
1 / 8 · Click to enlarge
At a glance
Made by CUAV, this drone gps gnss modules and antennas is a good fit for makers, students and electronics hobbyists. Main specs: item type GNSS Module; processor STM32F4; module type All-constellation Multi-frequency.
Key Highlights
- Item Type: GNSS Module
- Processor: STM32F4
- Module Type: All-constellation Multi-frequency
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | GNSS Module |
|---|---|
| Processor | STM32F4 |
| Module Type | All-constellation Multi-frequency |
| Channels | 1408 |
| GNSS | BDS/GPS/GLONASS/Galileo/QZSS |
| Length (mm) | 50 |
| Width (mm) | 37 |
| Weight (g) | 40 |
| Shipping Weight | 0.12 kg |
| Shipping Dimensions | 10 × 7 × 5 cm |
Overview
The CUAV C-RTK 2 HP GNSS Heading Module, made by CUAV, is listed in our drone gps gnss modules and antennas range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: GNSS Module
- Processor: STM32F4 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Module Type: All-constellation Multi-frequency (make sure the rest of your system works at this frequency)
- Channels: 1408
- GNSS: BDS/GPS/GLONASS/Galileo/QZSS
- Length (mm): 50 (measure your mounting space before ordering)
- Width (mm): 37 (measure your mounting space before ordering)
- Weight (g): 40 (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
It's CUAV C-RTK 2 HP GNSS Heading Module from CUAV! The module utilizes multiple satellite constellations, such as GPS, GLONASS, Beidou, and Galileo, to provide high-precision positioning down to the centimeter level. This level of accuracy is crucial for applications like drone navigation, where precise location data is essential. The dual-antenna configuration helps in determining not only the position but also the heading or orientation of the device. This is particularly valuable for applications like precision agriculture, where the orientation of equipment matters.
Many GNSS modules, including the CUAV New C-RTK 2HP, incorporate an IMU for measuring changes in orientation and velocity. This enhances the performance in dynamic and challenging environments. The module is designed to operate in various environmental conditions, including extreme temperatures and humidity levels.
Note: Refer to Interface Design in the ATTACHMENTS section for more info.


Features:
- Centimeter-Level Positioning
- Single Module Dual Antenna Estimate yaw
- All-constellation Multi-frequency Receiver
- Supports Drone CAN Protocol
- Sensor: Compass: RM3100, Grro/ACC: ICM42688
- Antenna 1 (main): BDS:B11, B21, B31; GPS:L1C/A, L2P/L2C, L5; GLONOSS:L1, L2; Galileo: E1, E5a, E5b; QZSS:L1, L2, L5
- Antenna 2: BDS:B11, B21, B31 GPS:L1C/A, L2C; GLONOSS:L1, L2 Galileo: E1, E5b QZSS:L1, L2
- Position Accuracy: Single point positioning: horizontal 1.5M/elevation: 2.5m DGPS (assisted positioning): horizontal 0.4M+1PPM/ elevation: 0.8m+1 PPM, RTK: Horizontal 0.8cm+1PPM/Elevation: 1.5cm+1PPM
- Estimate yaw accuracy: 0.2 degrees/1m (distance between antenna 1 and antenna 2)
- Max star: Single: 28+ RTK:50 +
- Positioning speed: Cold start <30s/auxiliary start <5s
- Data refresh rate: 5Hz (default); Max 20Hz
- Data format: RTCM3.X
- Data protocol: Dronecan/NMEA
- Interface: Antenna interface *2, CAN*1, UART*1, DSU*1, USB*1
Package Includes:
1 x CUAV C-RTK 2 HP GNSS Heading Module & Accessories as shown in image.
Quick specs
- Item Type
- GNSS Module
- Processor
- STM32F4
- Module Type
- All-constellation Multi-frequency
- Channels
- 1408
- GNSS
- BDS/GPS/GLONASS/Galileo/QZSS
- Length (mm)
- 50



















