Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A heavy duty CNTD limit switch with a vertical roller lever, 1NO plus 1NC contacts and a 6A 250V AC rating. Its IP65 housing keeps it working reliably in dusty and damp industrial settings.

Key Highlights

  • Vertical roller lever actuator for smooth, precise mechanical actuation
  • 1NO plus 1NC contact configuration for flexible switching circuits
  • 6A at 250V AC rating suits common industrial control loads
  • IP65 housing resists dust and water in harsh environments
  • Rated electrical life of 300,000 operations or more
  • Compact industrial housing for straightforward mounting

Ideal For

  • Maintenance engineers servicing conveyors and packaging lines
  • Automation integrators building machine control panels
  • Elevator and lift technicians needing position sensing
  • Plant electricians replacing worn limit switches
  • Safety interlock installers working on machine guards

Buying Tip

Check that your actuator travel and mounting holes line up with the vertical roller lever before ordering, and keep the switched load within 6A at 250V AC.

Elecvora expert review

Our verdict

A dependable, compact limit switch for routine industrial position and interlock duties. The roller lever and IP65 housing make it a sensible spare to keep on the shelf for conveyor and packaging equipment.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • IP65 housing handles dusty and damp areas
  • 1NO plus 1NC contacts simplify interlock wiring
  • Long rated electrical life of 300,000 operations
  • Compact body fits tight machine spaces

Cons

  • Rated at 6A 250V AC, so not for heavy power switching
  • No cable or connector included
  • Requires careful lever alignment during installation

Best for

Conveyors, packaging lines and machine position sensing

Not ideal for

High-current power circuits or outdoor submersion

Specifications

ManufacturerCNTD
Voltage Rating (V)250
Current Rating (A)6
Model No. / NameCLS 331M
Contact Configuration1NO+1NC
Shipping Weight0.03 kg
Shipping Dimensions5 × 3 × 2 cm

What's in the box

  • 1 x CNTD CLS-331M 250V AC Vertical Roller Lever Limit Switch, IP65, 1NO plus 1NC

Frequently Asked Questions

What contact configuration does this limit switch have?
It has one normally open and one normally closed contact, giving you both circuits in a single switch body.
What voltage and current can it switch?
The switch is rated for 6A at 250V AC. Keep your control circuit within those limits.
Is it suitable for dusty or wet environments?
Yes. The IP65 housing protects against dust ingress and water jets, which suits many industrial production areas.
What is included in the package?
The package contains one CNTD CLS-331M limit switch. Cable, connectors and mounting hardware are not listed.
What temperature range does it operate in?
It is rated for use from -20 to +70 degrees Celsius, provided there is no icing.
How long is the electrical life?
The electrical life is rated at 300,000 operations or more under the stated conditions.

Overview

The CNTD CLS-331M is a heavy duty industrial limit switch designed for position detection and mechanical control in demanding environments. A vertical roller lever actuator converts machine movement into a clean switching action, while the 1NO plus 1NC contact set gives you one normally open and one normally closed circuit in a single device. With a 6A 250V AC rating and IP65 protection, it is a practical choice for equipment that runs in dusty, damp or busy production areas.

Key Features

  • Vertical roller lever actuator: follows cams, stops and moving machine parts for repeatable actuation.
  • 1NO plus 1NC contacts: supports separate signal and interlock circuits from one switch body.
  • 6A 250V AC rating: matches many industrial control and signalling loads.
  • IP65 protection: sealed against dust ingress and water jets for tougher locations.
  • Long service life: electrical life rated at 300,000 operations or more.
  • Wide operating range: works from -20 to +70 degrees Celsius with humidity below 95 percent RH.

Specifications Explained

The 6A 250V AC rating tells you the switch is intended for control circuits rather than heavy power switching, so it fits relays, contactors, PLC inputs and interlock wiring. The 1NO plus 1NC arrangement means the switch can open one circuit while closing another, which is useful for confirming a position and cutting a drive at the same time. IP65 means the enclosure is protected against dust and against water projected from a nozzle, making it suitable for washdown-adjacent or dirty areas. Contact resistance is 25 milliohms maximum at initial value, and insulation resistance is 100 megohms minimum below 500VDC. Operation speed runs from 5mm to 0.5m per second, with an electrical operating frequency of 30 operations per minute.

Compatibility and Requirements

The switch is wired into your existing control circuit and requires compatible mounting and lever alignment with the moving machine part. It is rated for 250V AC and 6A, so confirm your circuit stays within those limits. No connector or cable is supplied, and installation should follow the wiring diagram and local electrical safety rules.

Typical Uses

Common applications include conveyor end stops, elevator position sensing, packaging line gates, machine guards and safety interlocks, and general automation equipment that needs reliable end-of-travel detection.

What's in the Box

One CNTD CLS-331M 250V AC vertical roller lever limit switch with IP65 housing and 1NO plus 1NC contacts.

Quick specs

Manufacturer
CNTD
Voltage Rating (V)
250
Current Rating (A)
6
Model No. / Name
CLS 331M
Contact Configuration
1NO+1NC
Shipping Weight
0.03 kg
See all specifications