Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by CUAV, this drone flight controllers is a good fit for RC and FPV hobbyists. Main specs: item type Flight Controller; processor STM32H743; operating frequency (mhz) 480. Check that your power source supplies 4.5 to 5.5 before connecting it.

Key Highlights

  • Item Type: Flight Controller
  • Processor: STM32H743
  • Operating Frequency (MHz): 480

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Check the size, weight and connector against your model, and keep spare props or parts for the first flights.

Specifications

Item TypeFlight Controller
ProcessorSTM32H743
Operating Frequency (MHz)480
Flash Memory2mb
RAM1MB
SensorICM-42688-P, ICM-20689, RM3100, MS5611, ADIS16470
UART5
I2C6
PWM Output14(12 of which support dshot protocol)
Input Connector1(Compatible with DSM / SBUS / PPM remote control signal protocol)
RSSI Input(V)PWM or 3.3 analog voltage
CAN2
Input Power (W)2
GPS UART2
Operating Voltage (V)4.5 to 5.5
Servo input voltage (V)0-36
Operating Temperature (°C)-20 to 85 °C
Humidity Range5-95%
Dimensions (L x W x H) mm77 x 45.5 x 39
Weight (g)105g
Shipping Weight0.343 kg
Shipping Dimensions15 × 15 × 5 cm

Overview

The CUAV X7+ Pro Flight Controller | Autopilot For PX4 APM Drone Quadcopter Pixhawk, made by CUAV, is listed in our drone flight controllers range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Flight Controller
  • Processor: STM32H743 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Operating Frequency (MHz): 480 (make sure the rest of your system works at this frequency)
  • Flash Memory: 2mb (more memory leaves room for larger programs and buffers)
  • RAM: 1MB (more memory leaves room for larger programs and buffers)
  • Sensor: ICM-42688-P, ICM-20689, RM3100, MS5611, ADIS16470
  • UART: 5
  • I2C: 6

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

X7+ Pro is an advanced autopilot independently designed by CUAV. X7+ Pro autopilot adopts STM32H743 processor, with processing speed up to 480MHz, 1M storage and 2M flash memory, built-in 3 sets of latest Invensense + Bosch + TE series combined sensors and industrial RM3100 compass, with better stability and anti-interference, with CUAV patent shock absorption design and temperature compensation system, X7 pro also uses car gauge ADIS16470 sensor to further improve flight stability. CUAV X7+ Flight Controller CUAV X7+ Pro Flight Controller Autopilot For PX4 APM Drone Quadcopter Pixhawk; it uses a higher performance STM32H7 series processor than the previous-generation flight controller (FMUv5) and integrates high-precision industrial-grade sensors and ultra-low temperature drift sensors, more stable and reliable. Compared with the previous flight controller, it has better performance and more reliability. This board can run ArduPilot firmware perfectly, and it will also be compatible with PX4 firmware. CUAV X7+ Flight Controller X7+ Pro replaces the ICM-20689 chip on the X7+ with a high-end ADI16470 chip. Because of its excellent gyro and acceleration drift performance, it has been used in some cutting-edge aerospace projects in the past. This time, we introduced it into the open-source flight control, which is integrated into the IMU with triple redundancy and exerts excellent performance. CUAV X7+ Pro Flight Controller Note: X7+ Pro flight controller is compatible with ArduPilot 4.10/ PX4 1.12.3 or higher firmware.

Features:

  1. Aero-Grade ADI16470 Sensor
  2. Built-in shock absorption
  3. 3 sets of Imus support intelligent failover
  4. Support temperature compensation
  5. Support CAN ammeter
  6. Modular design, support custom baseboard
  7. Modular design can be DIY carrier board
  8. Support USB_HS, download logs faster
  9. Support more dshot output
  10. Support IMU heating, make the sensor work better
  11. Dedicated Uavcan battery port
  12. High-precision industrial sensor(ADIS16470+RM3100)

Package Includes:

1 x CUAV X7+ Pro Flight Controller

2 x 12C/CAN cable

1 x ADC3.3 cable

1 x RSSI cable(X7 series)

1 x CAN PMU Lite Power Module

1 x Dupont cable

1 x CAN extension board

1 x Pw-Link module

1 x USB-TypeC cable

1 x 16G Memory card

Quick specs

Item Type
Flight Controller
Processor
STM32H743
Operating Frequency (MHz)
480
Flash Memory
2mb
RAM
1MB
Sensor
ICM-42688-P, ICM-20689, RM3100, MS5611, ADIS16470
See all specifications