Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 10A 250V limit switch with a long straight hinge lever and 1NO+1NC contacts for reliable position sensing. Its reinforced plastic housing resists water and oil, making it a durable choice for automated machinery and interlocks.

Key Highlights

  • Long straight hinge lever for smooth, accurate actuation travel
  • 1NO+1NC contact configuration supports flexible control wiring
  • 10A at 250V rating for moderate industrial electrical loads
  • Reinforced plastic shell resists water and oil ingress
  • Rated for 500,000 electrical operations
  • Low 25mΩ maximum initial contact resistance

Ideal For

  • Machine builders specifying end-of-travel sensing
  • Maintenance technicians replacing worn limit switches
  • Automation engineers wiring interlocks and position logic
  • Conveyor and packaging equipment integrators
  • DIY robotics and motion-control hobbyists

Buying Tip

Confirm your circuit's voltage and current stay within the 250V and 10A ratings, and check that the long straight lever's travel suits your mounting position before ordering.

Elecvora expert review

Our verdict

The CNTD CZ-7120 is a straightforward, well-specified limit switch for moderate industrial loads, with the dual 1NO+1NC contacts adding useful wiring flexibility. Its reinforced plastic housing and 500,000-operation rating make it a sensible choice for routine position sensing.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual 1NO+1NC contacts for flexible control wiring
  • 10A 250V rating suits moderate loads
  • Long straight hinge lever for smooth travel
  • Water- and oil-resistant reinforced plastic housing
  • Rated for 500,000 electrical operations

Cons

  • Wiring and mounting hardware are not included
  • Not intended for loads above its 250V or 10A ratings
  • Operating temperature limited to -20 to +70°C

Best for

Position sensing and interlocks in conveyors, packaging machines and elevators

Not ideal for

High-power or high-voltage switching beyond 250V and 10A

Specifications

ManufacturerCNTD
Model No. / NameCZ 7120
Voltage Rating (V)250
Current Rating (A)10
Contact Configuration1NO+1NC
Shipping Weight0.01 kg
Shipping Dimensions5 × 3 × 2 cm

What's in the box

  • 1 x CNTD CZ-7120 10A 250V Long Straight Hinge Lever Limit Switch (1NO+1NC)

Frequently Asked Questions

What does 1NO+1NC mean on this switch?
It has one normally open and one normally closed contact set, so a single switch can close one circuit while opening another for control or interlock logic.
What voltage and current can it handle?
The switch is rated at 250V and 10A for moderate electrical loads. Keep your circuit within these ratings.
What is included in the package?
The package contains one CNTD CZ-7120 limit switch. Cable and mounting hardware are not listed as included.
What environmental conditions does it suit?
It operates from -20 to +70°C without icing and in humidity below 95% RH, with a water- and oil-resistant plastic housing.
How long is the switch expected to last?
The electrical life is rated at 500,000 operations, and contact resistance is 25mΩ maximum at initial value.
How fast can it be actuated?
Operation speed is rated from 0.05mm to 0.5m/s, with up to 20 electrical operations per minute.

Overview

The CNTD CZ-7120 is a mechanical limit switch designed for position detection and end-of-travel control in automated equipment. A long straight hinge lever drives the actuator, giving smooth operation over extended travel and helping reduce wear during repeated actuation. The switch provides a 1NO+1NC contact arrangement, so both a normally open and a normally closed circuit are available from one unit.

Rated at 10A and 250V, it is suited to moderate electrical loads in conveyors, packaging machines, elevators and similar machinery. The reinforced plastic housing is built to resist water and oil, and the switch is rated for 500,000 electrical operations.

Key Features

  • Long straight hinge lever: smooth, accurate mechanical operation over extended travel.
  • 1NO+1NC contacts: versatile wiring for control, signalling and interlock circuits.
  • 10A 250V rating: consistent switching of moderate loads.
  • Reinforced plastic shell: water- and oil-resistant construction.
  • Long service life: 500,000 electrical operations rated.

Specifications Explained

Voltage and current

The 250V and 10A ratings define the electrical load the contacts are intended to switch. Match these to your circuit so the switch is not asked to carry more than it is rated for.

Contact configuration

1NO+1NC means one normally open and one normally closed contact set. This lets the same switch trigger an action while also opening or closing a separate circuit, which is useful for control logic and safety interlocks.

Contact and insulation resistance

Contact resistance is 25mΩ maximum at initial value, and insulation resistance is 100MΩ minimum below 500VDC. These figures describe the electrical quality of the switching path.

Environmental limits

The switch operates from -20 to +70°C without icing and in humidity below 95% RH. Mechanical operation is rated for speeds from 0.05mm to 0.5m/s and up to 20 electrical operations per minute.

Compatibility and Requirements

Use the switch within its 250V and 10A ratings and within the stated temperature and humidity ranges. Wiring is required to connect the 1NO and 1NC contacts to your control circuit; no cable or mounting hardware is listed in the package contents.

Typical Uses

  • End-of-travel and position sensing on conveyors
  • Packaging machine control and sequencing
  • Elevator and lift position detection
  • Safety interlocks and automated process control

What's in the Box

1 x CNTD CZ-7120 10A 250V Long Straight Hinge Lever Limit Switch (1NO+1NC).

Quick specs

Manufacturer
CNTD
Model No. / Name
CZ 7120
Voltage Rating (V)
250
Current Rating (A)
10
Contact Configuration
1NO+1NC
Shipping Weight
0.01 kg
See all specifications