
1 / 3 · Click to enlarge
AI Summary
The Robo Pico is an expansion board that gives Raspberry Pi Pico and Pico W builds a 2-channel motor driver, four servo ports and seven Grove connectors. It also handles USB, LiPo or Vin power with onboard charging, so robot and IoT projects need far less wiring.
Key Highlights
- 2-channel brushed DC motor driver, 1A per channel
- Four servo motor ports rated 3.6–6V
- Seven Grove ports plus a Maker port and GPIO breakout
- Automatic power selection from USB 5V, LiPo or Vin
- Onboard RGB LEDs, piezo buzzer and two programmable buttons
- Quick Test buttons and motor output LEDs for checks
Ideal For
- Students learning robotics with Raspberry Pi Pico
- Hobbyists building small WiFi-controlled robots
- Makers prototyping IoT sensor nodes with Grove modules
- Educators running hands-on electronics workshops
- Prototypers who want motor and servo control without extra wiring
Buying Tip
Confirm your motors draw no more than 1A per channel and that you have a Raspberry Pi Pico board, since the Pico itself is not included.
Elecvora expert review
Our verdict
The Robo Pico is a well-organised expansion board that saves a lot of wiring in Pico-based robotics and IoT projects. It is a sensible starting point for anyone who wants motors, servos and Grove sensors on one platform.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Motor driver, servo ports and Grove connectors on a single board
- Automatic power selection with built-in LiPo charging
- Quick Test buttons and output LEDs simplify debugging
- Useful onboard RGB LEDs, buzzer and programmable buttons
Cons
- Raspberry Pi Pico board is not included
- Motor channels are limited to 1A each, so large motors are unsuitable
- Requires a separate LiPo or other power source for untethered use
Best for
Beginners and hobbyists building small Pico-based robots and IoT devices
Not ideal for
Projects needing high-current motors above 1A per channel
Specifications
| Power Type | USB 5V, LiPo (1-cell), or Vin (3.6–6V) with built-in charger |
|---|---|
| Motor Driver | 2 brushed DC motors or 1 stepper motor (up to 1A/channel) |
| No. of I/O pins | 7 Grove ports, 1 Maker port, GPIO breakout |
| Shipping Weight | 0.08 kg |
| Shipping Dimensions | 11 × 9 × 3 cm |
What's in the box
- 1x Robo Pico board
- 4x Grove to female header cables
- 1x transparent Phillips head screwdriver
- 1x silicone rubber feet pack of 4
- 1x 1 metre USB micro B cable
Frequently Asked Questions
Which Raspberry Pi Pico boards does the Robo Pico support?
How many motors can I drive?
How is the board powered?
What comes in the package?
Can I use servos and Grove sensors at the same time?
How do I check the board before coding?
Overview
The Cytron Robo Pico is an expansion board for Raspberry Pi Pico family boards, built to remove the repetitive wiring that slows down robotics and IoT builds. Instead of stacking a separate motor driver, servo headers and sensor adapters, you get them on one board that plugs into your Pico. Motors, servos, Grove modules and breakout pins all share a single, clearly arranged platform.
It is aimed at makers who have outgrown a breadboard but do not want a custom PCB. Students, hobbyists and prototypers can assemble a moving robot or a connected sensor node with fewer parts and fewer points of failure.
Key Features
- Motor control on board: a 2-channel driver runs two brushed DC motors or one stepper motor at up to 1A per channel.
- Servo-ready: four servo ports accept 3.6–6V servos for pan-tilt heads, arms or steering.
- Flexible I/O: seven Grove ports, one Maker port and a GPIO breakout cover digital, analog and bus-based modules.
- Interactive extras: two RGB LEDs, a piezo buzzer and two programmable buttons support status feedback and user input.
- Smart power: the board selects automatically between USB 5V, a 1-cell LiPo or a 3.6–6V Vin input, with built-in charging and protection.
- Easy testing: Quick Test buttons and motor output LEDs let you confirm wiring before writing code.
Specifications Explained
Motor driver
The 1A-per-channel rating sets the practical limit for your motors. Small geared DC motors for a rover or a small arm fit comfortably; check your motor's stall current before connecting it. The same channels can drive one stepper motor for precise positioning tasks.
Power options
Because the board chooses between USB 5V, a single-cell LiPo and a 3.6–6V Vin source automatically, you can develop over USB and then switch to battery power without rewiring. The onboard charger means a LiPo can be topped up through the board rather than a separate charger.
Connectors
Seven Grove ports suit plug-and-play sensors and outputs, the Maker port handles a small add-on, and the GPIO breakout exposes remaining pins for custom wiring. Together they cover most starter robotics and IoT needs.
Compatibility and Requirements
The Robo Pico is designed for Raspberry Pi Pico 2, Pico and Pico W boards. A Raspberry Pi Pico board is required to use the expansion board and is not listed among the included items. Motors, servos, Grove modules and a suitable power source are also needed for a working build.
Typical Uses
- WiFi-controlled robots built around a Pico W
- Line-following and obstacle-avoiding rovers
- Servo-driven pan-tilt mounts and small arms
- Classroom and workshop electronics projects
- Connected sensor nodes using Grove modules
What's in the Box
- 1x Robo Pico board
- 4x Grove to female header cables
- 1x transparent Phillips head screwdriver
- 1x pack of four silicone rubber feet
- 1x 1 metre USB micro B cable
Quick specs
- Power Type
- USB 5V, LiPo (1-cell), or Vin (3.6–6V) with built-in charger
- Motor Driver
- 2 brushed DC motors or 1 stepper motor (up to 1A/channel)
- No. of I/O pins
- 7 Grove ports, 1 Maker port, GPIO breakout
- Shipping Weight
- 0.08 kg
- Shipping Dimensions
- 11 × 9 × 3 cm



















