features :
- CH375B with the 8-bit data bus and read, write, chip select control lines and interrupt output can be easily attached to the system bus of the microcontroller/DSP/MCU/MPU controller.
- USB host mode, CH375B provides serial communication via serial input, serial output, and interrupt output monolithic/DSP/MCU/MPU connected.
- 2x8 connector, easy with the MCU mount.
- Jumper selectable can work in parallel or serial mode.
- USB status indicator.
- On board 3.3 V LDO 1117, provides 800 mA current.
- Colour: Blue
Useful Links
Tutorial for Interfacing USB Mouse to your Arduino using CH375B
Package includes :
1 x CH375B USB Disk Read-write Module USB Flash Disk For ArduinoQuick specs
- Model No. / Name
- Module
- Operating Voltage (V)
- 5
- IC Chip
- CH375B
- Output Frequency
- 12 MHz
- PCB Size ( L x W ) mm
- 48 x 28
- Weight (g)
- 6
Explore more
Frequently Bought Together

Arduino Uno R3 with Cable
$9.99
Uno R3 Board without Cable compatible with Arduino
$9.99
MB102 830 Points Solderless Prototype PCB Breadboard High Quality
$6.99
GL-12 840 Points Solderless Breadboard
$6.99
30pcs Flexible Breadboard Jumper Wires
$6.99
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
$7.99












