
1 / 3 · Click to enlarge
AI Summary
The CNTD CWLD2 is a 6A 250V vertical roller plunger limit switch with 1NO+1NC contacts and an IP66 aluminium die-cast body. Its roller actuator and double-circuit contact block make repeatable position sensing and safety interlocking straightforward in machinery and automation systems.
Key Highlights
- Vertical roller plunger lever actuator for linear movement detection
- 1NO+1NC double-circuit contacts from a single switch body
- 6A at 250V rating for medium electrical loads
- IP66 waterproof and oil-proof aluminium die-cast construction
- Electrical life of 500,000 operations or more
- Operates from -20 to +80 degrees Celsius without icing
Ideal For
- Machine builders specifying end-of-travel position sensing
- Maintenance engineers replacing worn limit switches on production lines
- Automation integrators needing a hard-wired 1NO+1NC position signal
- Plant technicians fitting guard and door safety interlocks
- Equipment designers working in oily or washdown environments
Buying Tip
Check that your moving part meets the roller plunger within its stroke and that the switched load stays within 6A at 250V before ordering.
Elecvora expert review
Our verdict
A solid, straightforward industrial limit switch: the roller plunger, 1NO+1NC contacts and IP66 aluminium body cover most position-sensing jobs without extra parts. It is a sensible pick when you need a durable mechanical switch rather than a proximity sensor.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Double-circuit 1NO+1NC contacts in one body
- IP66 waterproof and oil-proof housing
- Long 500,000-operation electrical life
- Wide -20 to +80 degrees Celsius working range
Cons
- Mechanical actuation requires physical contact with the moving part
- Load must stay within the 6A 250V rating
- No mounting hardware or cable is listed in the package
Best for
Position detection and safety interlocking in machinery and automation
Not ideal for
High-current loads or non-contact sensing applications
Specifications
| Manufacturer | CNTD |
|---|---|
| Voltage Rating (V) | 250 |
| Current Rating (A) | 6 |
| Model No. / Name | CWLD2 |
| Contact Configuration | 1NO+1NC |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 3 × 2 cm |
What's in the box
- 1 x CNTD CWLD2 6A 250V Vertical Roller Plunger Lever Limit Switch (1NO+1NC)
Frequently Asked Questions
What does 1NO+1NC mean on this switch?
Can I switch a load directly with this switch?
Does the switch need its own power supply?
Is it suitable for wet or oily environments?
What is included in the package?
How should I maintain it?
Overview
The CNTD CWLD2 is a vertical roller plunger lever limit switch for detecting position and controlling motion in industrial machinery. A roller-tipped plunger is pressed by a moving part, and the internal contact block changes state to signal or switch the circuit. Because the switch carries both a normally open (NO) and a normally closed (NC) contact, one device can serve two control functions at once.
The housing is made mainly of aluminium die-cast for mechanical strength, with a waterproof and oil-proof design rated to IP66. That makes the switch a practical choice where coolant, oil mist or washdown spray are part of daily operation.
Key Features
- Vertical roller plunger lever: follows linear or guided movement for repeatable position detection.
- 1NO+1NC contacts: double-circuit control from one actuator.
- 6A 250V rating: switches medium electrical loads directly.
- IP66 protection: sealed against dust and water jets, and resistant to oil.
- Double-spring contact mechanism: contributes to an electrical life of 500,000 operations or more.
- Wide ambient range: rated for use from -20 to +80 degrees Celsius with no icing.
Specifications Explained
Electrical ratings
The 6A and 250V ratings define the load the contacts are designed to switch. Contact resistance is 25 milliohms maximum at initial value, and insulation resistance is at least 100 megohms below 500VDC, both useful indicators of a clean, low-loss contact path.
Actuation and speed
The switch is rated for operation speeds from 1mm to 1m per second, and for up to 30 electrical operations per minute. Match your machine's travel speed and switching frequency to these figures rather than exceeding them.
Environment and durability
IP66 sealing, a -20 to +80 degrees Celsius working range and humidity below 95% RH cover most workshop and plant conditions. Vibration tolerance is 10-55Hz at 1.5mm double amplitude.
Compatibility and Requirements
The CWLD2 is a standalone mechanical switch, so it needs no separate power supply of its own. Wire the NO and NC contacts into your control circuit according to your 250V-rated design, and confirm that the switched load stays within the 6A rating. The roller plunger must be positioned so the moving part strikes it within its travel. For full technical detail, refer to the datasheet in the attachments.
Typical Uses
- End-of-travel and position detection on machine tools and production equipment
- Automation systems that need a simple, hard-wired position signal
- Safety interlocking of guards, doors and moving covers
- Detecting linear or guided movement on conveyors and slides
What's in the Box
1 x CNTD CWLD2 6A 250V vertical roller plunger lever limit switch with 1NO+1NC contacts.
Quick specs
- Manufacturer
- CNTD
- Voltage Rating (V)
- 250
- Current Rating (A)
- 6
- Model No. / Name
- CWLD2
- Contact Configuration
- 1NO+1NC
- Shipping Weight
- 0.01 kg



















