
1 / 5 · Click to enlarge
AI Summary
A single-channel brushed DC motor driver rated 20A continuous and 60A peak across 6V to 30V, controllable with PWM and DIR signals. Onboard test buttons and output LEDs let you verify motor operation before wiring up a controller.
Key Highlights
- Bidirectional control of one brushed DC motor
- 6V to 30V operating voltage, 20A continuous and 60A peak
- PWM and DIR inputs with 1.8V to 12V logic compatibility
- Onboard test buttons and motor output LEDs
- Active overcurrent limiting and temperature protection
- Compact 86 x 52 mm board weighing 43 g
Ideal For
- Robotics builders driving high-current brushed DC motors
- AGV and mobile robot developers
- Solar tracker and automation machine designers
- Makers using Arduino, Raspberry Pi or PLC controllers
- Game simulator and motion platform hobbyists
Buying Tip
Confirm your motor's continuous current draw stays within 20A and your supply sits between 6V and 30V, and double-check battery polarity before the first power-up since there is no reverse-voltage protection.
Elecvora expert review
Our verdict
The MD20A is a practical choice for builders who need a compact, heatsink-free driver for a single powerful brushed motor. Its simple PWM and DIR interface and onboard test buttons make commissioning quick, while current and temperature protection add confidence under load.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 20A continuous and 60A peak for demanding brushed motors
- Wide 1.8V to 12V logic compatibility
- Onboard test buttons and output LEDs simplify checks
- Overcurrent, temperature and undervoltage protection
Cons
- No reverse-voltage protection on the power input
- Single motor channel only
- Requires a separate host controller for normal operation
Best for
Robots and automation builds using one high-current brushed DC motor
Not ideal for
Projects needing multi-motor control or reverse-polarity-safe power input
Specifications
| Item Type | Motor Driver |
|---|---|
| Model Series | MD Series |
| Voltage Rating (V) | 6 to 30 |
| Current Rating (A) | 20 to 60 |
| Model No. / Name | MD20A |
| Supply Voltage | 6 ~ 30 |
| Input current | 20A continuous |
| Peak Current (A) | 60 |
| PWM frequency | 20 KHz |
| Length (mm) | 86 |
| Width (mm) | 52 |
| Weight (g) | 43 |
| Shipping Weight | 0.07 kg |
| Shipping Dimensions | 8 × 5 × 3 cm |
What's in the box
- 1 x Cytron 20Amp 6V-30V DC Motor Driver MD20A
- 1 x Quick Start Guide
- 4 x PCB Spacer
Frequently Asked Questions
What voltage range does the MD20A support?
How much current can it handle?
Which controllers can drive it?
Can I test it without a controller?
What is included with the driver?
Is the power input protected against reverse polarity?
Overview
The Cytron MD20A is a single-channel motor driver for brushed DC motors that need more current than a typical small driver module can supply. It works across a 6V to 30V supply range and delivers 20A continuously, with a 60A peak rating for short bursts. The discrete NMOS H-bridge design means the board manages this current without a heatsink, keeping the assembly compact at 86 mm by 52 mm and 43 g.
Two control inputs are all you need: PWM for speed and DIR for direction. Because the inputs accept logic voltages from 1.8V to 12V, the MD20A fits a wide range of host controllers, from small microcontroller boards to industrial PLCs.
Key Features
- Single motor, bidirectional: one brushed DC motor can be driven forward and reverse.
- High current handling: 20A continuous and 60A peak output.
- Simple control: PWM and DIR inputs, compatible with 1.8V, 3.3V, 5V and 12V logic.
- Bench testing built in: onboard buttons and motor output LEDs allow a functional check without a host controller.
- Protection suite: overcurrent protection with active current limiting, temperature protection and undervoltage shutdown.
- PWM support: operates at PWM frequencies up to 20 kHz and supports sign-magnitude and locked-antiphase operation.
Specifications Explained
Voltage range (6V to 30V): match your motor and battery to this window. Running below 6V or above 30V is outside the board's design range.
Current ratings: 20A continuous is the working load the driver is built for; 60A peak covers brief spikes such as startup inrush or sudden load changes. Continuous operation near the limit depends on airflow and mounting.
PWM frequency: the output frequency follows the input frequency, up to 20 kHz. Higher PWM frequencies can reduce audible motor noise.
Protection behaviour: when current demand exceeds what the board can support, the driver limits current rather than shutting down abruptly. The limiting threshold also drops as board temperature rises, so the MD20A protects its MOSFETs while still delivering as much as conditions allow.
Compatibility and Requirements
The MD20A is controlled by PWM and DIR signals and accepts input logic from 1.8V to 12V, making it suitable for Arduino, Raspberry Pi and PLC-based systems. A host controller is needed for normal operation, although the onboard buttons allow basic testing first. Note that the power input has no reverse-voltage protection: connecting the battery with reversed polarity will damage the driver immediately, so check wiring before applying power.
Typical Uses
- Automated guided vehicles and mobile robots
- Solar trackers and positioning mechanisms
- Game simulators and motion platforms
- General automation machines with brushed DC motors
What's in the Box
- 1 x Cytron 20Amp 6V-30V DC Motor Driver MD20A
- 1 x Quick Start Guide
- 4 x PCB Spacer

Quick specs
- Item Type
- Motor Driver
- Model Series
- MD Series
- Voltage Rating (V)
- 6 to 30
- Current Rating (A)
- 20 to 60
- Model No. / Name
- MD20A
- Supply Voltage
- 6 ~ 30



















