
1 / 3 · Click to enlarge
AI Summary
A compact 15A 250V AC limit switch with a flat plunger actuator and 1NO plus 1NC contacts for position sensing and control. It handles repetitive linear motion with an operating speed range of 0.05 mm to 1 m/s and a long electrical life.
Key Highlights
- Flat plunger actuator for smooth, precise linear motion detection
- 1NO plus 1NC contact configuration for versatile switching
- 15A at 250V AC rating suits medium to heavy loads
- Operating speed range of 0.05 mm to 1 m/s
- Electrical life of 500,000 operations or more
- Compact body measuring roughly 5 x 3 x 2 cm
Ideal For
- Machine builders specifying position and end-of-travel switches
- Maintenance technicians replacing worn limit switches on conveyors
- Automation integrators wiring safety interlocks and control panels
- Packaging and elevator equipment service engineers
- Makers building heavy-duty electromechanical control projects
Buying Tip
Check that your circuit's voltage and current stay within 250V AC and 15A, and confirm the flat plunger travel matches the point where you need actuation before ordering.
Elecvora expert review
Our verdict
The CM-1306 is a straightforward, well-rated plunger switch that covers a lot of industrial sensing jobs without fuss. Its 15A rating and 1NO plus 1NC contacts make it flexible enough for both signalling and direct load switching.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 15A 250V AC rating handles meaningful loads
- 1NO plus 1NC contacts in a single compact body
- Long electrical life of 500,000 operations or more
- Wide operating speed range for plunger actuation
Cons
- Mounting hardware and connectors are not included
- Not a sealed type, so general-purpose humidity limits apply
- Actuation point depends on careful mechanical alignment
Best for
Conveyors, lifts and packaging machinery needing reliable position detection
Not ideal for
Wet or washdown environments where a sealed switch is required
Specifications
| Manufacturer | CNTD |
|---|---|
| Model No. / Name | CM 1306 |
| Voltage Rating (V) | 250 |
| Current Rating (A) | 15 |
| Contact Configuration | 1NO+1NC |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 3 × 2 cm |
What's in the box
- 1 x CNTD CM-1306 15A 250V AC flat plunger limit switch (1NO+1NC)
Frequently Asked Questions
What does 1NO + 1NC mean on this switch?
Can it switch a 15A load directly?
Does it need its own power supply?
What is included in the package?
How fast can the plunger be actuated?
What temperature range can it handle?
Overview
The CNTD CM-1306 is a flat plunger limit switch from CNTD's microswitch range. It detects linear movement mechanically and converts it into an electrical switching action, making it a practical choice for position sensing, end-of-travel detection and safety interlocks on industrial equipment. The flat plunger design keeps actuation consistent when the same point is pressed repeatedly.
Inside the housing is a single-pole double-throw contact set: one normally open (NO) and one normally closed (NC) contact. That arrangement lets a single switch both start a function and interrupt another circuit, which simplifies wiring in control panels and safety chains.
Key Features
- Flat plunger actuator for smooth, repeatable operation under repetitive mechanical movement
- 1NO + 1NC contacts giving both a make and a break circuit from one device
- 15A at 250V AC rating for medium to heavy electrical loads
- Wide operating speed range from 0.05 mm to 1 m/s for plunger-type actuation
- Electrical life of 500,000 operations or more for long service intervals
- Compact footprint of about 5 x 3 x 2 cm and a shipping weight of roughly 0.01 kg
Specifications Explained
The 15A, 250V AC rating tells you this switch is intended for real load switching, not just low-current logic signals. It can sit directly in a control circuit carrying meaningful current, which reduces the need for a separate contactor in lighter-duty applications.
The 1NO + 1NC configuration means the switch has two output states that change together when the plunger is pressed. In a typical setup the NC contact can hold a circuit closed until the actuator is struck, while the NO contact closes at the same moment.
Contact resistance is specified at 15 mΩ maximum as an initial value, and insulation resistance at 100 mΩ minimum below 500 VDC. Operation speed for the plunger type spans 0.05 mm to 1 m/s, and electrical operation frequency is rated at 20 operations per minute. The switch is intended for ambient temperatures from -20 to +80 degrees Celsius with no icing, and general-purpose humidity up to 85% RH.
Compatibility and Requirements
This is a passive mechanical switch, so it needs no power supply of its own. It must be wired into a circuit that matches its 250V AC, 15A rating, and the installer should confirm that the load current and voltage stay within those figures. The 1NO + 1NC contacts can be connected to relay coils, PLC inputs, contactors or direct loads as the application requires. Mounting hardware and electrical connectors are not listed in the package contents, so plan for those separately.
Typical Uses
- End-of-travel and position detection on conveyors
- Door and level sensing in elevator and lift systems
- Stop and index points on packaging machinery
- Safety interlocks and machine guarding circuits
- General automation where a robust plunger switch is needed
What's in the Box
1 x CNTD CM-1306 15A 250V AC flat plunger limit switch with 1NO + 1NC contacts.
Quick specs
- Manufacturer
- CNTD
- Model No. / Name
- CM 1306
- Voltage Rating (V)
- 250
- Current Rating (A)
- 15
- Contact Configuration
- 1NO+1NC
- Shipping Weight
- 0.01 kg



















