Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 6A 250V limit switch with a vertical spring lever rod actuator and one normally open plus one normally closed contact. Its IP65 housing and double-spring contact block make position detection reliable on conveyors, machine tools and automation equipment.

Key Highlights

  • Vertical spring lever rod actuator for linear and guided movement
  • 1NO plus 1NC double-circuit contact configuration
  • 6A at 250V rating for light to medium electrical loads
  • IP65 protection against dust and water ingress
  • Double-spring contact block for long mechanical life
  • Compact intensive plastic and die-cast aluminium housing

Ideal For

  • Industrial automation technicians building position sensing circuits
  • Machine tool and conveyor maintenance teams
  • Panel builders wiring interlock and end-stop circuits
  • Equipment designers needing a compact double-circuit switch
  • Maintenance engineers replacing worn limit switches

Buying Tip

Check that your circuit stays within 6A at 250V and that the rod can meet the moving part without over-travelling the actuator.

Elecvora expert review

Our verdict

A practical, well-sealed limit switch for light to medium control duties, with the convenience of two contacts in one compact body. It suits machine builders who need dependable position signalling without a large enclosure.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 1NO and 1NC contacts in a single unit
  • IP65 housing for dusty or damp environments
  • Long electrical life rating of 500,000 operations
  • Compact die-cast aluminium and plastic body
  • Smooth vertical spring lever rod actuation

Cons

  • Rated only 6A at 250V, so not for heavy loads
  • No cable or mounting hardware included
  • Actuation point must be set carefully to avoid over-travel

Best for

Conveyors, machine tools and automation equipment needing compact position detection

Not ideal for

High-current power switching or outdoor installations without extra protection

Specifications

ManufacturerCNTD
Voltage Rating (V)250
Current Rating (A)6
Model No. / NameTZ 8168
Contact Configuration1NO+1NC
Shipping Weight0.01 kg
Shipping Dimensions5 × 3 × 2 cm

What's in the box

  • 1 x CNTD TZ-8168 6A 250V Vertical Spring Lever Rod Limit Switch (1NO+1NC)

Frequently Asked Questions

What contact configuration does this switch have?
It has one normally open and one normally closed contact, giving you two switching options from a single unit.
What voltage and current can it handle?
The switch is rated for 250V and 6A, which suits control circuits and light to medium electrical loads.
Is the switch protected against dust and water?
Yes, it carries an IP65 protection rating, so it is sealed against dust and water splashes.
What is included with the switch?
The package contains one CNTD TZ-8168 limit switch. Cable and mounting hardware are not included.
What temperature range does it work in?
It operates from -20 to +80 degrees Celsius with no icing, and humidity should remain below 95% RH.
How is the switch actuated?
A vertical spring lever rod is deflected by the moving machine part, which changes the contact state inside the housing.

Overview

The CNTD TZ-8168 is a vertical spring lever rod limit switch designed to report the position of moving machine parts to a control circuit. When the rod is deflected by a passing cam, carriage or gate, the internal contact block changes state, sending a signal to your controller, relay or interlock. Because the switch carries both a normally open and a normally closed contact, one device can handle two switching duties at once.

The housing combines intensive plastic with die-cast aluminium, giving a small footprint without sacrificing mechanical strength. The conduit design keeps wiring tidy and protected, which matters on equipment that sees regular movement and vibration.

Key Features

  • Double-circuit contacts: one normally open and one normally closed contact in the same body.
  • Vertical spring lever rod: smooth actuation with generous over-travel for linear or guided mechanisms.
  • Sealed construction: IP65 protection helps keep out dust and water splashes.
  • Long service life: the double-spring contact box is rated for 500,000 electrical operations or more.
  • Stable switching: contact resistance of 25 milliohms maximum at initial value.
  • Conduit-ready wiring: a practical entry layout for machine and panel installs.

Specifications Explained

The 6A 250V rating defines the load the contacts are intended to switch. It is well suited to control circuits, relays, indicators and small motors rather than heavy power circuits. The 1NO plus 1NC arrangement means the switch can close one circuit while opening another, useful for signalling both an engaged and a released state.

Operation speed of 1 mm to 1 m per second and an electrical operating frequency of 30 operations per minute set the pace the switch is comfortable with. Insulation resistance is 100 megohms minimum below 500 VDC, and the unit tolerates vibration of 10 to 55 Hz at 1.5 mm double amplitude. The ambient working range is -20 to +80 degrees Celsius with no icing, and humidity should stay below 95% RH.

Compatibility and Requirements

The switch is intended for circuits up to 250V and 6A. It needs to be mounted so the vertical spring lever rod meets the moving part at the right point in its travel, and wiring must be routed through the conduit entry. No controller, cable or mounting hardware is included, so plan those separately for your installation.

Typical Uses

Common applications include conveyor position sensing, machine tool end stops, automation systems, gate and guard monitoring, and safety interlock circuits. It also works well wherever a compact switch must detect a linear or guided mechanical movement.

What's in the Box

One CNTD TZ-8168 6A 250V vertical spring lever rod limit switch with 1NO plus 1NC contacts.

Quick specs

Manufacturer
CNTD
Voltage Rating (V)
250
Current Rating (A)
6
Model No. / Name
TZ 8168
Contact Configuration
1NO+1NC
Shipping Weight
0.01 kg
See all specifications