Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A ready-to-use brushed DC motor driver with potentiometer speed control and rocker switch direction selection. No microcontroller or coding required, just connect a 7-30V motor and go.

Key Highlights

  • Single-channel brushed DC motor driver with 10A continuous, 30A peak
  • Potentiometer speed control and 3-way rocker switch for direction
  • Operates on motor voltages from 7V to 30V
  • Onboard push buttons for quick motor testing
  • Regenerative braking for efficient stops
  • No microcontroller or programming needed

Ideal For

  • Beginners starting with DC motor control
  • Makers building robotics projects
  • Educators teaching motion control basics
  • DIY enthusiasts creating automated systems
  • Hobbyists needing simple speed and direction control

Buying Tip

Confirm your motor's continuous current is 10A or less and its voltage falls within 7-30V to ensure compatibility.

Elecvora expert review

Our verdict

The Cytron MD10POT offers a simple, hands-on solution for controlling brushed DC motors without programming. Its integrated potentiometer and switch make it ideal for beginners and quick prototyping.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • No microcontroller or coding required
  • Includes potentiometer and rocker switch
  • Onboard test buttons for immediate verification
  • Regenerative braking for efficient stops
  • Compact and lightweight design

Cons

  • No reverse polarity protection
  • Potentiometer control does not accept external analog voltage
  • Limited to single-channel operation

Best for

Beginners and makers needing simple manual control of a brushed DC motor

Not ideal for

Advanced users requiring precise digital control or multi-channel operation

Specifications

Item TypeMotor Driver
Model SeriesMD Series
Voltage Rating (V)7 to 30
Current Rating (A)10 to 30
Supply Voltage7 ~ 30
Motor Current (A)10, Continuous
Max. Operating Current (A)30, Peak (Less than 10 seconds)
PWM Generator Frequency9 ~ 11 kHz
Length (mm)81.3
Width (mm)48.3
Weight (g)45
Shipping Weight0.05 kg
Shipping Dimensions9 × 5 × 3 cm

Frequently Asked Questions

What type of motor can I use with the MD10POT?
You can use brushed DC motors with two terminals, operating voltage from 7V to 30V, rated current up to 10A, and peak current up to 30A.
Do I need a microcontroller to use this driver?
No, the MD10POT works standalone using the included potentiometer and rocker switch. However, PWM and DIR pads are available for external control if needed.
What is included in the package?
The package includes the MD10POT board, a 10K potentiometer, and a 3-way rocker switch. Please verify with the retailer for any additional items.
Can I control the motor with an external analog voltage?
No, the potentiometer control is designed for the included 10K potentiometer and does not work with analog voltage from an external controller.
Is there reverse polarity protection?
No, the board does not have reverse polarity protection. Double-check the motor voltage connections before powering up to avoid damage.
What is the maximum current the driver can handle?
The MD10POT can handle up to 10A continuous and 30A peak for less than 10 seconds.

Overview

The Cytron MD10POT is a compact, single-channel motor driver designed for brushed DC motors. It provides a straightforward way to control motor start/stop, direction and speed using physical controls, without the need for a microcontroller or any coding. The board includes a 10K potentiometer for speed adjustment and a 3-way rocker switch for activation and direction selection. Two onboard push buttons let you test the motor immediately after wiring. For more advanced setups, PWM, DIR and GND pads are available for external signal control.

Key Features

  • Potentiometer speed control: Turn the included 10K potentiometer to vary motor speed smoothly.
  • 3-way rocker switch: Select start/stop and clockwise or counter-clockwise rotation.
  • Onboard test buttons: Quickly verify motor operation without external equipment.
  • Regenerative braking: Helps bring the motor to a controlled stop.
  • Wide voltage range: Supports motor supply voltages from 7V to 30V.
  • High current capability: Handles up to 10A continuous and 30A peak for less than 10 seconds.

Specifications Explained

Voltage rating (7-30V): Match your motor's rated voltage within this range. Do not exceed 30V.

Current rating (10A continuous, 30A peak): The driver can supply 10A continuously; higher currents up to 30A are allowed for short bursts under 10 seconds. Ensure your motor's continuous current does not exceed 10A.

PWM frequency (9-11 kHz): The onboard PWM generator operates in this range, suitable for most brushed DC motors.

Dimensions and weight: The board measures 81.3mm x 48.3mm and weighs 45g, making it easy to mount in small projects.

Compatibility and Requirements

The MD10POT works with brushed DC motors that have two terminals, an operating voltage between 7V and 30V, a rated current of 10A or less, and a peak current of 30A or less. It requires a separate motor power supply within the specified voltage range. Note that the board does not include reverse polarity protection, so double-check the motor voltage connections before powering up. The potentiometer control is designed for the included 10K potentiometer and does not work with analog voltage from an external controller. For PWM and DIR control, use the labeled pads and refer to the datasheet.

Typical Uses

  • DIY robotics and remote-controlled vehicles
  • Automated guided vehicles and small carts
  • Conveyor belts and linear actuators
  • Educational projects and motion control experiments
  • Any application needing simple bidirectional motor control

What's in the Box

Package contents are not specified. Please check the product listing for details.

Quick specs

Item Type
Motor Driver
Model Series
MD Series
Voltage Rating (V)
7 to 30
Current Rating (A)
10 to 30
Supply Voltage
7 ~ 30
Motor Current (A)
10, Continuous
See all specifications